[OS] nvOC easy-to-use Linux Nvidia Mining - page 401.

bobers

member

Activity: 73

Merit: 10

Quote from: fullzero on June 02, 2017, 10:05:02 AM

Quote from: bobers on June 02, 2017, 08:56:10 AM

I have some olds motherbords with no name USB flashes and nvOS works well after i modifed xorg. Now i bought 2 MSI270 A Pro, load image for it on Lexar 32gb. I dont know why but nvOS loading very slowly, im waiting about 30 min with black screen on both MB.
What do i do wrong? I flashed new BIOS and setup it like fullzero said. Also i have 6 Gigabyte min 1070 with USB power risers rev 006c each one connected to each one sata.

My old MB with 2gb RAM loads within 5-10 min, new both MSI with 8GB DDR4 about 30 min

It should not be taking 30 mins to load. First what CPU are you using?

I recommend using this USB port.

Are you connecting the monitor to the gpu attached to the first 16x slot as pictured here?

I use G4600, of cause i connect monitor to 1st slot. I tried different USB ports, this one also

fullzero

legendary

Activity: 1260

Merit: 1009

Quote from: bobers on June 02, 2017, 08:56:10 AM

I have some olds motherbords with no name USB flashes and nvOS works well after i modifed xorg. Now i bought 2 MSI270 A Pro, load image for it on Lexar 32gb. I dont know why but nvOS loading very slowly, im waiting about 30 min with black screen on both MB.
What do i do wrong? I flashed new BIOS and setup it like fullzero said. Also i have 6 Gigabyte min 1070 with USB power risers rev 006c each one connected to each one sata.

My old MB with 2gb RAM loads within 5-10 min, new both MSI with 8GB DDR4 about 30 min

It should not be taking 30 mins to load. First what CPU are you using?

I recommend using this USB port.

Are you connecting the monitor to the gpu attached to the first 16x slot as pictured here?

fullzero

legendary

Activity: 1260

Merit: 1009

Quote from: rabbitr32 on June 02, 2017, 08:14:15 AM

Quote from: fullzero on June 02, 2017, 01:07:01 AM

I added a fully compatible nvOC image for the ASUS Z270-F GAMING Motherboard

The SHA256 hash (for the zip) is:

Quote

7abd76fc656f9605086535dc71215437288689e644f72e3fe1ba54d3f9f87f4d

ASUS Z270-F GAMING up to 9x cards with 2x m2_to_pcie_adapters (note all OC) Link Grin

nvOC is for fast 16gb or larger USB keys see the OP for a link

This image includes plusCPU setting to enable cpuminer-opt to mine XMR while mining another COIN with the GPUs.

This image has the newest oneBash supporting these COIN selections:

ZEC ZCL FTC LBC MUSIC ETC EXP ETH DCR PASC
DUAL_ETC_DCR DUAL_ETC_PASC DUAL_ETC_LBC DUAL_ETC_SC
DUAL_EXP_DCR DUAL_EXP_PASC DUAL_EXP_LBC DUAL_EXP_SC
DUAL_ETH_DCR DUAL_ETH_PASC DUAL_ETH_LBC DUAL_ETH_SC
DUAL_MUSIC_DCR DUAL_MUSIC_PASC DUAL_MUSIC_LBC DUAL_MUSIC_SC

cpuminer-opt is compiled several different CPUs in this image. I built this image with a G4560 CPU.

This motherboard requires the following bios changes before it will work correctly with nvOC:

ensure 'Above 4G Decoding' is enabled in the bios.

ensure PTP aware OS: is set to 'Not PTP Aware' in the bios.

ensure you 'Clear Secure Boot Keys' in the bios.

Please note to use 9x cards you must use: 2x m2_to_pcie_adapters.

will this image work on ASUS H270 PLUS PRIME ? It has same 2 M.2 slots.

The H270 is a different chipset; so I am not sure if it will work. I should get a H270 PLUS PRIME in today and should be able to test it / make an image for it tonight.

fullzero

legendary

Activity: 1260

Merit: 1009

Quote from: citronick on June 02, 2017, 09:26:07 AM

Quote from: bentcrypto on June 02, 2017, 09:11:29 AM

Quote from: citronick on June 02, 2017, 08:30:56 AM

Quote from: bentcrypto on June 02, 2017, 07:07:04 AM

Built my first real rig and got nvOC up and running last night...great job fullzero!

Is anyone having problems with payouts from nanopool? My account shows confirmed transaction but my Jaxx ZEC wallet is empty?? First time I have used nanopool.

I feel your pain... drop nanopool op an email to inquire.

I gave up on ZEC pools quite a while ago.

I now directly sell my ZEC hash to who want to rent it out at Nicehash, and get BTC upfront without the waiting for confirmation bs.

Thanks mate, I sent them an email.

I usually mine at nicehash too but I wanted to try getting paid in ZEC to see how it compares to getting BTC at nicehash.

Is it easy to edit the bashfile to get nvOC to mine at nicehash?

I always check at whattomine.com and see how far apart mining ZEC directly and selling at NH.... sometimes NH is higher than mining ZEC.
ZEC pools like Nanopool, Flypool, Dwarfpool..... struggles whenever difficulty level happens... its quite frustrating because you get the first few payments likely after a day or two depending on confirmation etc. then it goes to your wallet (Poloniex, Jaxx etc).... then these guys will have their own issues etc. by the time you see stable and consistent ZEC coin balance it will be many days later...... then you want to exchange ZEC to BTC ..... you get another layer of fees to do that and another confirmation wait Huh

In NH marketplace for ZEC / Equihash -- I see the trends of supply and demand, and there is huge demand spiking several times a day and paying premium rates (ie. higher than mining direct). BTC this high now, I rather get BTC upfront as fast as possible. Sure I will probably lose about 10-15% on average but I dont have to worry about ZEC coins getting lost from pool to wallet; and the more confirmations.

I guess thats the price I have to pay for getting rental BTCs to my wallet at the same time everyday.

in onebash, just edit the ZEC pool infomation to as follows:

ZEC address:
pool: equihash.usa.nicehash.com
port: 3357

Nicehash should be easy and convenient. Thanks for showing how to do this with oneBash citronick.

In regards to payment problem: you can see if the problem is with nanopool or Jaxx by looking at your ZEC address with a block explorer.

Use https://explorer.zcha.in/ to search your address transactions.

If the payment transactions are there then the problem is with Jaxx; if they are not then the problem is with nanopool.

viperman2

newbie

Activity: 29

Merit: 0

Hi, i'have imaged the OS to hard drive and its working fine.
Just right after the boot terminal window is opened and start executing some commands with message of sudo password.
Is this by design or i should put some intervention. At the end after 20-30 minutes of waiting i got claymore miner started and got error that no space to create DAG file.

fullzero

legendary

Activity: 1260

Merit: 1009

Quote from: xaeder on June 02, 2017, 06:28:11 AM

So my cards arrived

6x MSI GTX 1070 AERO 8G OC GeForce GTX 1070 8GB GDDR5 OC PCIE

Any experience with those and what should I modify?

I'll be testing it on Carbon tomorrow morning with the bios you instructed and will tell you how it goes.

I haven't tested those cards; maybe someone else has and can give you suggestions. I recommend starting with a low OC and increasing it by small amounts until the OC becomes unstable.

fullzero

legendary

Activity: 1260

Merit: 1009

Quote from: viperman2 on June 02, 2017, 06:18:05 AM

Hi,
i bought a few ASUS DUAL 1060s 6GB , and i'm going to test your OS.

I saw that this v0014 is specific for USB keys, i would like to use 3.5 HDD, will you provide download link to older version. Thanks.

I already removed the removed the older images. Currently images imaged to an SSD or HDD will not autoboot oneBash without changes or (unless a usb to sata adapter is used. I will fix this eventually, I have been prioritizing making supported images for member requested mobos.

for using an SSD or HDD see:

https://bitcointalksearch.org/topic/m.19212139

https://bitcointalksearch.org/topic/m.19300078

If you have trouble after imaging let me know.

viperman2

newbie

Activity: 29

Merit: 0

It is intended to prompt for password right after the screen is up??? whats the workaround to fix that.

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: bentcrypto on June 02, 2017, 09:11:29 AM

Quote from: citronick on June 02, 2017, 08:30:56 AM

Quote from: bentcrypto on June 02, 2017, 07:07:04 AM

Built my first real rig and got nvOC up and running last night...great job fullzero!

Is anyone having problems with payouts from nanopool? My account shows confirmed transaction but my Jaxx ZEC wallet is empty?? First time I have used nanopool.

I feel your pain... drop nanopool op an email to inquire.

I gave up on ZEC pools quite a while ago.

I now directly sell my ZEC hash to who want to rent it out at Nicehash, and get BTC upfront without the waiting for confirmation bs.

Thanks mate, I sent them an email.

I usually mine at nicehash too but I wanted to try getting paid in ZEC to see how it compares to getting BTC at nicehash.

Is it easy to edit the bashfile to get nvOC to mine at nicehash?

I always check at whattomine.com and see how far apart mining ZEC directly and selling at NH.... sometimes NH is higher than mining ZEC.
ZEC pools like Nanopool, Flypool, Dwarfpool..... struggles whenever difficulty level happens... its quite frustrating because you get the first few payments likely after a day or two depending on confirmation etc. then it goes to your wallet (Poloniex, Jaxx etc).... then these guys will have their own issues etc. by the time you see stable and consistent ZEC coin balance it will be many days later...... then you want to exchange ZEC to BTC ..... you get another layer of fees to do that and another confirmation wait Huh

In NH marketplace for ZEC / Equihash -- I see the trends of supply and demand, and there is huge demand spiking several times a day and paying premium rates (ie. higher than mining direct). BTC this high now, I rather get BTC upfront as fast as possible. Sure I will probably lose about 10-15% on average but I dont have to worry about ZEC coins getting lost from pool to wallet; and the more confirmations.

I guess thats the price I have to pay for getting rental BTCs to my wallet at the same time everyday.

in onebash, just edit the ZEC pool infomation to as follows:

ZEC address:
pool: equihash.usa.nicehash.com
port: 3357

bentcrypto

full member

Activity: 186

Merit: 100

Quote from: citronick on June 02, 2017, 08:30:56 AM

Quote from: bentcrypto on June 02, 2017, 07:07:04 AM

Built my first real rig and got nvOC up and running last night...great job fullzero!

Is anyone having problems with payouts from nanopool? My account shows confirmed transaction but my Jaxx ZEC wallet is empty?? First time I have used nanopool.

I feel your pain... drop nanopool op an email to inquire.

I gave up on ZEC pools quite a while ago.

I now directly sell my ZEC hash to who want to rent it out at Nicehash, and get BTC upfront without the waiting for confirmation bs.

Thanks mate, I sent them an email.

I usually mine at nicehash too but I wanted to try getting paid in ZEC to see how it compares to getting BTC at nicehash.

Is it easy to edit the bashfile to get nvOC to mine at nicehash?

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: bobers on June 02, 2017, 08:56:10 AM

I have some olds motherbords with no name USB flashes and nvOS works well after i modifed xorg. Now i bought 2 MSI270 A Pro, load image for it on Lexar 32gb. I dont know why but nvOS loading very slowly, im waiting about 30 min with black screen on both MB.
What do i do wrong? I flashed new BIOS and setup it like fullzero said. Also i have 6 Gigabyte min 1070 with USB power risers rev 006c each one connected to each one sata.

My old MB with 2gb RAM loads within 5-10 min, new both MSI with 8GB DDR4 about 30 min

even 5 minutes is too long for any OS to load....

Windows load under 30 seconds.... smOS/Ubuntu loads even faster... Sad

bobers

member

Activity: 73

Merit: 10

I have some olds motherbords with no name USB flashes and nvOS works well after i modifed xorg. Now i bought 2 MSI270 A Pro, load image for it on Lexar 32gb. I dont know why but nvOS loading very slowly, im waiting about 30 min with black screen on both MB.
What do i do wrong? I flashed new BIOS and setup it like fullzero said. Also i have 6 Gigabyte min 1070 with USB power risers rev 006c each one connected to each one sata.

My old MB with 2gb RAM loads within 5-10 min, new both MSI with 8GB DDR4 about 30 min

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: bentcrypto on June 02, 2017, 07:07:04 AM

Built my first real rig and got nvOC up and running last night...great job fullzero!

Is anyone having problems with payouts from nanopool? My account shows confirmed transaction but my Jaxx ZEC wallet is empty?? First time I have used nanopool.

I feel your pain... drop nanopool op an email to inquire.

I gave up on ZEC pools quite a while ago.

I now directly sell my ZEC hash to who want to rent it out at Nicehash, and get BTC upfront without the waiting for confirmation bs.

rabbitr32

newbie

Activity: 22

Merit: 0

Quote from: fullzero on June 02, 2017, 01:07:01 AM

I added a fully compatible nvOC image for the ASUS Z270-F GAMING Motherboard

https://s13.postimg.org/q08huqnyv/IMG_0270.jpg

The SHA256 hash (for the zip) is:

Quote

7abd76fc656f9605086535dc71215437288689e644f72e3fe1ba54d3f9f87f4d

ASUS Z270-F GAMING up to 9x cards with 2x m2_to_pcie_adapters (note all OC) Link Grin

nvOC is for fast 16gb or larger USB keys see the OP for a link

This image includes plusCPU setting to enable cpuminer-opt to mine XMR while mining another COIN with the GPUs.

This image has the newest oneBash supporting these COIN selections:

ZEC ZCL FTC LBC MUSIC ETC EXP ETH DCR PASC
DUAL_ETC_DCR DUAL_ETC_PASC DUAL_ETC_LBC DUAL_ETC_SC
DUAL_EXP_DCR DUAL_EXP_PASC DUAL_EXP_LBC DUAL_EXP_SC
DUAL_ETH_DCR DUAL_ETH_PASC DUAL_ETH_LBC DUAL_ETH_SC
DUAL_MUSIC_DCR DUAL_MUSIC_PASC DUAL_MUSIC_LBC DUAL_MUSIC_SC

cpuminer-opt is compiled several different CPUs in this image. I built this image with a G4560 CPU.

This motherboard requires the following bios changes before it will work correctly with nvOC:

ensure 'Above 4G Decoding' is enabled in the bios.

ensure PTP aware OS: is set to 'Not PTP Aware' in the bios.

ensure you 'Clear Secure Boot Keys' in the bios.

Please note to use 9x cards you must use: 2x m2_to_pcie_adapters.

will this image work on ASUS H270 PLUS PRIME ? It has same 2 M.2 slots.

bentcrypto

full member

Activity: 186

Merit: 100

Built my first real rig and got nvOC up and running last night...great job fullzero!

Is anyone having problems with payouts from nanopool? My account shows confirmed transaction but my Jaxx ZEC wallet is empty?? First time I have used nanopool.

xaeder

member

Activity: 90

Merit: 10

So my cards arrived

6x MSI GTX 1070 AERO 8G OC GeForce GTX 1070 8GB GDDR5 OC PCIE

Any experience with those and what should I modify?

I'll be testing it on Carbon tomorrow morning with the bios you instructed and will tell you how it goes.

viperman2

newbie

Activity: 29

Merit: 0

Hi,
i bought a few ASUS DUAL 1060s 6GB , and i'm going to test your OS.

I saw that this v0014 is specific for USB keys, i would like to use 3.5 HDD, will you provide download link to older version. Thanks.

fullzero

legendary

Activity: 1260

Merit: 1009

I added a fully compatible nvOC image for the ASUS Z270-F GAMING Motherboard

The SHA256 hash (for the zip) is:

Quote

7abd76fc656f9605086535dc71215437288689e644f72e3fe1ba54d3f9f87f4d

ASUS Z270-F GAMING up to 9x cards with 2x m2_to_pcie_adapters (note all OC) Link Grin

nvOC is for fast 16gb or larger USB keys see the OP for a link

This image includes plusCPU setting to enable cpuminer-opt to mine XMR while mining another COIN with the GPUs.

This image has the newest oneBash supporting these COIN selections:

ZEC ZCL FTC LBC MUSIC ETC EXP ETH DCR PASC
DUAL_ETC_DCR DUAL_ETC_PASC DUAL_ETC_LBC DUAL_ETC_SC
DUAL_EXP_DCR DUAL_EXP_PASC DUAL_EXP_LBC DUAL_EXP_SC
DUAL_ETH_DCR DUAL_ETH_PASC DUAL_ETH_LBC DUAL_ETH_SC
DUAL_MUSIC_DCR DUAL_MUSIC_PASC DUAL_MUSIC_LBC DUAL_MUSIC_SC

cpuminer-opt is compiled several different CPUs in this image. I built this image with a G4560 CPU.

This motherboard requires the following bios changes before it will work correctly with nvOC:

ensure 'Above 4G Decoding' is enabled in the bios.

ensure PTP aware OS: is set to 'Not PTP Aware' in the bios.

ensure you 'Clear Secure Boot Keys' in the bios.

Please note to use 9x cards you must use: 2x m2_to_pcie_adapters.

fullzero

legendary

Activity: 1260

Merit: 1009

Quote from: yun9999 on June 01, 2017, 11:30:58 PM

PM me your address. I will send you 1. No need to buy it. I'm also willing to support your Dashboard too should you need some service like Amazon Cloud hosting services or something. Let me know. Will be happy to support your awesome work.

Sounds good, I'm not 100% sure I will be able to get 7x with that chipset; but most likely it is doable.

yun9999

sr. member

Activity: 414

Merit: 251

PM me your address. I will send you 1. No need to buy it. I'm also willing to support your Dashboard too should you need some service like Amazon Cloud hosting services or something. Let me know. Will be happy to support your awesome work.

Topic: [OS] nvOC easy-to-use Linux Nvidia Mining - page 401. (Read 418253 times)