Topic: [Open Testing]Avalon3 improved firmware. frequency and voltage auto match. (Read 4434 times)

Could you provide a d/l of just the scripts that isn't in Chinese?

I've done similar to the S1's I have.

8 )

Not supported or condoned by either the cgminer development team or the avalon team and posted by a very new member. I suggest caution to anyone before downloading these.

New Cgminer Configure page
http://imgsrc.baidu.com/forum/w%3D580%3B/sign=2cac4849c9ef76093c0b99971ee6a2cc/e1fe9925bc315c6014f0273b8fb1cb13485477f8.jpg

Configure the time zone of your country
http://imgsrc.baidu.com/forum/w%3D580/sign=31fdc3f6cafcc3ceb4c0c93ba247d6b7/3db060f082025aafd2e2311ff9edab64014f1ab1.jpg

Flash method is the same as before:

The pictures original URL: http://tieba.baidu.com/p/3127662851

The original topic URL: https://bitcointalksearch.org/topic/avalon23-663045

============================================================================
avalon2   200G firmware downloading(The usage method is in the “Brief Introduction” section)
The New Features：
1. Configure different chip frequency in different time quota. The chip frequency will switch automatically when the last time quota is up.
2. Fix NTP communication failing bug and so on.

Dowload_Link 1
http://www.400gb.com/file/67378372
Dowload_Link1 2
http://pan.baidu.com/s/1bnxnsGR
Dowload_Link1 3
http://115.com/lb/5lbaxtdvunyb
============================================================================
avalon2.5   105G/300G firmware downloading(The usage method is in the “Brief Introduction” section)
The New Features：
1. Add the feature that chip frequency and chip voltage auto match each other，which will save power and optimize the power efficiency.
2. Configure different chip frequency in different time quota. The chip frequency will switch automatically when the last time quota is up.

Dowload_Link 1
http://www.400gb.com/file/68129034
Dowload_Link 2
http://pan.baidu.com/s/1kTC6pM3
Dowload_Link 3
http://115.com/lb/5lbcyfur3jvv
============================================================================
avalon3   290G/800G firmware downloading(The usage method is in the “Brief Introduction” section)
The New Features：
1. Add the feature that chip frequency and chip voltage auto match each other，which will save power and optimize the power efficiency.
2. Configure different chip frequency in different time quota. The chip frequency will switch automatically when the last time quota is up.

Dowload_Link 1
http://www.400gb.com/file/68129038
Dowload_Link 2
http://pan.baidu.com/s/1jGEAowI
Dowload_Link 3
http://115.com/lb/5lbbtu88hltm
============================================================================



Brief Introduction
1. Add 24hour time quantum control feature. The program can auto set the frequency at different time quantum. In the noon, the ambient temprature is high, so ASIC should run at a low speed for less heat generating. On the contrary, the Asic may run at a high speed in the evening.
        Usage Method：
      a. In the system label page，configure the time zone of your country
        b. In the Cgminer Configuration page, 24hour Time-zone Control configuration section, configure the start time, end time and the corresponding chip requency.
      c. If you want to enable the Time-Zone configuration, remember checking the check-box.

2. For Avalon2.5 and avalon3, add the feature that Chip Freqency and Chip Voltage auto match each other. When fix the frequency, the firmware will auto tuning the chip voltage to the lowest value which the chip can work well with. When fix the voltage, the firmware will auto tuning the chip frequency to the highest value which the chip can work well on.
        Usage Method：
      a. Method-1： In the “Cgminer Configuration” page，set the freqency you want in the “Chip Frequency” text box，and set 0 (zero) in the “Chip Voltage" text box. And then, on the premise of machine running normally, the firmware will set the chip voltage as low as it can.
      b. Method-2： In the “Cgminer Configuration” page，set the voltage you want in the “Chip Voltage” text box，and  set 0 (zero) in the “Chip Frequency” text box. And then, on the premise of machine running normally, the firmware will set the chip frequency as high as it can.
      c. Method-3： Set the tow value "Chip Voltage" and "Chip Frequency” simultaneously. This is the old method which will not save power.
     Note: The feature-1 and feature-2 can be used at the same time.

3. Fix the bug that NTPD sync failed cause the system halt and waiting.

4. Fix the bug that system can't run when you set a unsuited frequncy. Now you can set any freqency between 256 - 2000, and the program will tune it.