Please help getting my R9 280X mining and my GTX670 used for display? Thx!

hutnik

member

Activity: 95

Merit: 10

Well this realy helped me

My LCD have ports for both DVI and D-sub, So instead of using dummy plug, I've plugged DVI from GTX460 as main monitor, and D-sub from 280x as secondary into the monitor, and set their position so I don't accidentally get any windows to second desktop

____________
|.................|
|..secondary.|
|___________|__________
...................|...............|
...................|...primary..|
...................|_________|

Tweek

sr. member

Activity: 308

Merit: 250

CoinTweak profitability charts

I use about the same

Code:

"intensity" : "13",
"thread-concurrency": "8192",
"gpu-threads" : "2",
"gpu-engine" : "950",
"gpu-memclock" : "1500",
"temp-hysteresis" : "3",
"worksize" : "256",
"vectors" : "1",
"lookup-gap" : "2",
"log" : "5",
"queue" : "1",
"expiry" : "120",

"temp-cutoff" : "90",
"temp-overheat" : "85",
"temp-target" : "80",

This keeps it at around 80-85 degrees with quite a bit of noise though and at 640-650kh/s. I'm guessing I may need to add an extra fan to my casing where I get an airflow towards my card so that it doesn't need to pull in all the cool air itself.

Snard

full member

Activity: 140

Merit: 100

Sounds good. If it helps, these are the settings I use:

Code:

-w 256 -v 1 -I 18 -g 2 -l 1 --thread-concurrency 12250 --gpu-memclock 1500 --gpu-engine 1080 --shaders 2048 --temp-cutoff 85

Some may be redundant.

Tweek

sr. member

Activity: 308

Merit: 250

CoinTweak profitability charts

Playing around a bit, getting between 600-700kh/s but I don't want it to be too noisy since I sleep in the same room. Can't put it anywhere else. Sad

Snard

full member

Activity: 140

Merit: 100

Great. What are your speeds?

Tweek

sr. member

Activity: 308

Merit: 250

CoinTweak profitability charts

Quote from: Snard on January 15, 2014, 04:04:58 PM

Run it from a command prompt. You are missing the info we need. From a command prompt type and in the cgminer folder:

Code:

cgminer -n > out.txt

Then open out.txt and post that.

Is this a dual card system or single card?

Code:

[2014-01-15 22:12:41] CL Platform 0 vendor: NVIDIA Corporation
[2014-01-15 22:12:41] CL Platform 0 name: NVIDIA CUDA
[2014-01-15 22:12:41] CL Platform 0 version: OpenCL 1.1 CUDA 6.0.1
[2014-01-15 22:12:41] Platform 0 devices: 1
[2014-01-15 22:12:41] 0 GeForce GTX 670
[2014-01-15 22:12:41] CL Platform 1 vendor: Advanced Micro Devices, Inc.
[2014-01-15 22:12:41] CL Platform 1 name: AMD Accelerated Parallel Processing
[2014-01-15 22:12:41] CL Platform 1 version: OpenCL 1.2 AMD-APP (1348.5)
[2014-01-15 22:12:41] Platform 1 devices: 1
[2014-01-15 22:12:41] 0 Tahiti
[2014-01-15 22:12:41] Failed to ADL_Adapter_ID_Get. Error -1
[2014-01-15 22:12:41] Failed to ADL_Adapter_ID_Get. Error -1
[2014-01-15 22:12:41] Failed to ADL_Adapter_ID_Get. Error -1
[2014-01-15 22:12:41] Failed to ADL_Adapter_ID_Get. Error -1
[2014-01-15 22:12:41] Failed to ADL_Adapter_ID_Get. Error -1
[2014-01-15 22:12:41] Failed to ADL_Adapter_ID_Get. Error -1
[2014-01-15 22:12:41] Failed to ADL_Adapter_ID_Get. Error -1
[2014-01-15 22:12:41] Failed to ADL_Adapter_ID_Get. Error -1
[2014-01-15 22:12:41] Failed to ADL_Adapter_ID_Get. Error -1
[2014-01-15 22:12:41] Failed to ADL_Adapter_ID_Get. Error -1
[2014-01-15 22:12:41] ADL found less devices than opencl!
[2014-01-15 22:12:41] There is possibly more than one display attached to a GPU
[2014-01-15 22:12:41] Use the gpu map feature to reliably map OpenCL to ADL
[2014-01-15 22:12:41] WARNING: Number of OpenCL and ADL devices did not match!
[2014-01-15 22:12:41] Hardware monitoring may NOT match up with devices!
[2014-01-15 22:12:41] 1 GPU devices max detected
[2014-01-15 22:12:41] USB all: found 15 devices - listing known devices
[2014-01-15 22:12:41] No known USB devices

This any better?
Running GTX 670 and radeon R9 280x together.

I am trying to run it with --gpu-platform=1 -d 0 like you, but cgminer just keeps running on the GTX 670

RE-EDIT: My bad, apparently there was a setting for gpu-platform in the conf file I got as well. Setting it there and in my bat seemed to got me mining on the 280x. Thank you for all the help! You made me a happy newb

Snard

full member

Activity: 140

Merit: 100

Run it from a command prompt. You are missing the info we need. From a command prompt type and in the cgminer folder:

Code:

cgminer -n > out.txt

Then open out.txt and post that.

Is this a dual card system or single card?

Tweek

sr. member

Activity: 308

Merit: 250

CoinTweak profitability charts

http://imagizer.imageshack.us/v2/800x600q90/24/qqaf.png
Is what I am getting, had to make a screenshot real quick because the window closes.

Snard

full member

Activity: 140

Merit: 100

Run cgminer -n and post the results up to the USB part. We dont care about usb.

Tweek

sr. member

Activity: 308

Merit: 250

CoinTweak profitability charts

Can you please explain to me how you did it?
My 280x arrived today and I have them both running (and able to game) on the same system, but cgminer won't recognise my 280x to mine on. Sad

I have installed only the drivers and amd app sdk for the 280x.

Snard

full member

Activity: 140

Merit: 100

Thanks... what I have discovered is that even with a dummy plug installed, my Sapphire Toxic gets throttled so that I can only achieve a max of ~550khps. Once I plug the monitor directly into it, I can get normal speeds of 700+. I know the dummy plug is working because when I plug it in, Windows immediately shows the second virtual desktop. If i remove it, it disappears. So the dummy plug is being seen by Windows.

Going to play with this some more and see if I can figure out whats going on.

foodies123

sr. member

Activity: 322

Merit: 250

Quote from: Snard on January 12, 2014, 10:43:12 AM

OK well I was able to get it working. To be honest not 100% sure what I did. I did have to specify the correct gpu platform, which for me was 1.

So it had to use the --gpu-platform=1 -d 0 to specify the card.

Unfortunately, I am not getting the hashrate I was expecting, with averaging around 560. This is really much lower than I expect so need to play with it some.

I also am unable to read the temp or or other speeds using programs like GPUz, which is frustrating.

Last, but not least, I went out and made a dummy plug as per the overclock topic, but I am able to mine with the card without it, so not sure whats going on.

1. step 1 go to step 2
2. add this to your cgminer command line: -I 13 -g 2 -w 256 --lookup-gap 2 --thread-concurrency 8129 --gpu-engine 1035 --gpu-memclock 1500 --auto-fan --temp-cutoff 95 --temp-overheat 75 --auto-gpu
3. start cgminer
4. watch gpu rise 700+ kh/s
5. Huh

?
6. profit

assuming you've got at least 13.11 driver (13.12 recommended)

Snard

full member

Activity: 140

Merit: 100

OK well I was able to get it working. To be honest not 100% sure what I did. I did have to specify the correct gpu platform, which for me was 1.

So it had to use the --gpu-platform=1 -d 0 to specify the card.

Unfortunately, I am not getting the hashrate I was expecting, with averaging around 560. This is really much lower than I expect so need to play with it some.

I also am unable to read the temp or or other speeds using programs like GPUz, which is frustrating.

Last, but not least, I went out and made a dummy plug as per the overclock topic, but I am able to mine with the card without it, so not sure whats going on.

Tweek

sr. member

Activity: 308

Merit: 250

CoinTweak profitability charts

Quote from: Snard on January 11, 2014, 06:02:56 PM

Got it to work and will share how I think I did it in a bit.

Want to confirm first if you need the AMD SDK installed in order to mine with AMD cards?

Unfortunatly I don't know but I will ask in some other forum for you to try and get your question solved as well.

EDIT: I guess you do

Quote

If you have an ATI/AMD card you’ll need the AMD-APP-SDK, which can download here. Also make sure your ATI/AMD drivers are up to date.

http://cryptocur.com/litecoin/litecoin-ltc-gpu-mining/

Snard

full member

Activity: 140

Merit: 100

Got it to work and will share how I think I did it in a bit.

Want to confirm first if you need the AMD SDK installed in order to mine with AMD cards?

Tweek

sr. member

Activity: 308

Merit: 250

CoinTweak profitability charts

I have always been taught that both an amd and an nvidia card won't run stable together on the same system because of driver clashes. This might be the problem, if not I am curious how you fixed it because I have a 670 as well and an 280x on the way.

foodies123

sr. member

Activity: 322

Merit: 250

run a test cgminer command with --scrypt and pool address and login and see what cgminer reports if it works just run cgminer with -d n (where n is the number of the gpu count starting from 0 - the pcie slot closest to the cpu)

Snard

full member

Activity: 140

Merit: 100

I have been mining SHA coins with my erupters, scrypt with my gtx670 using cudaminer, and cpu with cloud miners. I just recently received a R9 280x and want to use that for mining and the GTX670 for display. games, etc.

I have the AMD drivers installed as well as created a dummy dvi-vga adapter. Both cards are recognized by Windows when its booted up. I can't though seem to get cgminer 3.7.2 or below to mine with my R9. It, and cudaminer, work fine against the GTX670.

Is there anything else I need to install in order to get the R9 mining? Is there a different program I should be using?

FYI, hen I run cgminer -n, it appears to detect my R9, but has some errors as shown below:

Code:

[2014-01-11 16:26:17] CL Platform 0 vendor: NVIDIA Corporation

[2014-01-11 16:26:17] CL Platform 0 name: NVIDIA CUDA
[2014-01-11 16:26:17] CL Platform 0 version: OpenCL 1.1 CUDA 6.0.1

[2014-01-11 16:26:17] Platform 0 devices: 1
[2014-01-11 16:26:17] 0 GeForce GTX 670
[2014-01-11 16:26:17] CL Platform 1 vendor: Advanced Micro Devices, Inc.

[2014-01-11 16:26:17] CL Platform 1 name: AMD Accelerated Parallel Processing

[2014-01-11 16:26:17] CL Platform 1 version: OpenCL 1.2 AMD-APP (1348.5)

[2014-01-11 16:26:17] Platform 1 devices: 1
[2014-01-11 16:26:17] 0 Tahiti
[2014-01-11 16:26:17] Failed to ADL_Adapter_ID_Get. Error -1

[2014-01-11 16:26:17] Failed to ADL_Adapter_ID_Get. Error -1

[2014-01-11 16:26:17] Failed to ADL_Adapter_ID_Get. Error -1

[2014-01-11 16:26:17] Failed to ADL_Adapter_ID_Get. Error -1

[2014-01-11 16:26:17] GPU 0 AMD Radeon R9 200 Series hardware monitoring enabled
[2014-01-11 16:26:17] 1 GPU devices max detected
[2014-01-11 16:26:17] USB all: found 25 devices - listing known devices

Topic: Please help getting my R9 280X mining and my GTX670 used for display? Thx! (Read 2104 times)