Author

Topic: One Hashboard Low Hashrate - High HWerro - Temp 15 Help (Read 153 times)

legendary
Activity: 2030
Merit: 1573
CLEAN non GPL infringing code made in Rust lang
So you are saying damaged temp sensor might cause hashboard to act like that? I will first try reset and then run again. As for sensor, it sometimes shows the temp and works normal, so weird but will do as u say. Hope it gets to a solution.

Btw, I have some more devices that shows 4-5 fans and none of them have issues like this so I dont think its related to fans.

I have seen that as well. Wrong sensor readings, than can even trigger the overheating protection and cause the unit to reboot constantly, even if "most" of the time the readings appear normal.

Indeed bOS would be a good solution if you don't want to replace an otherwise perfectly good hashboard. And yes, always test them one by one, and make sure to swap power and data cables around just to make sure. Tests should last an hour at least, look at those values.
jr. member
Activity: 60
Merit: 1
So you are saying damaged temp sensor might cause hashboard to act like that? I will first try reset and then run again. As for sensor, it sometimes shows the temp and works normal, so weird but will do as u say. Hope it gets to a solution.

Btw, I have some more devices that shows 4-5 fans and none of them have issues like this so I dont think its related to fans.
legendary
Activity: 3472
Merit: 3217
Playbet.io - Crypto Casino and Sportsbook
You can get some abnormal temp if your sensor is damaged.

Can you try to hard reset the miner by holding IPreporter/reset button for 15 seconds then release?
After that test it again if it still shows abnormal temp it means that the temp sensor is damaged.

You can do some troubleshooting and find which hashboard is showing 15 temp. You can follow this guide below:
---> " Test hashboard one by one"
Then try to clean the hashboard with abnormal temp or replace it with new hashboard.

Or if you don't care about the sensor you can switch to Braiins OS then disable the temp sensors and check the miner again. If your miner is stable you can stay with this OS.
newbie
Activity: 12
Merit: 0
try solve your fan problem 1st. U are having 4 Fans...
replace with a new fan n try again.
jr. member
Activity: 60
Merit: 1
That hashboard started to act weirdly. It shows 15 Temp and hashes at a low rate. I failed to figure out what might be wrong with it. Maybe some of you have experienced that and fixed the situation so that I wanted to ask for help. What might be the issue?

https://i.ibb.co/z7XLyT1/Ekran-Al-nt-s.jpg

Here is kernel

Code:
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06da8ac   (6987 kB)
[    0.000000]       .init : 0xc06db000 - 0xc070e380   ( 205 kB)
[    0.000000]       .data : 0xc0710000 - 0xc0757138   ( 285 kB)
[    0.000000]        .bss : 0xc0757144 - 0xc0797bfc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000302] ps7-ttc #0 at df804000, irq=43
[    0.000606] Console: colour dummy device 80x30
[    0.000635] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[    0.100249] pid_max: default: 32768 minimum: 301
[    0.100460] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.100480] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.102670] CPU: Testing write buffer coherency: ok
[    0.102991] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.103048] Setting up static identity map for 0x4cb118 - 0x4cb170
[    0.103268] L310 cache controller enabled
[    0.103287] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.180993] CPU1: Booted secondary processor
[    0.270225] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.270357] Brought up 2 CPUs
[    0.270375] SMP: Total of 2 processors activated.
[    0.270384] CPU: All CPU(s) started in SVC mode.
[    0.271044] devtmpfs: initialized
[    0.273477] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.274676] regulator-dummy: no parameters
[    0.282062] NET: Registered protocol family 16
[    0.284281] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.286555] cpuidle: using governor ladder
[    0.286568] cpuidle: using governor menu
[    0.293942] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.295458] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.295472] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.295585] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.317381] bio: create slab at 0
[    0.318785] vgaarb: loaded
[    0.319491] SCSI subsystem initialized
[    0.320528] usbcore: registered new interface driver usbfs
[    0.320713] usbcore: registered new interface driver hub
[    0.320931] usbcore: registered new device driver usb
[    0.321479] media: Linux media interface: v0.10
[    0.321640] Linux video capture interface: v2.00
[    0.321876] pps_core: LinuxPPS API ver. 1 registered
[    0.321888] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[    0.322009] PTP clock support registered
[    0.322367] EDAC MC: Ver: 3.0.0
[    0.323571] Advanced Linux Sound Architecture Driver Initialized.
[    0.326306] DMA-API: preallocated 4096 debug entries
[    0.326321] DMA-API: debugging enabled by kernel config
[    0.326395] Switched to clocksource arm_global_timer
[    0.347376] NET: Registered protocol family 2
[    0.348032] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.348089] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.348174] TCP: Hash tables configured (established 4096 bind 4096)
[    0.348217] TCP: reno registered
[    0.348233] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.348264] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.348501] NET: Registered protocol family 1
[    0.348839] RPC: Registered named UNIX socket transport module.
[    0.348852] RPC: Registered udp transport module.
[    0.348860] RPC: Registered tcp transport module.
[    0.348868] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.348880] PCI: CLS 0 bytes, default 64
[    0.349302] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.351298] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.353359] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.353555] msgmni has been set to 967
[    0.354321] io scheduler noop registered
[    0.354334] io scheduler deadline registered
[    0.354371] io scheduler cfq registered (default)
[    0.365112] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.365131] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.489423] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.056739] console [ttyPS0] enabled
[    1.060989] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.068609] [drm] Initialized drm 1.1.0 20060810
[    1.085604] brd: module loaded
[    1.094986] loop: module loaded
[    1.104356] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.110178] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.117947] libphy: XEMACPS mii bus: probed
[    1.122318] ------------- phy_id = 0x3625e62
[    1.127241] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.135844] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.142498] ehci-pci: EHCI PCI platform driver
[    1.149882] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.156703] usbcore: registered new interface driver usb-storage
[    1.163555] mousedev: PS/2 mouse device common for all mice
[    1.169736] i2c /dev entries driver
[    1.176646] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.182127] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.188039] Xilinx Zynq CpuIdle Driver started
[    1.192877] sdhci: Secure Digital Host Controller Interface driver
[    1.199073] sdhci: Copyright(c) Pierre Ossman
[    1.203345] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.210173] mmc0: no vqmmc regulator found
[    1.214189] mmc0: no vmmc regulator found
[    1.256412] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.265121] usbcore: registered new interface driver usbhid
[    1.270633] usbhid: USB HID core driver
[    1.275352] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.281652] nand: Micron MT29F2G08ABAEAWP
[    1.285617] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.291556] Bad block table found at page 131008, version 0x01
[    1.297775] Bad block table found at page 130944, version 0x01
[    1.303825] 3 ofpart partitions found on MTD device pl353-nand
[    1.309609] Creating 3 MTD partitions on "pl353-nand":
[    1.314698] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.322741] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.330045] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.340785] TCP: cubic registered
[    1.344017] NET: Registered protocol family 17
[    1.348714] Registering SWP/SWPB emulation handler
[    1.354586] regulator-dummy: disabling
[    1.358928] UBI: attaching mtd1 to ubi0
[    1.883765] UBI: scanning is finished
[    1.895360] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.902445] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.909206] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.915871] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.922749] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.928729] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.935836] UBI: max/mean erase counter: 6/3, WL threshold: 4096, image sequence number: 267830735
[    1.944792] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.954008] UBI: background thread "ubi_bgt0d" started, PID 1084
[    1.954014] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.958027] ALSA device list:
[    1.958031]   No soundcards found.
[    1.974312] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[    2.003247] UBIFS: recovery needed
[    2.093469] UBIFS: recovery completed
[    2.097157] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.103081] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.112215] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.122099] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.127140] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 68024B66-D002-4EAC-85B6-9A9AE3C1123E, small LPT model
[    2.138432] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.145374] devtmpfs: mounted
[    2.148510] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[    2.985726] random: dd urandom read with 1 bits of entropy available
[    3.396440]
[    3.396440] bcm54xx_config_init
[    4.456415]
[    4.456415] bcm54xx_config_init
[    7.457280] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    7.463372] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   20.067029] In axi fpga driver!
[   20.070099] request_mem_region OK!
[   20.073489] AXI fpga dev virtual address is 0xdf9fe000
[   20.078623] *base_vir_addr = 0xc51e
[   20.093162] In fpga mem driver!
[   20.096546] request_mem_region OK!
[   20.100050] fpga mem virtual address is 0xe2000000
[   20.895840]
[   20.895840] bcm54xx_config_init
[   21.995730]
[   21.995730] bcm54xx_config_init
[   24.996250] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   25.002265] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  325.692096]
[  325.692096] bcm54xx_config_init
[  328.692492] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[  328.698513] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  394.182433] random: nonblocking pool is initialized
log_level = 4
This is XILINX board. Totalram:       507486208
Detect 512MB control board of XILINX
mmap axi_fpga_addr = 0xb6fb4000
axi_fpga_addr data = 0xc51e
mmap fpga_mem_addr = 0xb5dad000
forceFreq=-1 forceFlag=0
min work minertest[0]:912


DETECT HW version=0000c51e
miner ID : 8044a5c676808814
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
read pic freq and badcore num...
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[10] has core num=4
Chain[5] ASIC[22] has core num=15
Chain[5] ASIC[33] has core num=1
Chain[5] ASIC[45] has core num=14
Chain[5] ASIC[47] has core num=15
Chain[5] ASIC[52] has core num=15
Chain[5] ASIC[55] has core num=3
Check chain[5] PIC fw version=0x03
read pic freq and badcore num...
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Check chain[6] PIC fw version=0x03
read pic freq and badcore num...
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[15] has core num=15
Check chain[7] PIC fw version=0x03
get PIC voltage=125 on chain[5], value=870
get PIC voltage=125 on chain[6], value=870
get PIC voltage=125 on chain[7], value=870
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
total_exist_chain_num = 3
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 3, total chain num = 3
single_board_frq_tuning enter
min_rate, des_rate, fix_volt:13800, 14000, 880
force_freq not set, don't need tuning
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 6544 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri May 31 10:59:27 CST 2019 type: Antminer S9
miner ID : 8044a5c676808814
get fan[1] speed=4800
Checking fans...
get fan[1] speed=4800
get fan[3] speed=4920
get fan[1] speed=4800
get fan[3] speed=4920
get fan[4] speed=4800
get fan[1] speed=4800
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x00 0x4f 0x00 0x4f 0x05 0x4f 0x00 0x4f 0x00 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x01 0x4f 0x01 0x4f 0x0f 0x4f 0x0f 0x4f 0x0f 0x4f 0x0f 0x4f 0x05 0x4f 0x07 0x4f 0x23 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=870
No scan based on domain
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x00 0x4c 0x00 0x4c 0x04 0x4c 0x0c 0x4c 0x00 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x05 0x4c 0x07 0x4c 0x23 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=3 : 0
Chain[J7] has backup chain_voltage=870
scan based on domain
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x00 0x4c 0x00 0x4c 0x04 0x4c 0x0c 0x4c 0x00 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x01 0x4c 0x01 0x4c 0x0f 0x4c 0x0f 0x4c 0x0f 0x4c 0x0f 0x4c 0x05 0x4c 0x07 0x4c 0x23 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=870
No scan based on domain
Check chain[7] PIC fw version=0x03
total_exist_chain_num = 3
Chain[J6] orignal chain_voltage_pic=125 value=870
Chain[J6] original chain_voltage_value=870 adjusted chain_voltage_value:870, value=870
Chain[J7] orignal chain_voltage_pic=125 value=870
Chain[J7] original chain_voltage_value=870 adjusted chain_voltage_value:870, value=870
Chain[J8] orignal chain_voltage_pic=125 value=870
Chain[J8] original chain_voltage_value=870 adjusted chain_voltage_value:870, value=870
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[10] has core num=4
Chain[J6] ASIC[22] has core num=15
Chain[J6] ASIC[33] has core num=1
Chain[J6] ASIC[45] has core num=14
Chain[J6] ASIC[47] has core num=15
Chain[J6] ASIC[52] has core num=15
Chain[J6] ASIC[55] has core num=3
Chain[J7] has core num in PIC
Chain[J8] has core num in PIC
Chain[J8] ASIC[15] has core num=15
miner total rate=14094GH/s ideal_total_hash_rate = 14000GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=687
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687
Asic[40]:687 Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687
Asic[48]:687 Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687
Asic[56]:687 Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687
Chain:5 max freq=687
Chain:5 min freq=681

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=662
Asic[ 0]:662 Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662
Asic[ 8]:662 Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662
Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662
Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662
Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662
Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662
Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662
Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:6 max freq=662
Chain:6 min freq=662

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=662
Asic[ 0]:662 Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662
Asic[ 8]:662 Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662
Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662
Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662
Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662
Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662
Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662
Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:7 max freq=662
Chain:7 min freq=662


Miner fix freq ...
totalRate = 14094, fixed_totalRate = 14140
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=687
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687
Asic[40]:687 Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687
Asic[48]:687 Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687
Asic[56]:687 Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687
Chain:5 max freq=687
Chain:5 min freq=681

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=662
Asic[ 0]:662 Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662
Asic[ 8]:662 Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662
Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662
Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662
Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662
Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662
Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662
Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:6 max freq=662
Chain:6 min freq=662

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=662
Asic[ 0]:662 Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662
Asic[ 8]:662 Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662
Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662
Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662
Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662
Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662
Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662
Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:7 max freq=662
Chain:7 min freq=662

max freq = 687
totalRate = 14094, fixed_totalRate = 14000
set baud=1
Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:42 remote:46 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=55
Chain[J7] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:42 remote:45 offset:28
Chain[J7] chip[244] get middle temp offset=28 typeID=55
Chain[J8] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[8] temp chip I2C addr=0x98
chain[8] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[8] chip[244] local:42 remote:46 offset:27
Chain[J8] chip[244] get middle temp offset=27 typeID=55
single board rate=4660 voltage limit=940 on chain[5]
get PIC voltage=870 on chain[5], check: must be < 940
single board rate=4754 voltage limit=940 on chain[6]
get PIC voltage=870 on chain[6], check: must be < 940
single board rate=4679 voltage limit=940 on chain[7]
get PIC voltage=870 on chain[7], check: must be < 940
setting to working voltage...
chain[5] set voltage to 930
chain[6] set voltage to 930
chain[7] set voltage to 930
chain[5] set voltage to 920
chain[6] set voltage to 920
chain[7] set voltage to 920
chain[5] set voltage to 910
chain[6] set voltage to 910
chain[7] set voltage to 910
chain[5] set voltage to 900
chain[6] set voltage to 900
chain[7] set voltage to 900
chain[5] set voltage to 890
chain[6] set voltage to 890
chain[7] set voltage to 890
chain[5] set voltage to 880
chain[6] set voltage to 880
chain[7] set voltage to 880
chain[5] set voltage to 870
chain[6] set voltage to 870
chain[7] set voltage to 870
start thread for read temp
setStartTimePoint total_tv_start_sys=898 total_tv_end_sys=899
restartNum = 2 , auto-reinit enabled...
mining.subscribe:{"id": 0, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9/14000"]}
bring_up_pcb_temp = 64
setting to working voltage...
voltage_check_done
avg hash rate = 12603.490264, ideal hash rate = 14000
hash rate is low...
re_open_core_times: 1
re_open_core enter
Before read Chain[J6] org chain_voltage_pic=125]
After read Chain[J6] new chain_voltage_pic=125 read pic=125
Before read Chain[J7] org chain_voltage_pic=125]
After read Chain[J7] new chain_voltage_pic=125 read pic=125
Before read Chain[J8] org chain_voltage_pic=125]
After read Chain[J8] new chain_voltage_pic=125 read pic=125
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[10] has core num=4
Chain[J6] ASIC[22] has core num=15
Chain[J6] ASIC[33] has core num=1
Chain[J6] ASIC[45] has core num=14
Chain[J6] ASIC[47] has core num=15
Chain[J6] ASIC[52] has core num=15
Chain[J6] ASIC[55] has core num=3
Chain[J7] has core num in PIC
Chain[J8] has core num in PIC
Chain[J8] ASIC[15] has core num=15
miner total rate=14001GH/s ideal_total_hash_rate = 14000GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=687
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687
Asic[40]:687 Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687
Asic[48]:687 Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687
Asic[56]:687 Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687
Chain:5 max freq=687
Chain:5 min freq=681

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=662
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650
Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650
Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650
Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650
Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650
Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650
Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:656 Asic[62]:656
Chain:6 max freq=656
Chain:6 min freq=650

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=662
Asic[ 0]:656 Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:656 Asic[ 5]:656 Asic[ 6]:656 Asic[ 7]:656
Asic[ 8]:656 Asic[ 9]:656 Asic[10]:656 Asic[11]:656 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662
Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662
Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662
Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662
Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662
Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662
Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:7 max freq=662
Chain:7 min freq=656


Miner fix freq ...
totalRate = 14001, fixed_totalRate = 14140
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=687
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687
Asic[40]:687 Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687
Asic[48]:687 Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687
Asic[56]:687 Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687
Chain:5 max freq=687
Chain:5 min freq=681

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=662
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650
Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650
Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650
Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650
Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650
Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650
Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:656 Asic[62]:656
Chain:6 max freq=656
Chain:6 min freq=650

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=662
Asic[ 0]:656 Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:656 Asic[ 5]:656 Asic[ 6]:656 Asic[ 7]:656
Asic[ 8]:656 Asic[ 9]:656 Asic[10]:656 Asic[11]:656 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662
Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662
Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662
Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662
Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662
Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662
Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:7 max freq=662
Chain:7 min freq=656

max freq = 687
totalRate = 14001, fixed_totalRate = 14000
set baud=1
Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:60 remote:64 offset:29
Chain[J6] chip[244] get middle temp offset=29 typeID=55
Chain[J7] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:55 remote:58 offset:30
Chain[J7] chip[244] get middle temp offset=30 typeID=55
Chain[J8] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[8] temp chip I2C addr=0x98
chain[8] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[8] chip[244] local:53 remote:57 offset:29
Chain[J8] chip[244] get middle temp offset=29 typeID=55
setting to working voltage...
chain[5] set voltage to 930
chain[6] set voltage to 930
chain[7] set voltage to 930
chain[5] set voltage to 920
chain[6] set voltage to 920
chain[7] set voltage to 920
chain[5] set voltage to 910
chain[6] set voltage to 910
chain[7] set voltage to 910
chain[5] set voltage to 900
chain[6] set voltage to 900
chain[7] set voltage to 900
chain[5] set voltage to 890
chain[6] set voltage to 890
chain[7] set voltage to 890
chain[5] set voltage to 880
chain[6] set voltage to 880
chain[7] set voltage to 880
chain[5] set voltage to 870
chain[6] set voltage to 870
chain[7] set voltage to 870
reopen core end
re_open_core_times: 2
re_open_core enter
Before read Chain[J6] org chain_voltage_pic=125]
After read Chain[J6] new chain_voltage_pic=125 read pic=125
Before read Chain[J7] org chain_voltage_pic=125]
After read Chain[J7] new chain_voltage_pic=125 read pic=125
Before read Chain[J8] org chain_voltage_pic=125]
After read Chain[J8] new chain_voltage_pic=125 read pic=125
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[10] has core num=4
Chain[J6] ASIC[22] has core num=15
Chain[J6] ASIC[33] has core num=1
Chain[J6] ASIC[45] has core num=14
Chain[J6] ASIC[47] has core num=15
Chain[J6] ASIC[52] has core num=15
Chain[J6] ASIC[55] has core num=3
Chain[J7] has core num in PIC
Chain[J8] has core num in PIC
Chain[J8] ASIC[15] has core num=15
miner total rate=14001GH/s ideal_total_hash_rate = 14000GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=687
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687
Asic[40]:687 Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687
Asic[48]:687 Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687
Asic[56]:687 Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687
Chain:5 max freq=687
Chain:5 min freq=681

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=662
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650
Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650
Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650
Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650
Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650
Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650
Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:656 Asic[62]:656
Chain:6 max freq=656
Chain:6 min freq=650

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=662
Asic[ 0]:656 Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:656 Asic[ 5]:656 Asic[ 6]:656 Asic[ 7]:656
Asic[ 8]:656 Asic[ 9]:656 Asic[10]:656 Asic[11]:656 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662
Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662
Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662
Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662
Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662
Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662
Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:7 max freq=662
Chain:7 min freq=656


Miner fix freq ...
totalRate = 14001, fixed_totalRate = 14140
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=687
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687
Asic[40]:687 Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687
Asic[48]:687 Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687
Asic[56]:687 Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687
Chain:5 max freq=687
Chain:5 min freq=681

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=662
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650
Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650
Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650
Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650
Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650
Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650
Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:656 Asic[62]:656
Chain:6 max freq=656
Chain:6 min freq=650

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=662
Asic[ 0]:656 Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:656 Asic[ 5]:656 Asic[ 6]:656 Asic[ 7]:656
Asic[ 8]:656 Asic[ 9]:656 Asic[10]:656 Asic[11]:656 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662
Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662
Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662
Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662
Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662
Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662
Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:7 max freq=662
Chain:7 min freq=656

max freq = 687
totalRate = 14001, fixed_totalRate = 14000
set baud=1
Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
Warning: Chain[5] chip[244] local:59 remote:-64 offset:-100, will fixed offset=27
New offset Chain[6] chip[244] local:59 remote:-64 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=55
Chain[J7] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:54 remote:56 offset:31
Chain[J7] chip[244] get middle temp offset=31 typeID=55
Chain[J8] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[8] temp chip I2C addr=0x98
chain[8] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[8] chip[244] local:52 remote:56 offset:28
Chain[J8] chip[244] get middle temp offset=28 typeID=55
setting to working voltage...
chain[5] set voltage to 930
chain[6] set voltage to 930
chain[7] set voltage to 930
chain[5] set voltage to 920
chain[6] set voltage to 920
chain[7] set voltage to 920
chain[5] set voltage to 910
chain[6] set voltage to 910
chain[7] set voltage to 910
chain[5] set voltage to 900
chain[6] set voltage to 900
chain[7] set voltage to 900
chain[5] set voltage to 890
chain[6] set voltage to 890
chain[7] set voltage to 890
chain[5] set voltage to 880
chain[6] set voltage to 880
chain[7] set voltage to 880
chain[5] set voltage to 870
chain[6] set voltage to 870
chain[7] set voltage to 870
reopen core end
avg_rate = 12577, ideal_total_hash_rate = 14000
re_open_core_times: 3
re_open_core enter
Before read Chain[J6] org chain_voltage_pic=125]
After read Chain[J6] new chain_voltage_pic=125 read pic=125
Before read Chain[J7] org chain_voltage_pic=125]
After read Chain[J7] new chain_voltage_pic=125 read pic=125
Before read Chain[J8] org chain_voltage_pic=125]
After read Chain[J8] new chain_voltage_pic=125 read pic=125
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[10] has core num=4
Chain[J6] ASIC[22] has core num=15
Chain[J6] ASIC[33] has core num=1
Chain[J6] ASIC[45] has core num=14
Chain[J6] ASIC[47] has core num=15
Chain[J6] ASIC[52] has core num=15
Chain[J6] ASIC[55] has core num=3
Chain[J7] has core num in PIC
Chain[J8] has core num in PIC
Chain[J8] ASIC[15] has core num=15
miner total rate=14001GH/s ideal_total_hash_rate = 14000GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=687
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687
Asic[40]:687 Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687
Asic[48]:687 Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687
Asic[56]:687 Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687
Chain:5 max freq=687
Chain:5 min freq=681

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=662
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650
Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650
Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650
Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650
Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650
Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650
Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:656 Asic[62]:656
Chain:6 max freq=656
Chain:6 min freq=650

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=662
Asic[ 0]:656 Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:656 Asic[ 5]:656 Asic[ 6]:656 Asic[ 7]:656
Asic[ 8]:656 Asic[ 9]:656 Asic[10]:656 Asic[11]:656 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662
Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662
Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662
Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662
Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662
Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662
Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:7 max freq=662
Chain:7 min freq=656


Miner fix freq ...
totalRate = 14001, fixed_totalRate = 14140
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=687
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687
Asic[40]:687 Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687
Asic[48]:687 Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687
Asic[56]:687 Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687
Chain:5 max freq=687
Chain:5 min freq=681

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=662
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650
Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650
Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650
Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650
Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650
Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650
Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:656 Asic[62]:656
Chain:6 max freq=656
Chain:6 min freq=650

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=662
Asic[ 0]:656 Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:656 Asic[ 5]:656 Asic[ 6]:656 Asic[ 7]:656
Asic[ 8]:656 Asic[ 9]:656 Asic[10]:656 Asic[11]:656 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662
Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662
Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662
Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662
Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662
Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662
Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:7 max freq=662
Chain:7 min freq=656

max freq = 687
totalRate = 14001, fixed_totalRate = 14000
set baud=1
Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:58 remote:62 offset:29
Chain[J6] chip[244] get middle temp offset=29 typeID=55
Chain[J7] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:53 remote:56 offset:30
Chain[J7] chip[244] get middle temp offset=30 typeID=55
Chain[J8] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[8] temp chip I2C addr=0x98
chain[8] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[8] chip[244] local:51 remote:55 offset:28
Chain[J8] chip[244] get middle temp offset=28 typeID=55
setting to working voltage...
chain[5] set voltage to 930
chain[6] set voltage to 930
chain[7] set voltage to 930
chain[5] set voltage to 920
chain[6] set voltage to 920
chain[7] set voltage to 920
chain[5] set voltage to 910
chain[6] set voltage to 910
chain[7] set voltage to 910
chain[5] set voltage to 900
chain[6] set voltage to 900
chain[7] set voltage to 900
chain[5] set voltage to 890
chain[6] set voltage to 890
chain[7] set voltage to 890
chain[5] set voltage to 880
chain[6] set voltage to 880
chain[7] set voltage to 880
do read_temp_func once...

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000
Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=368.259 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000
Asic[33]=0.00000 Asic[34]=0.00000 Asic[35]=0.00000 Asic[36]=0.00000 Asic[37]=0.00000 Asic[38]=0.00000 Asic[39]=0.00000 Asic[40]=0.00000
Asic[41]=0.00000 Asic[42]=0.00000 Asic[43]=0.00000 Asic[44]=0.00000 Asic[45]=0.00000 Asic[46]=0.00000 Asic[47]=0.00000 Asic[48]=0.00000
Asic[49]=0.00000 Asic[50]=0.00000 Asic[51]=0.00000 Asic[52]=0.00000 Asic[53]=0.00000 Asic[54]=0.00000 Asic[55]=0.00000 Asic[56]=0.00000
Asic[57]=348.345 Asic[58]=0.00000 Asic[59]=0.00000 Asic[60]=0.00000 Asic[61]=0.00000 Asic[62]=0.00000 Asic[63]=0.00000

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=42.1440 Asic[02]=50.4650 Asic[03]=52.8810 Asic[04]=76.5040 Asic[05]=71.9400 Asic[06]=28.9910 Asic[07]=50.7340 Asic[08]=48.8550
Asic[09]=63.8870 Asic[10]=77.3090 Asic[11]=60.3970 Asic[12]=56.3710 Asic[13]=55.8340 Asic[14]=72.7460 Asic[15]=56.1030 Asic[16]=61.4710
Asic[17]=67.1080 Asic[18]=53.1500 Asic[19]=61.7400 Asic[20]=74.0880 Asic[21]=67.6450 Asic[22]=52.0760 Asic[23]=52.6130 Asic[24]=39.1910
Asic[25]=52.0760 Asic[26]=50.1970 Asic[27]=31.4060 Asic[28]=78.3830 Asic[29]=354.401 Asic[30]=58.2500 Asic[31]=27.3800 Asic[32]=56.3710
Asic[33]=74.3560 Asic[34]=81.6040 Asic[35]=26.3060 Asic[36]=39.9960 Asic[37]=52.6130 Asic[38]=69.5240 Asic[39]=36.2380 Asic[40]=36.5070
Asic[41]=47.2440 Asic[42]=45.6340 Asic[43]=75.1610 Asic[44]=39.1910 Asic[45]=81.3350 Asic[46]=65.7660 Asic[47]=44.8280 Asic[48]=29.7960
Asic[49]=65.2290 Asic[50]=53.4180 Asic[51]=47.2440 Asic[52]=53.9550 Asic[53]=44.8280 Asic[54]=41.0700 Asic[55]=65.4980 Asic[56]=62.5450
Asic[57]=333.346 Asic[58]=57.1760 Asic[59]=51.2710 Asic[60]=24.9640 Asic[61]=73.5510 Asic[62]=52.8810 Asic[63]=46.1700

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=45.5500 Asic[02]=71.9400 Asic[03]=73.7520 Asic[04]=59.2570 Asic[05]=45.5330 Asic[06]=36.5570 Asic[07]=55.7330 Asic[08]=57.0250
Asic[09]=39.5940 Asic[10]=62.4610 Asic[11]=33.1350 Asic[12]=65.2460 Asic[13]=50.7670 Asic[14]=57.6630 Asic[15]=54.6930 Asic[16]=51.0860
Asic[17]=40.0470 Asic[18]=31.2390 Asic[19]=50.1470 Asic[20]=31.3060 Asic[21]=31.2550 Asic[22]=59.1730 Asic[23]=55.1290 Asic[24]=49.2570
Asic[25]=51.6730 Asic[26]=34.7950 Asic[27]=49.5930 Asic[28]=43.9730 Asic[29]=357.589 Asic[30]=70.2120 Asic[31]=40.3650 Asic[32]=49.5930
Asic[33]=66.4040 Asic[34]=43.5530 Asic[35]=56.6730 Asic[36]=22.9170 Asic[37]=42.5470 Asic[38]=52.6130 Asic[39]=46.3890 Asic[40]=55.7170
Asic[41]=87.0730 Asic[42]=39.3250 Asic[43]=59.8440 Asic[44]=61.2360 Asic[45]=68.3500 Asic[46]=43.0160 Asic[47]=63.9040 Asic[48]=50.0960
Asic[49]=48.7040 Asic[50]=42.2780 Asic[51]=62.8130 Asic[52]=59.5420 Asic[53]=37.3960 Asic[54]=61.2360 Asic[55]=47.1770 Asic[56]=72.3760
Asic[57]=338.983 Asic[58]=82.7450 Asic[59]=46.2210 Asic[60]=39.4260 Asic[61]=32.0610 Asic[62]=45.5830 Asic[63]=61.6560
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Asic[29]=368.259000
Asic[57]=348.345000
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Asic[29]=354.401000
Asic[57]=333.346000
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Asic[29]=357.589000
Asic[57]=338.983000
Done check_asic_reg
Chain[5] Chip[244] pcb temperature=61
Chain[5] Chip[62] junction temperature=77
Special fix Chain[5] Chip[62] middle Temp = 76
Done read temp on Chain[5]
read failed on Chain[6] Chip[62] middle Temp old value:0
Special fix Chain[6] Chip[62] middle Temp = 15
Done read temp on Chain[6]
Chain[7] Chip[244] pcb temperature=58
Chain[7] Chip[62] junction temperature=69
Special fix Chain[7] Chip[62] middle Temp = 73
Done read temp on Chain[7]
Max pcb temp : 61
Read temp failed, set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=11219
Jump to: