please guide me about power supply | Bitcointalksearch.org

cptfisher

hero member

Activity: 649

Merit: 505

Quote from: Cacaparg on October 15, 2016, 04:00:54 AM

Quote from: kelstasy on October 08, 2016, 03:46:41 AM

The 390X will consume about 240W, this means it's possible for my ss 520w psu can handle 2 390X?

The 520W cannot handle two 390X unless you undervolt and under clock the R9 390X to consume about 200-220W.

is not wise to run a psu 100% of his loat 24/7 ... more over it depends on the amper you ahve on the 12v rail.... a psu has many rails (3 5 and 12 volts...
ie : i have an enermax revolution 87 850w

it is rated 840w at 12v but can give up to 970w if u consider also 5v and 3v

if your psu is rated at 12v 520w then u can plug 2 cards but make sure you undervolt em a lil and make sure you have a quality psu

Cacaparg

hero member

Activity: 835

Merit: 502

Quote from: kelstasy on October 08, 2016, 03:46:41 AM

The 390X will consume about 240W, this means it's possible for my ss 520w psu can handle 2 390X?

The 520W cannot handle two 390X unless you undervolt and under clock the R9 390X to consume about 200-220W.

kelstasy

full member

Activity: 130

Merit: 100

Blocklancer - Freelance on the Blockchain Close

The 390X will consume about 240W, this means it's possible for my ss 520w psu can handle 2 390X?

Cacaparg

hero member

Activity: 835

Merit: 502

Quote from: amirheavy666 on October 07, 2016, 05:32:44 AM

I have one power supply 1000w Raidmax vampire.

I am mining now with 3 GPU ( one R9 390x - one R9 380 - One R9 280) and give about 70 MHZ..

can i plus one new GPU to them. ( for example One R9 290x or R9 470) ?

how can calculate it with any software?

please guide

thanks

The 390X will consume about 240W, the 380 and 280 will consume 160W each, so the total is 560. You can add one 290x without problem.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: amirheavy666 on October 07, 2016, 05:32:44 AM

I have one power supply 1000w Raidmax vampire.

I am mining now with 3 GPU ( one R9 390x - one R9 380 - One R9 280) and give about 70 MHZ..

can i plus one new GPU to them. ( for example One R9 290x or R9 470) ?

how can calculate it with any software?

please guide

thanks

this is an alt coin question. to answer your question let me look that psu up

is this your psu?

http://www.raidmax.com/power-supplies_rx-1000gh.html

it uses 2 rails 60 amps each

http://nebula.wsimg.com/f004abc91134b75341152b7a59e5788c?AccessKeyId=DA64EA8F167C2341D75F&disposition=0&alloworigin=1

total of 972 watts max which means you need to watch how you load it up.

software is kind of worthless your best shot is attach the pc to this

https://www.amazon.com/P3-P4400-Electricity-Usage-Monitor/dp/B00009MDBU/ref=sr_1_1?

and see if you are doing 600 watts at the moment if you are at 600 watts I think you can add 1 rx 470 like this

https://www.amazon.com/MSI-RADEON-470-GAMING-2Displayport/dp/B01JS9F9K4/ref=sr_1_1?

I don't think adding an r9 290x can be done.

amirheavy666

full member

Activity: 228

Merit: 101

NEM (XEM) Top Coin

I have one power supply 1000w Raidmax vampire.

I am mining now with 3 GPU ( one R9 390x - one R9 380 - One R9 280) and give about 70 MHZ..

can i plus one new GPU to them. ( for example One R9 290x or R9 470) ?

how can calculate it with any software?

please guide

thanks

Topic: please guide me about power supply (Read 550 times)