Topic: NVIDIA Profile Inspector and P106-100 cards. (Read 1031 times)
Finally I succedeed with P106-100 and 388.13 Nvidia drivers and nvidia-smi -dm 0. nvidiainspector is working now! Interesting that 388.77 drivers gave error 43 after nvidia-smi -dm 0 and restart.
You can try test my open source NVAPI overclock tool. It is inspired / reverse engineered code from NVIDIA Inspector.
https://github.com/Demion/nvapioc
Any chance you can help me with setting up my .bat bile? https://github.com/Demion/nvapioc
MSI Afterburner 4.6.0 Beta 10 can undervolt gpu core to 700 mV. But I have hashrate drops when lowering voltage P104 below 850mv. Same settings 1506core/ +700mem, 850mv 40mh/s, 800mv and lower drops to 35-37mh/s. This issue happens only with gigabyte p104, msi works fine. Any ideas what happens?
found the issue, tried 391 driver and got SMI to work properly. Going to try updating from that driver see what happens.
Edit: updated driver and back to same old thing. WDDM not working. Assuming somethings going on with newer Nvidia drivers. Going to try older 400 series driver next see what happens.
Edit #2: Seems 399 is working for SMI. for P104-100 I haven't seen any difference in wattage using Inspector vs MSIafterburner. at best 3 watts maybe?
Can confirm that drivers 399.07 and WDDM mode has made Inspector see P104-100. I managed to lower each card for about -15watts compared to Afterburner. Most cards work at 700 mV.Edit: updated driver and back to same old thing. WDDM not working. Assuming somethings going on with newer Nvidia drivers. Going to try older 400 series driver next see what happens.
Edit #2: Seems 399 is working for SMI. for P104-100 I haven't seen any difference in wattage using Inspector vs MSIafterburner. at best 3 watts maybe?
found the issue, tried 391 driver and got SMI to work properly. Going to try updating from that driver see what happens.
Edit: updated driver and back to same old thing. WDDM not working. Assuming somethings going on with newer Nvidia drivers. Going to try older 400 series driver next see what happens.
Edit #2: Seems 399 is working for SMI. for P104-100 I haven't seen any difference in wattage using Inspector vs MSIafterburner. at best 3 watts maybe?
Can confirm that drivers 399.07 and WDDM mode has made Inspector see P104-100. I managed to lower each card for about -15watts compared to Afterburner. Most cards work at 700 mV.Edit: updated driver and back to same old thing. WDDM not working. Assuming somethings going on with newer Nvidia drivers. Going to try older 400 series driver next see what happens.
Edit #2: Seems 399 is working for SMI. for P104-100 I haven't seen any difference in wattage using Inspector vs MSIafterburner. at best 3 watts maybe?
Glad to help! However I noticed serious hashrate drops when lowering voltage using Nvinspector around 1500-1600mhz is needed to achieve full hashrate with P104's. I've had mine Overclocked to +800 on memory +150 core @70% power on MSI afterburner. They're doing about 40-40.5mh/s @ 125w
P106s will more likely be different. Those should do about 65w-70w on ETH-hash.
found the issue, tried 391 driver and got SMI to work properly. Going to try updating from that driver see what happens.
Edit: updated driver and back to same old thing. WDDM not working. Assuming somethings going on with newer Nvidia drivers. Going to try older 400 series driver next see what happens.
Edit #2: Seems 399 is working for SMI. for P104-100 I haven't seen any difference in wattage using Inspector vs MSIafterburner. at best 3 watts maybe?
Can confirm that drivers 399.07 and WDDM mode has made Inspector see P104-100. I managed to lower each card for about -15watts compared to Afterburner. Most cards work at 700 mV. Edit: updated driver and back to same old thing. WDDM not working. Assuming somethings going on with newer Nvidia drivers. Going to try older 400 series driver next see what happens.
Edit #2: Seems 399 is working for SMI. for P104-100 I haven't seen any difference in wattage using Inspector vs MSIafterburner. at best 3 watts maybe?
You can try test my open source NVAPI overclock tool. It is inspired / reverse engineered code from NVIDIA Inspector.
https://github.com/Demion/nvapioc
https://github.com/Demion/nvapioc
actually switching the driver to WDDM mode is not needed to control GPU voltages and clocks, it's a bug in nvidiaInspector.
if someone has its source code then it would be fairly easy to fix.
if someone has its source code then it would be fairly easy to fix.
AFAIK you can set voltage for the P2 state using NVAPI https://docs.nvidia.com/gameworks/content/gameworkslibrary/coresdk/nvapi/structNV__GPU__PSTATE20__BASE__VOLTAGE__ENTRY__V1.html
...
NvAPI_GPU_SetPstates20
BTW 440W is for 6 or 8 cards rig? For 6 cards that is still unnecessary high
...
NvAPI_GPU_SetPstates20
BTW 440W is for 6 or 8 cards rig? For 6 cards that is still unnecessary high
found the issue, tried 391 driver and got SMI to work properly. Going to try updating from that driver see what happens.
Edit: updated driver and back to same old thing. WDDM not working. Assuming somethings going on with newer Nvidia drivers. Going to try older 400 series driver next see what happens.
Edit #2: Seems 399 is working for SMI. for P104-100 I haven't seen any difference in wattage using Inspector vs MSIafterburner. at best 3 watts maybe?
Edit: updated driver and back to same old thing. WDDM not working. Assuming somethings going on with newer Nvidia drivers. Going to try older 400 series driver next see what happens.
Edit #2: Seems 399 is working for SMI. for P104-100 I haven't seen any difference in wattage using Inspector vs MSIafterburner. at best 3 watts maybe?
I have tested many versions of Nvidia drivers,only 382.53 can work with Nvidia profile inspector on P106-100......with other drivers the Nvidia profile inspector can not even recognize any P106 card
Unfortunately latest miners, such as CryptoDredge, T-Rex work only with latest drivers. There is no problem to use MSI Afterburner, only downvolting is limited to 800 mV. Can anybody confirm NVIDIA inspector is incompitable with P106-100 CARDS ?
I can confirm that it works fine with P102/P104/P106 cards in WDDM mode with any recent driver version.regarding 1066 - that's just one rig with one regular GPU. I always use Intel iGPU as primary. I have several rigs with only P102/P104/P106 cards on H110 Pro BTC+ and B250 Mining Expert MB's and I've never seen anything like the issue you are describing here. just switching the cards to WDDM mode and rebooting always worked for me.
I'm suffering the same issue. Got a P104-100 card and whenever I enable the WDDM mode I get Error code 43 as well with latest Nvidia 417 drivers. I have it hooked-up to a H110 Pro BTC+ and using intel iGPU. I tried both Forcing it and just regular, either way going to WDDM mode from TCC mode and doing a reboot gives me an erro 43 in Windows.
Can anybody confirm NVIDIA inspector is incompitable with P106-100 CARDS ?
I can confirm that it works fine with P102/P104/P106 cards in WDDM mode with any recent driver version.
regarding 1066 - that's just one rig with one regular GPU. I always use Intel iGPU as primary. I have several rigs with only P102/P104/P106 cards on H110 Pro BTC+ and B250 Mining Expert MB's and I've never seen anything like the issue you are describing here. just switching the cards to WDDM mode and rebooting always worked for me.
I have tested many versions of Nvidia drivers,only 382.53 can work with Nvidia profile inspector on P106-100......with other drivers the Nvidia profile inspector can not even recognize any P106 card
Can anybody confirm NVIDIA inspector is incompitable with P106-100 CARDS ?
I can confirm that it works fine with P102/P104/P106 cards in WDDM mode with any recent driver version.https://i.imgur.com/CjrFO3v.jpg
Can anybody confirm NVIDIA inspector is incompitable with P106-100 CARDS ?
I can confirm that it works fine with P102/P104/P106 cards in WDDM mode with any recent driver version.
I tried to use nvidia-smi -dm 0 and one of my cards become with 43 error, I changed again it to working state with command nvidia-smi -dm 1. I continue to use both nvidiainspector (650-700 mV for GTX1060 3 GB) and MSI Afterburner (PL 65 for P106-100) to undervolt my cards and there is no problem.
Can anybody confirm NVIDIA inspector is incompitable with P106-100 CARDS ?
I can confirm that it works fine with P102/P104/P106 cards in WDDM mode with any recent driver version.Can anybody confirm NVIDIA inspector is incompitable with P106-100 CARDS ?
I can confirm that it works fine with P102/P104/P106 cards in WDDM mode with any recent driver version. 
I have a GTX1060 6GB rig that I use with Nvidia profile Inspector because I can run it at only ~440watt.
I have a P106-100 rig now, but when I run the .bat file, nothing happens. I get the same hashrate.
I'm running with AB at ~500w. I know you can shave off 10w per card with inspector.
Are these cards incompatable with Nvidia inspector ?
put one more power supply unit or use for downvolting program msi afterburner https://www.youtube.com/watch?v=hOdfA9QVMKg I have a P106-100 rig now, but when I run the .bat file, nothing happens. I get the same hashrate.
I'm running with AB at ~500w. I know you can shave off 10w per card with inspector.
Are these cards incompatable with Nvidia inspector ?
Can anybody confirm NVIDIA inspector is incompitable with P106-100 CARDS ?
I have one P106-100 card in the rig with other 5 GTX1060 cards. I'm using nvidiainspector for 1060 and MSIAfterburner for P106-100. nvidiainspector is much better because it undervolts GPU Core to 650 mV. Unfortunately, it doesn't work with my MSI P106-100 card. I tried unsuccessfully different drivers, but P106-100 don't work with nvidiainspector. Latest NVIDIA relive drivers....for 1060 GPU's
"relive" is AMD drivers
Can anybody confirm NVIDIA inspector is incompitable with P106-100 CARDS ?
Latest NVIDIA relive drivers....for 1060 GPU's
which driver version are you using?
I've changed it. Now Phoenix miner says no available GPUs for mining ....
And have a "Code 43" in Device manager...
And have a "Code 43" in Device manager...
switch the driver from TCC to WDDM mode and it will work fine.
Code:
nvidia-smi -dm 0
I have a GTX1060 6GB rig that I use with Nvidia profile Inspector because I can run it at only ~440watt.
I have a P106-100 rig now, but when I run the .bat file, nothing happens. I get the same hashrate.
I'm running with AB at ~500w. I know you can shave off 10w per card with inspector.
Are these cards incompatable with Nvidia inspector ?
I have a P106-100 rig now, but when I run the .bat file, nothing happens. I get the same hashrate.
I'm running with AB at ~500w. I know you can shave off 10w per card with inspector.
Are these cards incompatable with Nvidia inspector ?
Jump to: