Pandaminer B3 Plus Question | Bitcointalksearch.org

ebrain

newbie

Activity: 28

Merit: 0

Quote from: philipma1957 on September 12, 2017, 07:20:22 PM

Quote from: ebrain on September 11, 2017, 12:32:05 PM

I have got my first B3+ from Panda miner. It came with an external power supply. There are seven power ports on the panda miner that I connected to the power supply, six actually with the seven port getting the second head of sixth connection.

I did not have the same plug as the power supply so I used a different cable to plug in the power supply to the wall. After connecting everything the power supply turns on but the PandaMiner doesn't turn on even if I press the small button on its surface.

Is it because my power source is 110 V (in USA) and I need to get a transformer to 220 V ?

Anybody who has setup Pandaminer B3+ in USA, can you please share the details. Thanks.

transformers suck don't get one.

this psu works

https://www.amazon.com/EVGA-SuperNOVA-Crossfire-Warranty-120-G2-1300-XR/dp/B00COIZTZM/ref=sr_1_2?

Thank you! I am getting Bitmain APW3+ power supply, will that work too? http://shop.bitmain.com/productDetail.htm?pid=00020170810145351509wM7QTNd9067F

ebrain

newbie

Activity: 28

Merit: 0

Quote from: chiwalfrm on September 12, 2017, 01:18:34 PM

Quote from: ebrain on September 12, 2017, 01:02:43 PM

Can anybody please share their setup information for Pandaminer B3+? Did you have the buy the 110 to 220 V transformer? Thanks!

It is a 220V power supply. you need the correct voltage. A transformer might work if it can handle the watts (1300W+) but it's going to get very hot, use even more power due to transformer conversion, and may cause a fire if the transformer can't handle it. You really should either have 240V service (in the USA your electrician can wire this for you), or replace the Panda power supply with a PC one that can handle the watts and has seven PCI-E connectors. The HP server ones i see often (1200watt model) CAN'T do it because it is 1200watts at 240volts, and only 900watts at 120v.

Thank you, Will the Bitmain APW3+ power supply work ? http://shop.bitmain.com/productDetail.htm?pid=00020170810145351509wM7QTNd9067F

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: ebrain on September 11, 2017, 12:32:05 PM

I have got my first B3+ from Panda miner. It came with an external power supply. There are seven power ports on the panda miner that I connected to the power supply, six actually with the seven port getting the second head of sixth connection.

I did not have the same plug as the power supply so I used a different cable to plug in the power supply to the wall. After connecting everything the power supply turns on but the PandaMiner doesn't turn on even if I press the small button on its surface.

Is it because my power source is 110 V (in USA) and I need to get a transformer to 220 V ?

Anybody who has setup Pandaminer B3+ in USA, can you please share the details. Thanks.

transformers suck don't get one.

this psu works

https://www.amazon.com/EVGA-SuperNOVA-Crossfire-Warranty-120-G2-1300-XR/dp/B00COIZTZM/ref=sr_1_2?

bigassboy

sr. member

Activity: 373

Merit: 254

Quote from: ebrain on September 12, 2017, 01:02:43 PM

Can anybody please share their setup information for Pandaminer B3+? Did you have the buy the 110 to 220 V transformer? Thanks!

The pandaminer "on" switch is located on the side of the miner next to the Ethernet port, you need a pin or sharp object to press it. Did you done that already?

chiwalfrm

member

Activity: 84

Merit: 10

Quote from: ebrain on September 12, 2017, 01:02:43 PM

Can anybody please share their setup information for Pandaminer B3+? Did you have the buy the 110 to 220 V transformer? Thanks!

It is a 220V power supply. you need the correct voltage. A transformer might work if it can handle the watts (1300W+) but it's going to get very hot, use even more power due to transformer conversion, and may cause a fire if the transformer can't handle it. You really should either have 240V service (in the USA your electrician can wire this for you), or replace the Panda power supply with a PC one that can handle the watts and has seven PCI-E connectors. The HP server ones i see often (1200watt model) CAN'T do it because it is 1200watts at 240volts, and only 900watts at 120v.

ebrain

newbie

Activity: 28

Merit: 0

Can anybody please share their setup information for Pandaminer B3+? Did you have the buy the 110 to 220 V transformer? Thanks!

ebrain

newbie

Activity: 28

Merit: 0

I have got my first B3+ from Panda miner. It came with an external power supply. There are seven power ports on the panda miner that I connected to the power supply, six actually with the seven port getting the second head of sixth connection.

I did not have the same plug as the power supply so I used a different cable to plug in the power supply to the wall. After connecting everything the power supply turns on but the PandaMiner doesn't turn on even if I press the small button on its surface.

Is it because my power source is 110 V (in USA) and I need to get a transformer to 220 V ?

Anybody who has setup Pandaminer B3+ in USA, can you please share the details. Thanks.

Topic: Pandaminer B3 Plus Question (Read 548 times)