Also OP before running again if your getting this hot to cause damage.... work on cooling. I would not run again if you know it is hot to the point it will damage miner's.
I think you need to do this for the 9 others. As if problem is still there you chances will have it happen again. But I hope it was just PSU. Might open it up and see if visible damage due to heat on anything.
Topic: Overheated S4 Antminer, what to do? (Read 754 times)
Thanx I will give it a go!
90% chance you hosed the psu .
I think you said you had more s4's
I have no idea if you skills at tearing down gear.
If you are up to the task of pulling 1 psu from a working s4 to put in the dead s4 if the dead s4 work you are certain you need a psu.
I think you said you had more s4's
I have no idea if you skills at tearing down gear.
If you are up to the task of pulling 1 psu from a working s4 to put in the dead s4 if the dead s4 work you are certain you need a psu.
First make sure the powersupply is ok.
If it's totally dead, no fans or nothing i would suspect the psu. There might be a thermal protection inside the PSU.
Are you able to measure the PSU in any way? Disconnect everything, and connect a fan to it?
I don't have any special knowledge about the S4, but i suspect it's pretty much the same as S6.
If it's totally dead, no fans or nothing i would suspect the psu. There might be a thermal protection inside the PSU.
Are you able to measure the PSU in any way? Disconnect everything, and connect a fan to it?
I don't have any special knowledge about the S4, but i suspect it's pretty much the same as S6.
Is it totally dead? Or is it some kind of life in it?
Are you sure the powersupply is OK?
Are you sure the powersupply is OK?
I dont get any lights, nothing! I thought when they hit 80 they shut down for safety not completely!
What happened, when I set the room up the door closed and before I noticed they room over heated and that miner shut down.
Thanx
Is it totally dead? Or is it some kind of life in it?
Are you sure the powersupply is OK?
Are you sure the powersupply is OK?
I baught 10 S4 miners and overheated 1 of them. It basically shut down and I dont know how to restart it.
I thought it might have been a fuse but I cant find the problem. Is it goosed?
Thanx
I thought it might have been a fuse but I cant find the problem. Is it goosed?
Thanx
Jump to: