Topic: Pascal eats alot of watts and exhaust alot of temp. miner unstable!!! (Read 1971 times)

m1n1ngP4d4w4n I always read threads from the beginning.  I've been very busy lately; eventually (probably later today) I will read through it and consider your posts.

edit:


I do almost exactly the same thing as you; go figure.  I want to do alot more with the data; but I want to do a lot of things, and I haven't gotten to it yet.


With pascal I use ZOTAC mini 1070's, ZOTAC amp 1060 6gb's, EVGA 1060 SC 6gb's, and EVGA 1050ti SC's.  The mini 1070's aren't as good as an EVGA FTW, but they are probably better in terms of $/hash.  I also think they will be easier to resell later as many gamer's use ridiculously small cases that full size cards cant fit into.


I agree with this for ZEC.  I never mined FTC, XMR or LBRY with pascal so I have no reference there; good to have some data.  With ETC/ETH; claymore 7.4 for windows I could get 33mh/s each ( mini's can only do -200 ) but I would always have to start the mining instance before applying the memory oc.  The linux 7.4 is not as good and I could only ever get ~30mh/s each.

With my mini's their default clocks are lower than the FTW so some of offsets I use are different, they can do ~2625 sol/s with full power and ~2550 sol/s with 830 watts, so not quite as good as FTW's.  However, you can get them for $370 which is alot cheaper than the $469 that the FTW2 costs now (the FTW is discontinued).  I also haven't spent the time to optimize the voltages, so there is some small room for improvement with the mini's.







I disagree, I can clone an ssd to another ssd in ~2 minutes, or an ssd to usb in ~10 minutes.  

What client / settings do you recommend for lbry?

guess he didn't read the link i gave to yun's topic....

you mean miner? i'm using the ccminer 1.8.4

lbry i still believe in the pump, it can't be that investors bought all the way down without reason

i mined zcoin when it shifted to the new fork for changing the algo and it was good for the first 3 hours or so, very profitable now on par with the others

Well i gave you what i mine as a nvidia miner. If you want more nvidia mining info check you yun999 topic i post quite a bit of infos there https://bitcointalksearch.org/topic/data-center-mining-garage-and-man-mining-cave-1761303

Just use Whattomine to see what is the most profitable, at the moment i switch alot between pascal & lbry, zcash/zclassic come close second behind those, and sometimes during the day you have VTC/FTC that rise up too.

sp mod or nicehash can do 1000+ with a 1070 or 4500MH with 750watt

With nvidia miner i don't report anything out of the ordinary, it's rock stable, power draw & temps are the same as other algos, everything very nice

Has nothing to do with miners...pascal is based on the bitcoin algo (its essentialy two bitcoin hashes in one with some other changes). The core kernel has been optimized to hell since bitcoin GPU days, so the reason your rigs are running hot and crashing is because this algo utilizes nearly 100% of the GPU compute die (since SHA256 hashes are 100% compute an almost zero memory dependence).

If you have pushed your clocks or voltages for ZEC or ETH its almost guaranteed to fail for pascal. Both ZEC and ETH are idling on the core while mem accesses are happening for a large percentage of core clocks, and thats the main reason they are way more stable and forgiving (unless you push the mem side of things of course).

Like somone else mentioned the current crop of GPU miners are spoiled...you guys should have mined back in the BTC/Litecoin GPU days 

On paper - yes.

In theory still ETH, or even XMR which uses alot less power.

RX470 8GB on XMR ~ 90W. That's a big deal.

lol, pascalminer its the most stable miner i've ever use, even its first come,
power comsumption ZEC vs PASC = 750 vs 900, 20% more, but its good for RX series, the most profitable coin for RX at the moment
if claymore make this optimized miner it definetly PASC will die.....

ahh this guys taht dont know nothing ... hig power... you hsould have been here mining sha ro scrypt with gpus ... when a 6x rig used to take 2kwh from wall.....  pascal is kinda low power today since the new cards (rx 470 is very efficient) ... lower your ram and a bit your voltage... and dont oc as miner is not optimized...

I am now sure 100% that he deserve his fee to the last penny, he really know how to write a miner

claymore to the rescue??? 

Even the core clock is unstable like claymore miner i also found that when i use teamviewer it pushes the core clock to max and the hashrate of the card is push 20mh more

Same here my miner shows 1600mh pool shows1350mh

Power usage is high because its SHA256, thats basically entirely GPU compute and those use the most GPU resources. However its doesnt use much memory so you can downclock your memory very low to like 300Mhz.

you're right, my gpu's compared to zec are much hotter ( about ~8C ) and power draw is also bigger. Im waiting for another miner or better optimization for current miner  

There is also difference between miner and pool hashrate  miner shows ~1300mh/s on two cards, pool shows ~1000mh/s 

I was mining zcash before pascal i found a big diffrence
First in the gpu temp that rises at least 7-10 degrees for pascal and also the wattage rises about 20 watt per card or even more , the miner is kind of shitminer unstable all the time---- is there any good miners for pascal??! or just this one because if not i think its good to switch back to zec until a real miner comes out.