Author

Topic: Page AntMiner (Read 860 times)

legendary
Activity: 1456
Merit: 1000
February 23, 2016, 02:14:59 PM
#11

Ready… thank you all so much for your help…. it worked!

Glad it worked! I like looking via router myself. 

And some scanning programs are great others suck and are dangerous if you don't know what your doing.  If you set wrong address range... you might just be hitting someone over the web which is no good.
newbie
Activity: 23
Merit: 0
February 23, 2016, 12:11:16 PM
#10

Ready… thank you all so much for your help…. it worked!
legendary
Activity: 1456
Merit: 1000
February 22, 2016, 03:54:46 PM
#9


It is an S7.

If you connect to your router do you see it on list of connected devices?   Should be able to go down list tying IP's and one  of them should be it... with it hashing it should be up and running fine.

How did you set it up on pools to hash?  I'm guessing you connected to it before.
newbie
Activity: 23
Merit: 0
February 22, 2016, 10:44:42 AM
#8


It is an S7.
legendary
Activity: 1624
Merit: 1130
Bitcoin FTW!
February 22, 2016, 07:35:41 AM
#7
Scan your ips. I found this one off the top of my head, angryip.org/download. First, unplug the miner and scan. Then scan with miner on. If there is a difference, use that ip in your browser. Should work.
If your router isn't set to 192.168.1.x, that may also be the problem.
legendary
Activity: 1302
Merit: 1068
February 21, 2016, 09:18:15 PM
#6


Also what is the miner? ... It is fine.


What? o.o;
What is the miner. What is what is it? An S1, S2, S5, etc?

But since you say you're getting the hashrate on the poolside, its most likely you're using the wrong ip. Connect to your router to figure it out.
newbie
Activity: 23
Merit: 0
February 21, 2016, 09:16:12 PM
#5


Also what is the miner? ... It is fine.

Are the LEDs on as normal? ... Yes

Is the miner beeping? ... No

Are you getting hashrate on the poolside? ... Yes.
legendary
Activity: 1302
Merit: 1068
February 21, 2016, 04:43:39 PM
#4

Thank you Virosa and excuse me (I'm a newbie) but what mean DHCP?
Since yesterday I cann`t connected to this page:

http://xxx.xxx.x.xxx/cgi-bin/minerStatus.cgi



DHCP mode tells your router to automatically assign an IP to the miner. IF you're on static, it will always give it that address and typically not resolve an IP conflict issue by itself.

Also what is the miner? Are the LEDs on as normal? Is the miner beeping? Are you getting hashrate on the poolside?

Regardless you need to go on your router and check what ip the device is connecting with.
newbie
Activity: 23
Merit: 0
February 21, 2016, 03:27:47 PM
#3

Thank you Virosa and excuse me (I'm a newbie) but what mean DHCP?
Since yesterday I cann`t connected to this page:

http://xxx.xxx.x.xxx/cgi-bin/minerStatus.cgi

legendary
Activity: 1302
Merit: 1068
February 21, 2016, 05:20:02 AM
#2


I can not connect to the page AntMiner to monitor my miner. Is it a general failure?

Since when? Always? Are you on the same subnet as the miner? If this is a new occurrence connect to your router and check which IP the miner is connected to. If its on DHCP maybe it received a new address.
newbie
Activity: 23
Merit: 0
February 21, 2016, 04:12:27 AM
#1


I can not connect to the page AntMiner to monitor my miner. Is it a general failure?
Jump to: