Topic: P6T6 WS Revolution Motherboard & 7970 Graphics Card Mining Rig Issues (Read 1706 times)

Ya I defiantly dont know what i am doing but am a quick learner. I have several rigs up and mining and have actually got them doing a good job. I want to look into liquid cooling them before I try and push the cards to hard. 

what ram do you actually have? also might as well put it all to auto if your not actually going to overclock it or know what you are doing

I'm getting started on a new rig.  I'm using a Asus P6t6 WS Revolution Motherboard and I've got 7970 gigabyte edition graphics cards.  I'm having difficulty getting the BIOs on the Motherboard right.  Also, its only recognizing 1 out of 3 graphics cards.  I'm also having trouble with the ram, I have 2 4g but they seem to powerful even though I have 64 bit windows os.  Anyone have any suggestions?  Anyone have a similar rig?  Any help would be greatly appreciated.

Here are the bio settings I have right now:
Asus P6T6 WS Revolution
BIOS Template


Asus P6T6 WS Revolution
0407 Bios Template

****************************
AI Tweaker
****************************
AI Overclock Tuner: Manual
CPU Ratio Setting: 20
BCLK Frequency: 133
PCIE Frequency: 100
DRAM Frequency: DDR3-1066Mhz
UCLK Frequency: 2133Mhz
QPI Link Data Rate: AUTO

*******************
DRAM Timing Control
*******************
DRAM CAS Latency: 7 DRAM Clock
DRAM RAS# to CAS# Delay : 7 DRAM Clock
DRAM RAS# PRE Time: 7 DRAM Clock
DRAM RAS# ACT Time: 24 DRAM Clock
DRAM RAS# to RAS# Delay: AUTO
DRAM REF Cycle Time: AUTO
DRAM WRITE Recovery Time: AUTO
DRAM READ to PRE Time: AUTO
DRAM FOUR ACT WIN Time: AUTO
DRAM Back-To-Back CAS# Delay: AUTO

DRAM Timing Mode: AUTO
DRAM Round Trip Latency on CHA: AUTO
DRAM Round Trip Latency on CHB: AUTO
DRAM Round Trip Latency on CHC: AUTO

DRAM WRITE To READ Delay(DD): AUTO
DRAM WRITE To READ Delay(DR): AUTO
DRAM WRITE To READ Delay(SR): AUTO
DRAM READ To WRITE Delay (DD): AUTO
DRAM READ To WRITE Delay (DR): AUTO
DRAM READ To WRITE Delay (SR): AUTO
DRAM READ To READ Delay(DD): AUTO
DRAM READ To READ Delay(DR): AUTO
DRAM READ To READ Delay(SR): AUTO
DRAM WRITE To WRITE Delay(DD): AUTO
DRAM WRITE To WRITE Delay(DR): AUTO
DRAM WRITE To WRITE Delay(SR): AUTO

****************************
CPU Voltage: AUTO
CPU PLL Voltage: 1.80
QPI/DRAM Core Voltage: 1.20
IOH Voltage: 1.10
IOH PCIE Voltage: 1.50
ICH Voltage: 1.10
ICH PCIE Voltage: 1.50
DRAM Bus Voltage: 1.60
DRAM DATA REF Voltage on CHA: AUTO
DRAM CTRL REF Voltage on CHA: AUTO
DRAM DATA REF Voltage on CHB: AUTO
DRAM CTRL REF Voltage on CHB: AUTO
DRAM DATA REF Voltage on CHC: AUTO
DRAM CTRL REF Voltage on CHC: AUTO
****************************
Load-Line Calibration: AUTO
CPU Differential Amplitude: AUTO
CPU Clock Skew: AUTO
CPU Spread Spectrum: Disabled
IOH Clock Skew: AUTO
PCIE Spread Spectrum: Disabled

CPU Advance Settings
C1E Support: Disabled
Hardware Prefetcher: Enabled
Adjacent Cache Line Prefetcher: Enabled
Intel (R) Virtualization Tech: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
Intel (R) HT Technology: Enabled
Active Processor Cores: ALL
A20M: Disabled
Intel (R) C-State Tech: Disabled
****************************
Express Gate: Disabled