Topic: PC won't boot with more than 3 GPU's (Read 420 times)
I have the same mobo with 6x RX 570 and Windows 10. My rig wouldnt boot until I installed Windows in GPT mode instead of MBR.
set 4G enabled ?
Yes, i did through EZFlash to the latest bios. What could be else?
Hello,
Did you update your BIOS to the newest version?
Did you update your BIOS to the newest version?
Hi, here's my GPU miner config:
Windows 10
PSU Thermaltake Gold rated 1475W
MB Asus Z270-P (set all PCI-E to Gen2 and enabled 4G)
8GB Kingston HyperX
Core i3 (LGA1151)
SSD Kingston 128 gb Sata
6xGigabyte GTX 1070
6xUSB risers x1-x16
My rig starts without any issues with 3GPU's. If i use more than 3 GPU's it won't boot, just hangs on the black screen and blinking cursor. Later i've enabled 4G thingy, then it started to boot after 5 minutes, then in Device manager it detects it, but drivers won't install (windows one). If i add 5th GPU it won't boot again. What could be an issue?
Windows 10
PSU Thermaltake Gold rated 1475W
MB Asus Z270-P (set all PCI-E to Gen2 and enabled 4G)
8GB Kingston HyperX
Core i3 (LGA1151)
SSD Kingston 128 gb Sata
6xGigabyte GTX 1070
6xUSB risers x1-x16
My rig starts without any issues with 3GPU's. If i use more than 3 GPU's it won't boot, just hangs on the black screen and blinking cursor. Later i've enabled 4G thingy, then it started to boot after 5 minutes, then in Device manager it detects it, but drivers won't install (windows one). If i add 5th GPU it won't boot again. What could be an issue?
Jump to: