Okay. What is Stream (APP) SDK for? | Bitcointalksearch.org

OCedHrt

member

Activity: 111

Merit: 10

Quote from: hugolp on June 11, 2011, 11:18:06 PM

Quote from: Lightspeed on June 11, 2011, 02:39:47 PM

whats the difference between poclbm -v -w 128, with 2.1 vs the phatk kernel? and what settings do you use ?

Im using phoenix with the phatk kernel with 2.4. Phatk is designed for the 2.4 stack, and for me is faster than any other combination. I use VECTOR IBF_INT AGRESSION=12 WORKSIZE=256

Worksize=128 worked better at stock speed and light overclock, but when I overclocked over 1000MHz it was better workize=256.

Thanks for the info. Vector slows down hashing on my 4850. I will try BFI_INT but I think it may be the same. Recommendations I read are that BFI_INT is for 5xxx+. Also optimum worksize for 4850 seems to be 64.

hugolp

legendary

Activity: 1148

Merit: 1001

Radix-The Decentralized Finance Protocol

Quote from: Lightspeed on June 11, 2011, 02:39:47 PM

whats the difference between poclbm -v -w 128, with 2.1 vs the phatk kernel? and what settings do you use ?

Im using phoenix with the phatk kernel with 2.4. Phatk is designed for the 2.4 stack, and for me is faster than any other combination. I use VECTOR IBF_INT AGRESSION=12 WORKSIZE=256

Worksize=128 worked better at stock speed and light overclock, but when I overclocked over 1000MHz it was better workize=256.

OCedHrt

member

Activity: 111

Merit: 10

Quote from: Lightspeed on June 11, 2011, 02:27:58 PM

that matters a lot! youll eventually kill the hard if your running it so hot, it should be 80c or under

up the fan speed to a fixed max of 60 or 80%

My fan speed is already at 100%. Let me try a different gpu miner. I don't get such high temps using F@H for GPU though.

Lightspeed

full member

Activity: 126

Merit: 100

whats the difference between poclbm -v -w 128, with 2.1 vs the phatk kernel? and what settings do you use ?

hugolp

legendary

Activity: 1148

Merit: 1001

Radix-The Decentralized Finance Protocol

Quote from: Lightspeed on June 11, 2011, 02:17:58 PM

ATI Stream is essentially their implementation of opencl - the driver that allows you to mine on your ATI GPU

the SDK is refered to because you can download 2.1, 2.2, 2.3 and 2.4 - 2.1 being the fastest by far

It depends on the miner kernel you use. I have better results than anything else with 2.4 + phatk kernel. So for me, the 2.4 is the fastest.

Lightspeed

full member

Activity: 126

Merit: 100

that matters a lot! youll eventually kill the hard if your running it so hot, it should be 80c or under

up the fan speed to a fixed max of 60 or 80%

OCedHrt

member

Activity: 111

Merit: 10

Thanks for the answer. I don't think it matters for me - my card hits 110C and it downclocks to 500/750.

Lightspeed

full member

Activity: 126

Merit: 100

Quote from: OCedHrt on June 11, 2011, 02:20:23 PM

So basically Stream SDK is already installed with the driver and we should switch to 2.1?

yes

OCedHrt

member

Activity: 111

Merit: 10

So basically Stream SDK is already installed with the driver and we should switch to 2.1?

Lightspeed

full member

Activity: 126

Merit: 100

ATI Stream is essentially their implementation of opencl - the driver that allows you to mine on your ATI GPU

the SDK is refered to because you can download 2.1, 2.2, 2.3 and 2.4 - 2.1 being the fastest by far

install 11-5 drivers without ati stream 2.4 - or goto uninstall programs -> catalyst manage/change -> uninstall ATI Stream 2.4/etc

download and install 2.1

easy

OCedHrt

member

Activity: 111

Merit: 10

I don't have it installed and GPU mining on my ATI 4850 is working - although my card heats up and then drops to lowest clocks.

Topic: Okay. What is Stream (APP) SDK for? (Read 2091 times)