Hi forum,
I just got my hands on a T9 miner which has 2 boards working
I reseted and connected and unconnected everything but not working... anyone thinks it's worth giving it a try at repairing it? Thanks!!
These are the logs:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 27800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 258048
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map e6fd8000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 496 pages used for memmap
[ 0.000000] HighMem zone: 63488 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256528
[ 0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 884148K/1032192K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 148044K reserved, 253952K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to f0004000
[ 0.000000] zynq_clock_init: clkc starts at f0004100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000305] ps7-ttc #0 at f0006000, irq=43
[ 0.000615] Console: colour dummy device 80x30
[ 0.000650] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[ 0.090250] pid_max: default: 32768 minimum: 301
[ 0.090468] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.090490] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.092643] CPU: Testing write buffer coherency: ok
[ 0.092987] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.093048] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[ 0.093271] L310 cache controller enabled
[ 0.093290] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.171034] CPU1: Booted secondary processor
[ 0.260226] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.260357] Brought up 2 CPUs
[ 0.260376] SMP: Total of 2 processors activated.
[ 0.260385] CPU: All CPU(s) started in SVC mode.
[ 0.261035] devtmpfs: initialized
[ 0.263449] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.264653] regulator-dummy: no parameters
[ 0.272345] NET: Registered protocol family 16
[ 0.274642] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.276917] cpuidle: using governor ladder
[ 0.276929] cpuidle: using governor menu
[ 0.284303] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.285801] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.285815] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.285930] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[ 0.307352] bio: create slab at 0
[ 0.308743] vgaarb: loaded
[ 0.309469] SCSI subsystem initialized
[ 0.310462] usbcore: registered new interface driver usbfs
[ 0.310637] usbcore: registered new interface driver hub
[ 0.310859] usbcore: registered new device driver usb
[ 0.312144] media: Linux media interface: v0.10
[ 0.312303] Linux video capture interface: v2.00
[ 0.312543] pps_core: LinuxPPS API ver. 1 registered
[ 0.312555] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.312684] PTP clock support registered
[ 0.313033] EDAC MC: Ver: 3.0.0
[ 0.314061] Advanced Linux Sound Architecture Driver Initialized.
[ 0.316442] DMA-API: preallocated 4096 debug entries
[ 0.316456] DMA-API: debugging enabled by kernel config
[ 0.316538] Switched to clocksource arm_global_timer
[ 0.336764] NET: Registered protocol family 2
[ 0.337422] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.337520] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.337679] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.337750] TCP: reno registered
[ 0.337769] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.337819] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.338088] NET: Registered protocol family 1
[ 0.338449] RPC: Registered named UNIX socket transport module.
[ 0.338461] RPC: Registered udp transport module.
[ 0.338469] RPC: Registered tcp transport module.
[ 0.338478] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.338491] PCI: CLS 0 bytes, default 64
[ 0.338938] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.340957] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.342335] bounce pool size: 64 pages
[ 0.343228] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.343431] msgmni has been set to 1486
[ 0.344219] io scheduler noop registered
[ 0.344232] io scheduler deadline registered
[ 0.344271] io scheduler cfq registered (default)
[ 0.351793] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.351813] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.473628] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.046266] console [ttyPS0] enabled
[ 1.050552] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[ 1.058190] [drm] Initialized drm 1.1.0 20060810
[ 1.075026] brd: module loaded
[ 1.084408] loop: module loaded
[ 1.093828] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.099663] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.107429] libphy: XEMACPS mii bus: probed
[ 1.111800] ------------- phy_id = 0x3625e62
[ 1.116527] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.125451] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.132294] ehci-pci: EHCI PCI platform driver
[ 1.139614] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.146399] usbcore: registered new interface driver usb-storage
[ 1.153317] mousedev: PS/2 mouse device common for all mice
[ 1.159483] i2c /dev entries driver
[ 1.166377] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.171900] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.177816] Xilinx Zynq CpuIdle Driver started
[ 1.182661] sdhci: Secure Digital Host Controller Interface driver
[ 1.188860] sdhci: Copyright(c) Pierre Ossman
[ 1.193132] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.199957] mmc0: no vqmmc regulator found
[ 1.203967] mmc0: no vmmc regulator found
[ 1.246564] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.255240] usbcore: registered new interface driver usbhid
[ 1.260753] usbhid: USB HID core driver
[ 1.265447] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.271731] nand: Micron MT29F2G08ABAEAWP
[ 1.275707] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.281663] Bad block table found at page 131008, version 0x01
[ 1.287890] Bad block table found at page 130944, version 0x01
[ 1.293944] 3 ofpart partitions found on MTD device pl353-nand
[ 1.299711] Creating 3 MTD partitions on "pl353-nand":
[ 1.304815] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.312884] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.320200] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.329137] TCP: cubic registered
[ 1.332371] NET: Registered protocol family 17
[ 1.337108] Registering SWP/SWPB emulation handler
[ 1.342967] regulator-dummy: disabling
[ 1.347311] UBI: attaching mtd1 to ubi0
[ 1.872381] UBI: scanning is finished
[ 1.884009] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.891086] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.897847] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.904512] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.911390] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.917370] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.924477] UBI: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 40244519
[ 1.933346] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.942563] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.942569] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.946491] ALSA device list:
[ 1.946495] No soundcards found.
[ 1.962931] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.991991] UBIFS: recovery needed
[ 2.093355] UBIFS: recovery completed
[ 2.097047] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.102972] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.112106] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.121991] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.127029] UBIFS: media format: w4/r0 (latest is w4/r0), UUID D40982C6-E2F1-47EC-B21D-1B00F21DDB2A, small LPT model
[ 2.138320] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.145031] devtmpfs: mounted
[ 2.148159] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.982790] random: dd urandom read with 0 bits of entropy available
[ 3.376566]
[ 3.376566] bcm54xx_config_init
[ 3.986572]
[ 3.986572] bcm54xx_config_init
[ 7.987408] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 7.993511] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 22.814035] In axi fpga driver!
[ 22.817131] request_mem_region OK!
[ 22.820495] AXI fpga dev virtual address is 0xf01fe000
[ 22.825600] *base_vir_addr = 0x8c510
[ 22.840850] In fpga mem driver!
[ 22.843967] request_mem_region OK!
[ 22.847584] fpga mem virtual address is 0xf3000000
[ 23.655973]
[ 23.655973] bcm54xx_config_init
[ 24.285900]
[ 24.285900] bcm54xx_config_init
[ 28.286326] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 28.292432] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
This is XILINX board. Totalram: 1039794176
Detect 1GB control board of XILINX
DETECT HW version=0008c510
Miner Type = T9
AsicType = 1387
real AsicNum = 57
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[14] has core num=1
Chain[5] ASIC[17] has core num=1
Chain[5] ASIC[29] has core num=1
Chain[5] ASIC[32] has core num=2
Chain[5] ASIC[43] has core num=1
Check chain[5] PIC fw version=0x03
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[12] has core num=14
Chain[6] ASIC[13] has core num=1
Chain[6] ASIC[14] has core num=1
Chain[6] ASIC[36] has core num=5
Check chain[6] PIC fw version=0x03
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[15] has core num=1
Chain[7] ASIC[16] has core num=2
Chain[7] ASIC[21] has core num=1
Chain[7] ASIC[26] has core num=11
Chain[7] ASIC[32] has core num=1
Chain[7] ASIC[35] has core num=5
Chain[7] ASIC[37] has core num=1
Chain[7] ASIC[44] has core num=1
Chain[7] ASIC[55] has core num=14
Check chain[7] PIC fw version=0x03
get PIC voltage=177 on chain[5], value=840
get PIC voltage=177 on chain[6], value=840
get PIC voltage=10 on chain[7], value=970
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 29,-4,2,-4,0,0,0,0
chain[6] temp offset record: 29,-5,2,-4,0,0,0,0
chain[7] temp offset record: 29,-3,2,-4,0,0,0,0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
Start bmminer ...
Detect 1GB control board of XILINX
Miner Type = T9
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x0000ffff
Chain[J6] has backup chain_voltage=840
Chain[J6] test patten OK temp=59
Check chain[5] PIC fw version=0x03
Chain[J7] has backup chain_voltage=840
Chain[J7] test patten OK temp=63
Check chain[6] PIC fw version=0x03
Chain[J8] has backup chain_voltage=840
Chain[J8] test patten OK temp=61
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=177 value=840
Chain[J7] orignal chain_voltage_pic=177 value=840
Chain[J8] orignal chain_voltage_pic=10 value=970
Chain[J8] will use backup chain_voltage_pic=840 [177]
Chain[J8] get working chain_voltage_pic=177
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 57 asic
Chain[J7] has 57 asic
Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[14] has core num=1
Chain[J6] ASIC[17] has core num=1
Chain[J6] ASIC[29] has core num=1
Chain[J6] ASIC[32] has core num=2
Chain[J6] ASIC[43] has core num=1
Chain[J7] has core num in PIC
Chain[J7] ASIC[12] has core num=14
Chain[J7] ASIC[13] has core num=1
Chain[J7] ASIC[14] has core num=1
Chain[J7] ASIC[36] has core num=5
miner total rate=8428GH/s fixed rate=8000GH/s
read PIC voltage=970 on chain[5]
Chain:5 chipnum=57
Chain[J6] voltage added=0.1V
Chain:5 temp offset=-4
Chain:5 base freq=550
Asic[ 0]:593
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:587 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:593 Asic[ 7]:581 Asic[ 8]:600
Asic[ 9]:593 Asic[10]:575 Asic[11]:600 Asic[12]:593 Asic[13]:600 Asic[14]:562 Asic[15]:600 Asic[16]:600
Asic[17]:556 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600
Asic[25]:600 Asic[26]:600 Asic[27]:600 Asic[28]:600 Asic[29]:550 Asic[30]:600 Asic[31]:600 Asic[32]:550
Asic[33]:600 Asic[34]:600 Asic[35]:600 Asic[36]:600 Asic[37]:587 Asic[38]:600 Asic[39]:600 Asic[40]:600
Asic[41]:593 Asic[42]:600 Asic[43]:556 Asic[44]:600 Asic[45]:600 Asic[46]:600 Asic[47]:600 Asic[48]:600
Asic[49]:600 Asic[50]:600 Asic[51]:600 Asic[52]:600 Asic[53]:600 Asic[54]:600 Asic[55]:600 Asic[56]:600
Chain:5 max freq=600
Chain:5 min freq=550
read PIC voltage=970 on chain[6]
Chain:6 chipnum=57
Chain[J7] voltage added=0.1V
Chain:6 temp offset=-5
Chain:6 base freq=693
Asic[ 0]:706
Asic[ 1]:706 Asic[ 2]:706 Asic[ 3]:706 Asic[ 4]:706 Asic[ 5]:706 Asic[ 6]:706 Asic[ 7]:706 Asic[ 8]:706
Asic[ 9]:706 Asic[10]:706 Asic[11]:706 Asic[12]:693 Asic[13]:706 Asic[14]:706 Asic[15]:706 Asic[16]:706
Asic[17]:706 Asic[18]:706 Asic[19]:706 Asic[20]:706 Asic[21]:706 Asic[22]:706 Asic[23]:706 Asic[24]:706
Asic[25]:706 Asic[26]:706 Asic[27]:706 Asic[28]:706 Asic[29]:706 Asic[30]:706 Asic[31]:706 Asic[32]:706
Asic[33]:706 Asic[34]:706 Asic[35]:706 Asic[36]:700 Asic[37]:706 Asic[38]:706 Asic[39]:706 Asic[40]:706
Asic[41]:706 Asic[42]:706 Asic[43]:706 Asic[44]:706 Asic[45]:706 Asic[46]:706 Asic[47]:706 Asic[48]:706
Asic[49]:706 Asic[50]:706 Asic[51]:706 Asic[52]:706 Asic[53]:706 Asic[54]:706 Asic[55]:706 Asic[56]:706
Chain:6 max freq=706
Chain:6 min freq=693
Miner fix freq ...
read PIC voltage=970 on chain[5]
Chain:5 chipnum=57
Chain[J6] voltage added=0.1V
Chain:5 temp offset=-4
Chain:5 base freq=550
Asic[ 0]:593
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:587 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:593 Asic[ 7]:581 Asic[ 8]:600
Asic[ 9]:593 Asic[10]:575 Asic[11]:600 Asic[12]:593 Asic[13]:600 Asic[14]:562 Asic[15]:600 Asic[16]:600
Asic[17]:556 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600
Asic[25]:600 Asic[26]:600 Asic[27]:600 Asic[28]:600 Asic[29]:550 Asic[30]:600 Asic[31]:600 Asic[32]:550
Asic[33]:600 Asic[34]:600 Asic[35]:600 Asic[36]:600 Asic[37]:587 Asic[38]:600 Asic[39]:600 Asic[40]:600
Asic[41]:593 Asic[42]:600 Asic[43]:556 Asic[44]:600 Asic[45]:600 Asic[46]:600 Asic[47]:600 Asic[48]:600
Asic[49]:600 Asic[50]:600 Asic[51]:600 Asic[52]:600 Asic[53]:600 Asic[54]:600 Asic[55]:600 Asic[56]:600
Chain:5 max freq=600
Chain:5 min freq=550
read PIC voltage=970 on chain[6]
Chain:6 chipnum=57
Chain[J7] voltage added=0.1V
Chain:6 temp offset=-5
Chain:6 base freq=693
Asic[ 0]:706
Asic[ 1]:706 Asic[ 2]:706 Asic[ 3]:706 Asic[ 4]:706 Asic[ 5]:706 Asic[ 6]:706 Asic[ 7]:706 Asic[ 8]:706
Asic[ 9]:706 Asic[10]:706 Asic[11]:706 Asic[12]:693 Asic[13]:706 Asic[14]:706 Asic[15]:706 Asic[16]:706
Asic[17]:706 Asic[18]:706 Asic[19]:706 Asic[20]:706 Asic[21]:706 Asic[22]:706 Asic[23]:706 Asic[24]:706
Asic[25]:706 Asic[26]:706 Asic[27]:706 Asic[28]:706 Asic[29]:706 Asic[30]:706 Asic[31]:706 Asic[32]:706
Asic[33]:706 Asic[34]:706 Asic[35]:706 Asic[36]:700 Asic[37]:706 Asic[38]:706 Asic[39]:706 Asic[40]:706
Asic[41]:706 Asic[42]:706 Asic[43]:706 Asic[44]:706 Asic[45]:706 Asic[46]:706 Asic[47]:706 Asic[48]:706
Asic[49]:706 Asic[50]:706 Asic[51]:706 Asic[52]:706 Asic[53]:706 Asic[54]:706 Asic[55]:706 Asic[56]:706
Chain:6 max freq=706
Chain:6 min freq=693
max freq = 706
set baud=1
Chain[J6] PIC temp offset=29,-4,2,-4,0,0,0,0
Chain[J6] chip[112] use PIC middle temp offset=-4 typeID=55
New offset Chain[5] chip[112] local:28 remote:31 offset:27
Chain[J6] chip[112] get middle temp offset=27 typeID=55
Chain[J6] chip[4] use PIC middle temp offset=-4 typeID=55
New offset Chain[5] chip[4] local:27 remote:30 offset:27
Chain[J6] chip[4] get middle temp offset=27 typeID=55
Chain[J7] PIC temp offset=29,-5,2,-4,0,0,0,0
Chain[J7] chip[112] use PIC middle temp offset=-5 typeID=55
New offset Chain[6] chip[112] local:29 remote:34 offset:25
Chain[J7] chip[112] get middle temp offset=25 typeID=55
Chain[J7] chip[4] use PIC middle temp offset=-4 typeID=55
New offset Chain[6] chip[4] local:29 remote:34 offset:25
Chain[J7] chip[4] get middle temp offset=25 typeID=55
Chain[J6] set working voltage=840 [177]
Chain[J7] set working voltage=840 [177]
do heat board 8xPatten for 1 times
Check voltage total rate=8428
get PIC voltage=840 [177] on chain[5], check: must be < 970
get PIC voltage=840 [177] on chain[6], check: must be < 970
start send works on chain[5]
start send works on chain[6]
get send work num :51984 on Chain[5]
get send work num :51984 on Chain[6]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
get nonces on chain[5]
require nonce number:912
require validnonce number:51984
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=593 freq[01]=600 freq[02]=600 freq[03]=587 freq[04]=600 freq[05]=600 freq[06]=593 freq[07]=581
freq[08]=600 freq[09]=593 freq[10]=575 freq[11]=600 freq[12]=593 freq[13]=600 freq[14]=562 freq[15]=600
freq[16]=600 freq[17]=556 freq[18]=600 freq[19]=600 freq[20]=600 freq[21]=600 freq[22]=600 freq[23]=600
freq[24]=600 freq[25]=600 freq[26]=600 freq[27]=600 freq[28]=600 freq[29]=550 freq[30]=600 freq[31]=600
freq[32]=550 freq[33]=600 freq[34]=600 freq[35]=600 freq[36]=600 freq[37]=587 freq[38]=600 freq[39]=600
freq[40]=600 freq[41]=593 freq[42]=600 freq[43]=556 freq[44]=600 freq[45]=600 freq[46]=600 freq[47]=600
freq[48]=600 freq[49]=600 freq[50]=600 freq[51]=600 freq[52]=600 freq[53]=600 freq[54]=600 freq[55]=600
freq[56]=600
total valid nonce number:51984
total send work number:51984
require valid nonce number:51984
repeated_nonce_num:0
err_nonce_num:20009
last_nonce_num:37795
get nonces on chain[6]
require nonce number:912
require validnonce number:51984
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=706 freq[01]=706 freq[02]=706 freq[03]=706 freq[04]=706 freq[05]=706 freq[06]=706 freq[07]=706
freq[08]=706 freq[09]=706 freq[10]=706 freq[11]=706 freq[12]=693 freq[13]=706 freq[14]=706 freq[15]=706
freq[16]=706 freq[17]=706 freq[18]=706 freq[19]=706 freq[20]=706 freq[21]=706 freq[22]=706 freq[23]=706
freq[24]=706 freq[25]=706 freq[26]=706 freq[27]=706 freq[28]=706 freq[29]=706 freq[30]=706 freq[31]=706
freq[32]=706 freq[33]=706 freq[34]=706 freq[35]=706 freq[36]=700 freq[37]=706 freq[38]=706 freq[39]=706
freq[40]=706 freq[41]=706 freq[42]=706 freq[43]=706 freq[44]=706 freq[45]=706 freq[46]=706 freq[47]=706
freq[48]=706 freq[49]=706 freq[50]=706 freq[51]=706 freq[52]=706 freq[53]=706 freq[54]=706 freq[55]=706
freq[56]=706
total valid nonce number:51984
total send work number:51984
require valid nonce number:51984
repeated_nonce_num:0
err_nonce_num:23646
last_nonce_num:9527
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
setStartTimePoint total_tv_start_sys=188 total_tv_end_sys=189
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-57)
Asic[01]=72.8800 Asic[02]=73.4840 Asic[03]=71.5210 Asic[04]=67.0750 Asic[05]=68.7190 Asic[06]=68.3330 Asic[07]=67.6620 Asic[08]=166.580
Asic[09]=69.5080 Asic[10]=71.4700 Asic[11]=65.6990 Asic[12]=69.8260 Asic[13]=65.0450 Asic[14]=70.0610 Asic[15]=68.2660 Asic[16]=70.7490
Asic[17]=72.3260 Asic[18]=65.3470 Asic[19]=72.6110 Asic[20]=66.4370 Asic[21]=99.1030 Asic[22]=70.7320 Asic[23]=68.9370 Asic[24]=77.2590
Asic[25]=68.7860 Asic[26]=67.6620 Asic[27]=69.1890 Asic[28]=68.7360 Asic[29]=66.6720 Asic[30]=63.7190 Asic[31]=64.5920 Asic[32]=70.3970
Asic[33]=63.0150 Asic[34]=70.2120 Asic[35]=69.6920 Asic[36]=70.7320 Asic[37]=66.4200 Asic[38]=67.4610 Asic[39]=68.4670 Asic[40]=70.6990
Asic[41]=68.8530 Asic[42]=69.4570 Asic[43]=69.8600 Asic[44]=66.0350 Asic[45]=63.0650 Asic[46]=67.0240 Asic[47]=66.8230 Asic[48]=69.8090
Asic[49]=69.6750 Asic[50]=111.669 Asic[51]=75.6820 Asic[52]=78.3490 Asic[53]=93.4490 Asic[54]=71.8230 Asic[55]=69.9770 Asic[56]=66.7390
Asic[57]=69.3900
get RT hashrate from Chain[6]: (asic index start from 1-57)
Asic[01]=77.3420 Asic[02]=84.4900 Asic[03]=79.1040 Asic[04]=80.6310 Asic[05]=77.7280 Asic[06]=80.3120 Asic[07]=82.3250 Asic[08]=101.904
Asic[09]=81.1510 Asic[10]=76.5200 Asic[11]=83.1140 Asic[12]=79.2550 Asic[13]=76.1010 Asic[14]=80.6140 Asic[15]=79.7920 Asic[16]=80.1780
Asic[17]=78.7690 Asic[18]=80.5300 Asic[19]=81.3520 Asic[20]=80.2450 Asic[21]=86.3520 Asic[22]=83.7180 Asic[23]=81.2680 Asic[24]=81.9060
Asic[25]=80.4800 Asic[26]=86.0830 Asic[27]=86.0160 Asic[28]=80.9330 Asic[29]=82.6110 Asic[30]=81.1680 Asic[31]=79.1040 Asic[32]=81.1510
Asic[33]=83.0800 Asic[34]=78.9200 Asic[35]=81.7720 Asic[36]=81.0500 Asic[37]=83.0470 Asic[38]=85.2450 Asic[39]=76.7890 Asic[40]=84.1880
Asic[41]=79.0710 Asic[42]=84.2880 Asic[43]=81.9060 Asic[44]=85.8820 Asic[45]=79.3890 Asic[46]=80.5130 Asic[47]=78.2990 Asic[48]=75.0440
Asic[49]=82.1070 Asic[50]=80.5470 Asic[51]=86.4860 Asic[52]=81.7380 Asic[53]=83.5330 Asic[54]=85.4120 Asic[55]=81.5030 Asic[56]=78.0300
Asic[57]=82.1910
Check Chain[J6] ASIC RT error: (asic index start from 1-57)
Asic[08]=166.580000
Asic[50]=111.669000
Check Chain[J7] ASIC RT error: (asic index start from 1-57)
Asic[08]=101.904000
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[29] TempTypeID=55 middle offset=27
Chain[5] Chip[29] local Temp=54
Chain[5] Chip[29] middle Temp=68
Chain[5] Chip[2] TempTypeID=55 middle offset=27
Chain[5] Chip[2] local Temp=53
Chain[5] Chip[2] middle Temp=68
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[29] TempTypeID=55 middle offset=25
Chain[6] Chip[29] local Temp=57
Chain[6] Chip[29] middle Temp=69
Chain[6] Chip[2] TempTypeID=55 middle offset=25
Chain[6] Chip[2] local Temp=59
Chain[6] Chip[2] middle Temp=74
Done read temp on Chain[6]
set FAN speed according to: temp_highest=74 temp_top1[PWM_T]=74 temp_top1[TEMP_POS_LOCAL]=59 temp_change=1 fix_fan_steps=-6
set normal FAN speed... with fix_fan_steps=-7
FAN PWM: 54
read_temp_func Done!
CRC error counter=1