Ok i figured it out i think,
I simply had to raise the RPM
MIN: 2000
Max: 3500
Now it will speed up to full fans if needed, Every card brand is different and adjust according
Topic: OverdriveNTool How to set fans properly (Read 180 times)
Hi, I been using overdriventool for a couple month's now and really enjoy the simplicity of the OC settings, Everything there is fine. But the fan control's I do not all understand?
I have all AMD RX570's
Asus gaming OC 4gb & MSI Armours 4gb,8gb & XFX 4gb RX570's
My question is about the acoustical limit and RPM speeds?
Because i have the MSI and XFX Cards will go above the target temp of 60C, and the fan speed is only 48%. matter of fact all of the msi wont go above 48% fan speed and going above the target temp, what am i doing wrong?
RPM LOW: 1330
RPM HIGH: 2200
Target Temp: 60c
Acoustical Limit: 910 Mhz
OC Settings:
1100/1150 CC
850 VC
2000Mhz
900VC
All 1500 Timing Strap Bios modded
I have all AMD RX570's
Asus gaming OC 4gb & MSI Armours 4gb,8gb & XFX 4gb RX570's
My question is about the acoustical limit and RPM speeds?
Because i have the MSI and XFX Cards will go above the target temp of 60C, and the fan speed is only 48%. matter of fact all of the msi wont go above 48% fan speed and going above the target temp, what am i doing wrong?
RPM LOW: 1330
RPM HIGH: 2200
Target Temp: 60c
Acoustical Limit: 910 Mhz
OC Settings:
1100/1150 CC
850 VC
2000Mhz
900VC
All 1500 Timing Strap Bios modded
Jump to: