I have two identical 6 x Zotac 1070 Mini rigs -- exactly the same config.
Upgraded now to nvoc v15 and works nicely on MSI Z270-A-PRO motherboard, i3-7100 CPU and 4GB RAM, 32GB USB3 Sandisk Cruzer Glide
Mining ZEC at Nicehash at 440-ish sols per card.
+200/+1100/165 PL
1100watts from the wall
The issue is not an issue but a strange observation....
The network port of the mobo on the 1st rig is amber/green... which is normal for a gigabit connection.
However the 2nd rig, is amber/amber.... which I think is 100base instead on gigabit/1000base
Both rigs do hash well, ranges from 2400-2800sols, nothing strange I think.
Anyone encountered a similar case?
Anybody tried to convert a similar rig like this for ETH mining? Any good?
Topic: [OS] nvOC easy-to-use Linux Nvidia Mining - page 391. (Read 418253 times)
Hi! First of all, that's so much for making this. It's been super easy to use and (as far as I know) is reporting the highest hashrate for me so far!
I have an ASUS Prime Z270-A with 4 EVGA 1070 SC2 cards. I've had trouble trying to OC them (have seen maybe you can't because they're factory OC'd?) and oneBash spits out errors trying to assign GPUTargetFanSpeed when it starts up. Maybe you know how to get around this?
Thanks so much!
Do you use a fast USB stick, as recommended? Setting power limit can cause some problems on slow ones. What is the trouble you're getting with OC? What are the values used? I have an ASUS Prime Z270-A with 4 EVGA 1070 SC2 cards. I've had trouble trying to OC them (have seen maybe you can't because they're factory OC'd?) and oneBash spits out errors trying to assign GPUTargetFanSpeed when it starts up. Maybe you know how to get around this?
Thanks so much!
switched to ssh because I wanted to a quick way to edit the onebash file and test the rig on various clocks.
I am used to the nano editor so...
root@m1-desktop:/home/m1# nano /media/m1/1263-A96E/oneBash
do the changes
root@m1-desktop:/home/m1# sudo reboot
after reboot, ssh into again
how do I get the mining console?
root@m1-desktop:/home/m1# screen -x m1
doesn't get me anything
Have had the same problem, couldn't get it to work by default.I am used to the nano editor so...
root@m1-desktop:/home/m1# nano /media/m1/1263-A96E/oneBash
do the changes
root@m1-desktop:/home/m1# sudo reboot
after reboot, ssh into again
how do I get the mining console?
root@m1-desktop:/home/m1# screen -x m1
doesn't get me anything
The 2unix is made autostart, and can't be reached with screen or tmux because of it probably.
Have had to change things to oneBash, but because of that an auto restart of oneBash is not possible anymore. At least I wasn't able to get it done..
Hi! First of all, that's so much for making this. It's been super easy to use and (as far as I know) is reporting the highest hashrate for me so far!
I have an ASUS Prime Z270-A with 4 EVGA 1070 SC2 cards. I've had trouble trying to OC them (have seen maybe you can't because they're factory OC'd?) and oneBash spits out errors trying to assign GPUTargetFanSpeed when it starts up. Maybe you know how to get around this?
Thanks so much!
I have an ASUS Prime Z270-A with 4 EVGA 1070 SC2 cards. I've had trouble trying to OC them (have seen maybe you can't because they're factory OC'd?) and oneBash spits out errors trying to assign GPUTargetFanSpeed when it starts up. Maybe you know how to get around this?
Thanks so much!
switched to ssh because I wanted to a quick way to edit the onebash file and test the rig on various clocks.
I am used to the nano editor so...
root@m1-desktop:/home/m1# nano /media/m1/1263-A96E/oneBash
do the changes
root@m1-desktop:/home/m1# sudo reboot
after reboot, ssh into again
how do I get the mining console?
root@m1-desktop:/home/m1# screen -x m1
doesn't get me anything
I am used to the nano editor so...
root@m1-desktop:/home/m1# nano /media/m1/1263-A96E/oneBash
do the changes
root@m1-desktop:/home/m1# sudo reboot
after reboot, ssh into again
how do I get the mining console?
root@m1-desktop:/home/m1# screen -x m1
doesn't get me anything
switched from Teamviewer to ssh...
removed the # from file as per onebash instructions
upon ssh to rig IP
user: root
password: miner1
Error message: Access denied
Anybody can help?
removed the # from file as per onebash instructions
upon ssh to rig IP
user: root
password: miner1
Error message: Access denied
Anybody can help?
try as the user:
m1
that works thanks!
from where do I find / how edit to the onebash file?
it is located at:
Code:
'/media/m1/1263-A96E/oneBash'
You probably already know this but I'm sure a lot of members don't :
IMO when navigating by the cmd line the easiest way to is use a few shortcuts
first see what is in the current directory (also called a folder) with:
Code:
ls
this will show you what is there
start typing the desired sub directory or file then press the tab key
as soon as what you have started typing is distinguishable; the tab will finish for you
to move up a directory (to the parent directory) use
Code:
cd ..
the three of these should allow very quick cmd line navigation once you get used to using them.
the last shortcut that is really helpful is to press the up key (single or multiple times) to scroll through previously entered cmds.
Code:
sudo apt install mc
after that you can start it with:
Code:
mc
What happens if you disable the onboard graphics?
That did the trick in combination with gen2 in BIOS for a PCI-E slot.
Managed to get it working on one rig but can't get it on other four. The four rigs after adding sixth card start booting without error but getting no output on any of the GPUs. All rigs are set to start mining on boot, so it must be that the process has stopped somewhere after booting as there is no debug code on the LED display. Going to try with SSH but need to punch some holes in switch first.
I'll keep 'playing' with this and write here if I find a solution.
Now I at least know there is a way. :-)
Thanks man!
Edit:
Thanks for the information and images of the mobo, tried changing to Gen2 earlier before but it doesn't seem to work always like it should ^ ( see text above ). Change to Gen2 only worked on one rig out of five and my mobo doesn't have "DMI Gen Speed" or similar. I'll keep playing with this and write back if I manage something.
Also just to let you know, I have the same problem as post #502 running with 5x 1060.
This looks nice so far .
I have a GTX 1070 Gaming X with Micron memory. Anybody knows how much I can push these in Linux ?
In windows I can get them between 30-31 but only if Claymore is already running . If i want to start it with mem oc +600 it crashes
On nvOC is see that my Mh/s is lower it I oc mem to +600. I get around 28mh ... lower then for same settings in Win . Am I doing something wrong ?
Thanks !
I have a GTX 1070 Gaming X with Micron memory. Anybody knows how much I can push these in Linux ?
In windows I can get them between 30-31 but only if Claymore is already running . If i want to start it with mem oc +600 it crashes
On nvOC is see that my Mh/s is lower it I oc mem to +600. I get around 28mh ... lower then for same settings in Win . Am I doing something wrong ?
Thanks !
I don't have a Gaming X 1070; but some 1070s will OC stability up to 1100. I have noticed that the OC offsets don't have the same results in linux as in windows; you should have to OC a little higher in linux to have the same result. However you should also be able to OC higher in linux for this same reason.
When using Ethash, setting the mc OC too high will most likely result in a Claymore soft crash. Setting the cc OC too high will most likely crash the system. I would keep bumping up the mc OC by 100 until you get a Claymore soft crash. Then reduce it by 50, and see if it is ok. If not down another 50.
I tried ETH with a 6x zotac 1070 mini rig; for short term at least this was the highest stable setting: cc+200, mc+1100, powerlimit 125 (because more power did not generate more hash).
I noticed too that CC does very little with other hash on Eth, while memory does a lot more.
Also are you mining ZEC right now instead? Do you have some numbers on your 1070's? I was averaging around 440sol/s each.
ETH uses Ethash which is a memory intensive algorithm. ZEC uses Equihash which is a core intensive algorithm.
With ZEC using more power will get you more hash. Going up to powerlimit 165 should give you 465-470 sol/s with cc+200, mc+900 (or higher)
I usually get around 445 sol/s with cc+200, mc+1100, powerlimit 135
switched from Teamviewer to ssh...
removed the # from file as per onebash instructions
upon ssh to rig IP
user: root
password: miner1
Error message: Access denied
Anybody can help?
removed the # from file as per onebash instructions
upon ssh to rig IP
user: root
password: miner1
Error message: Access denied
Anybody can help?
try as the user:
m1
that works thanks!
from where do I find / how edit to the onebash file?
it is located at:
Code:
'/media/m1/1263-A96E/oneBash'
You probably already know this but I'm sure a lot of members don't :
IMO when navigating by the cmd line the easiest way to is use a few shortcuts
first see what is in the current directory (also called a folder) with:
Code:
ls
this will show you what is there
start typing the desired sub directory or file then press the tab key
as soon as what you have started typing is distinguishable; the tab will finish for you
to move up a directory (to the parent directory) use
Code:
cd ..
the three of these should allow very quick cmd line navigation once you get used to using them.
the last shortcut that is really helpful is to press the up key (single or multiple times) to scroll through previously entered cmds.
This looks nice so far .
I have a GTX 1070 Gaming X with Micron memory. Anybody knows how much I can push these in Linux ?
In windows I can get them between 30-31 but only if Claymore is already running . If i want to start it with mem oc +600 it crashes
On nvOC is see that my Mh/s is lower it I oc mem to +600. I get around 28mh ... lower then for same settings in Win . Am I doing something wrong ?
Thanks !
I have a GTX 1070 Gaming X with Micron memory. Anybody knows how much I can push these in Linux ?
In windows I can get them between 30-31 but only if Claymore is already running . If i want to start it with mem oc +600 it crashes
On nvOC is see that my Mh/s is lower it I oc mem to +600. I get around 28mh ... lower then for same settings in Win . Am I doing something wrong ?
Thanks !
I don't have a Gaming X 1070; but some 1070s will OC stability up to 1100. I have noticed that the OC offsets don't have the same results in linux as in windows; you should have to OC a little higher in linux to have the same result. However you should also be able to OC higher in linux for this same reason.
When using Ethash, setting the mc OC too high will most likely result in a Claymore soft crash. Setting the cc OC too high will most likely crash the system. I would keep bumping up the mc OC by 100 until you get a Claymore soft crash. Then reduce it by 50, and see if it is ok. If not down another 50.
I tried ETH with a 6x zotac 1070 mini rig; for short term at least this was the highest stable setting: cc+200, mc+1100, powerlimit 125 (because more power did not generate more hash).
I noticed too that CC does very little with other hash on Eth, while memory does a lot more.
Also are you mining ZEC right now instead? Do you have some numbers on your 1070's? I was averaging around 440sol/s each.
switched from Teamviewer to ssh...
removed the # from file as per onebash instructions
upon ssh to rig IP
user: root
password: miner1
Error message: Access denied
Anybody can help?
removed the # from file as per onebash instructions
upon ssh to rig IP
user: root
password: miner1
Error message: Access denied
Anybody can help?
try as the user:
m1
that works thanks!
from where do I find / how edit to the onebash file?
This looks nice so far .
I have a GTX 1070 Gaming X with Micron memory. Anybody knows how much I can push these in Linux ?
In windows I can get them between 30-31 but only if Claymore is already running . If i want to start it with mem oc +600 it crashes
On nvOC is see that my Mh/s is lower it I oc mem to +600. I get around 28mh ... lower then for same settings in Win . Am I doing something wrong ?
Thanks !
I have a GTX 1070 Gaming X with Micron memory. Anybody knows how much I can push these in Linux ?
In windows I can get them between 30-31 but only if Claymore is already running . If i want to start it with mem oc +600 it crashes
On nvOC is see that my Mh/s is lower it I oc mem to +600. I get around 28mh ... lower then for same settings in Win . Am I doing something wrong ?
Thanks !
I don't have a Gaming X 1070; but some 1070s will OC stability up to 1100. I have noticed that the OC offsets don't have the same results in linux as in windows; you should have to OC a little higher in linux to have the same result. However you should also be able to OC higher in linux for this same reason.
When using Ethash, setting the mc OC too high will most likely result in a Claymore soft crash. Setting the cc OC too high will most likely crash the system. I would keep bumping up the mc OC by 100 until you get a Claymore soft crash. Then reduce it by 50, and see if it is ok. If not down another 50.
I tried ETH with a 6x zotac 1070 mini rig; for short term at least this was the highest stable setting: cc+200, mc+1100, powerlimit 125 (because more power did not generate more hash).
I don't have that specific motherboard; but I have other z97 mobos with similar 6 GPU difficulties. I will get one out and see if I can find the problem tonight.
To help me find the problem:
press f12 to open the guake terminal
If cpuminer-opt is running rightclick over the guake terminal and select new tab or press ctrl + c to stop it.
then enter:
lspci | grep VGA
please tell me what this outputs
To help me find the problem:
press f12 to open the guake terminal
If cpuminer-opt is running rightclick over the guake terminal and select new tab or press ctrl + c to stop it.
then enter:
lspci | grep VGA
please tell me what this outputs
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1c02 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1c02 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1c02 (rev a1)
07:00.0 VGA compatible controller: NVIDIA Corporation Device 1c02 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1c02 (rev a1)
lspci doesn't see the GPU because the riser wasn't plugged in on boot. If it was plugged on power up and boot, would get error 55 and the system wouldn't even boot neither would get any video or interaction, hard reset is the only option there. The problem is not in the riser or GPU or slot because this is happening on all 5 rigs (z97x and 1060), replacing risers, GPU or power cables doesn't help.
I'll try now to leave it past the bios and then plug in the sixth riser on GRUB choose.
What happens if you disable the onboard graphics?
So I just got my 1st z97 mobo to work with 6x GPUs; it is not the same model as yours; but yours might have a similar setting that needs to be changed.
I had to change the setting called: DMI Gen2 Speed from Disabled:
to Auto
in order to get the sixth card to work properly.
I have 1 more z97 mobo; I'll try it as well.
This looks nice so far .
I have a GTX 1070 Gaming X with Micron memory. Anybody knows how much I can push these in Linux ?
In windows I can get them between 30-31 but only if Claymore is already running . If i want to start it with mem oc +600 it crashes
On nvOC is see that my Mh/s is lower it I oc mem to +600. I get around 28mh ... lower then for same settings in Win . Am I doing something wrong ?
Thanks !
I have a GTX 1070 Gaming X with Micron memory. Anybody knows how much I can push these in Linux ?
In windows I can get them between 30-31 but only if Claymore is already running . If i want to start it with mem oc +600 it crashes
On nvOC is see that my Mh/s is lower it I oc mem to +600. I get around 28mh ... lower then for same settings in Win . Am I doing something wrong ?
Thanks !
I don't have a Gaming X 1070; but some 1070s will OC stability up to 1100. I have noticed that the OC offsets don't have the same results in linux as in windows; you should have to OC a little higher in linux to have the same result. However you should also be able to OC higher in linux for this same reason.
When using Ethash, setting the mc OC too high will most likely result in a Claymore soft crash. Setting the cc OC too high will most likely crash the system. I would keep bumping up the mc OC by 100 until you get a Claymore soft crash. Then reduce it by 50, and see if it is ok. If not down another 50.
nvOS v0015
matherbord: "ASUS H87M-e" AND "asus h61m-k"
video: asus 1050 ti 4gb OC
what can be done?
Are you using 1x GPU?
If so see:
https://bitcointalksearch.org/topic/m.19449945
Let me know if you are using more than one GPU; or if you are using one GPU and that fix isn't working.
This looks nice so far .
I have a GTX 1070 Gaming X with Micron memory. Anybody knows how much I can push these in Linux ?
In windows I can get them between 30-31 but only if Claymore is already running . If i want to start it with mem oc +600 it crashes
On nvOC is see that my Mh/s is lower it I oc mem to +600. I get around 28mh ... lower then for same settings in Win . Am I doing something wrong ?
Thanks !
I have a GTX 1070 Gaming X with Micron memory. Anybody knows how much I can push these in Linux ?
In windows I can get them between 30-31 but only if Claymore is already running . If i want to start it with mem oc +600 it crashes
On nvOC is see that my Mh/s is lower it I oc mem to +600. I get around 28mh ... lower then for same settings in Win . Am I doing something wrong ?
Thanks !
https://timur.pw/storage/0.jpg
nvOS v0015
matherbord: "ASUS H87M-e" AND "asus h61m-k"
video: asus 1050 ti 4gb OC
https://timur.pw/storage/1.jpg
what can be done?
Does nvOC have any way to do automatic coin/algo/profit switching?
Not right now.
I will add this to the list.
Also when the nicehash linux Excavator client is done it should have this capability as well (I will add the Excavator client when it is released).
Although if I make a profit switching algorithm; it would most likely have different target parameters and coin switching conditions than those you are used to.
Does nvOC have any way to do automatic coin/algo/profit switching?
Can I run some sort of update from withing the nvOS, or do I have to download a new version manually and make a new stick with it? Just thinking how would I go around managing updates for couple of rigs running nvOS...
I am working on the solution.
perfect
Jump to: