Topic: P106-100 mining problem (Read 202 times)
I will like to know the type of motherboard you are using, I had same problem mining on a AMD motherboard and I was able to fix it by switching OS to Linux, windows OS ain't bad but Linux is more stable, about the overclocking I guess you are doing it wrong, gtx1660ti performs better if you underclock when mining ETH
Write the specifications of the hardware and operating system.
If the card falls off in mining, then perhaps you have set a very high overclocking or, on the contrary, very low consumption limits.
You need to choose these settings individually for each card.
Use Hive OS, there are many settings profiles for each equipment.
If the card falls off in mining, then perhaps you have set a very high overclocking or, on the contrary, very low consumption limits.
You need to choose these settings individually for each card.
Use Hive OS, there are many settings profiles for each equipment.
Hello, I have 4 p106-100 miner cards. But I am having driver problems. i am using phoenixminer. I downloaded drivers from various sites and Nvidia original site. My miner cards appear in the device manager, but sometimes the cards go down when mining. Sometimes it drops to 3 cards, sometimes the computer is reset. But I do not have such a problem with the RX570s.
But NiceHashOS does not have such a problem.
I think the problem is the driver.
What is the reason and where can I download the appropriate driver.
But NiceHashOS does not have such a problem.
I think the problem is the driver.
What is the reason and where can I download the appropriate driver.
Jump to: