PDU Recommendations | Bitcointalksearch.org

ZiG

sr. member

Activity: 406

Merit: 250

Quote from: xjack on May 29, 2014, 06:15:30 PM

For 120v I'm using Web Power Switch and Ethernet Power Controller II from http://www.digital-loggers.com/

For 240v I'm using an APC 7911A.

These are all switched/metered. You'll save a bundle if you don't need management features.

OP, you mentioned PDU. For 20 OC'd antminers, you're going to need PDUs - plural.

APC 7911A is 20 outlets...for about $650 & change... Grin

I just bought APC 7571A ...10 outlets ...for $99 ... Wink

Both are 208V ...

ZiG

Edit : I have 10 Ants S1...you will need 2 of these...

xjack

hero member

Activity: 539

Merit: 500

For 120v I'm using Web Power Switch and Ethernet Power Controller II from http://www.digital-loggers.com/

For 240v I'm using an APC 7911A.

These are all switched/metered. You'll save a bundle if you don't need management features.

OP, you mentioned PDU. For 20 OC'd antminers, you're going to need PDUs - plural.

ZiG

sr. member

Activity: 406

Merit: 250

Quote from: psjw4450 on May 28, 2014, 06:40:55 PM

I have a 200 amp single phase service setup just for mining and was wondering what PDU would be recommended for setting up 20 Antminers S2.

Super...!

What VOLTAGE is it...110V or 208V...?

ZiG

Edit...: ...Single phase...110V...I guess... Wink

klondike_bar

legendary

Activity: 2128

Merit: 1005

ASIC Wannabe

IMHO go with whatever you find cheapest. My two suggestions:

1) L6-30 outlets and PDU. 30A gives you about 5kW of safely usable power. i suggest buying the outlets ($50 new) on ebay for <$20.

2) use regular 120V components but swap a neutral for a hot. Its the absolute cheapest and easiest way and is safe for hardware (not sure if its safe for a surge protector?). However, this is very much against code. if someone plugged in a 120V appliance not knowing it was a 208V circuit they would explode. or whatever happens when a basic 120V appliance is extremely overloaded in a split second...

TyrTheAlpha

member

Activity: 63

Merit: 10

Great question. O'Wise Ones please answer with pictures and links

psjw4450

sr. member

Activity: 342

Merit: 250

I have a 200 amp single phase service setup just for mining and was wondering what PDU would be recommended for setting up 20 Antminers S2.

Topic: PDU Recommendations (Read 711 times)