Author

Topic: Please help!!! (Read 1077 times)

legendary
Activity: 1456
Merit: 1000
September 06, 2016, 02:44:05 PM
#6
I got another spondoolies sp20 miner and it's works well, but this one is broken or something wrong with them, any recommendations what can i do with this miner?

It sounds like this is a new miner to you on this unit.   I would check your router on connected devices and see if you see a IP there for it.  You can use programs to scan, but logging into router is pretty solid method.

If you don't see it I would ask seller what they had the IP setting's on.  They can tell you if you are looking for DHCP or a certain static IP.  If you don't see it and seller is no help, know PSU works, good ethernet, etc. then you can look for a recovery SD card image.  It appears no longer to be on SP site so might take some searching through forum.
newbie
Activity: 7
Merit: 0
September 06, 2016, 12:38:05 PM
#5
I got another spondoolies sp20 miner and it's works well, but this one is broken or something wrong with them, any recommendations what can i do with this miner?
legendary
Activity: 1498
Merit: 1030
September 04, 2016, 06:32:10 PM
#4
Most likely the miner is on DHCP - the best solution is to set up your own DHCP server on your computer, don't even connect to the Internet at all, connect the SP-20 to your computer via your router, make sure YOUR ROUTER doesn't have a DHCP service running on it, and look at the logs of YOUR DHCP server to see what address the SP20 is connecting at, then go into it to reset it to a static address on your normal subnet where you can FIND it to point a web browser at it.

 Alternatively, if you can access the logs on your router and it is running a DHCP server, you can skip the "set up your own DHCP server on your computer" part and just use the one on the router.
newbie
Activity: 7
Merit: 0
August 31, 2016, 03:30:04 PM
#3
Myminer.io no works for me :-( something is wrong but i already connect miner on my router , i don't know where's is a problem.  It's in possible when my router doesn't support this miner?
newbie
Activity: 59
Merit: 0
August 31, 2016, 03:02:27 PM
#2
Hey there, I found a really useful article for setting up your SP20 which you might find useful. It is very in depth and will hopefully cover any problems you might be having.

https://bitcointalksearch.org/topic/guide-dogies-comprehensive-spondooliestech-sp20-setup-hd-886633

Let me know if it helps you out, it covers router setup and configuration.
newbie
Activity: 7
Merit: 0
August 31, 2016, 02:02:11 PM
#1
Hello i bought SP20 miner, but i have a problem, i already connected them on my router, but my pc cant find them, whats wrong with them? I think maybe problem is with my router i have router from Sky . Power supply is 2x 650W and all ok. I tried to use advanced ip scanner and nothing, then i go to my router settings check ip what devices is connected and again nothing show only my desktop pc and my phone ip , but not my miner ip.
Jump to: