Topic: Please help gpu not functioning right. (Read 117 times)
Do you enabled [Above 4G] in bios ?
Patch the GPUs and set to 'compute' rather than 'graphics' processing.
Make sure your drivers are up to date.
Make sure your drivers are up to date.
Can you please tell me how to set it to compute not graphics ?
Patch the GPUs and set to 'compute' rather than 'graphics' processing.
Make sure your drivers are up to date.
Make sure your drivers are up to date.
Hello, I have a mining rig with 6x 1080 Ti but there is a card doesn't behave right I'm mining on nicehash and the whenever this card is connected the miner works for about a minute or two and show the message "unspecified launch" or "illegal memory access" i googled these errors it turns out that this errors comes up when there is a faulty overclocking but all my cards are running in stock speeds so i tried ccminer and it crashes or never starts or keeps spamming in the console "failed to validate results on cpu" when the errors mentioned from nicehash miner comes the rig becomes very slowly until i stop the miner and some times it crashes the nicehash miner and sometimes the whole windows and the rig is working perfectly fine with the other 5 gpus what should i do is it a gpu bios problem or what? the cards which is faulty is "EVGA GeForce GTX 1080 Ti SC2".
Thanks.
Forgot to mention i even tried underclocking this faulty card while trying it by itself and still the problem not solved.
Thanks.
Forgot to mention i even tried underclocking this faulty card while trying it by itself and still the problem not solved.
If you missed to overclock the card perfect level means your card will malfunctioned and mining may not works better in the any algorithm buddy. Power supply not matter since you mentioned that you are having 3000 watts power supply to maintain the 5 cards.
Check the person who is best in overclock and please do not touch the bios setting. Samsung RAMs only give the high hash rate. If you overclock too much with the knowledge on it. With in 2 months effects will show out for sure buddy.
ya know before posting about something you should really read the OP's post, THE GPUS ARE NOT OVERCLOCKED, in fact he even states he tried to UNDERCLOCK them. do you have trouble fully reading peoples posts or what? there are many things that can cause a gpu to run unstable, but that doesn't mean its malfunctioning, malfunction implies its doing something that the gpu should not be doing like producing artifacts on a perm basis, that's a malfunctioning gpu. what he describes is NOT a malfunction but more of a slight issue
you missed the whole post, so please before posting read and understand what the OP is saying and or asking about
Hello, I have a mining rig with 6x 1080 Ti but there is a card doesn't behave right I'm mining on nicehash and the whenever this card is connected the miner works for about a minute or two and show the message "unspecified launch" or "illegal memory access" i googled these errors it turns out that this errors comes up when there is a faulty overclocking but all my cards are running in stock speeds so i tried ccminer and it crashes or never starts or keeps spamming in the console "failed to validate results on cpu" when the errors mentioned from nicehash miner comes the rig becomes very slowly until i stop the miner and some times it crashes the nicehash miner and sometimes the whole windows and the rig is working perfectly fine with the other 5 gpus what should i do is it a gpu bios problem or what? the cards which is faulty is "EVGA GeForce GTX 1080 Ti SC2".
Thanks.
Forgot to mention i even tried underclocking this faulty card while trying it by itself and still the problem not solved.
Thanks.
Forgot to mention i even tried underclocking this faulty card while trying it by itself and still the problem not solved.
If you missed to overclock the card perfect level means your card will malfunctioned and mining may not works better in the any algorithm buddy. Power supply not matter since you mentioned that you are having 3000 watts power supply to maintain the 5 cards.
Check the person who is best in overclock and please do not touch the bios setting. Samsung RAMs only give the high hash rate. If you overclock too much with the knowledge on it. With in 2 months effects will show out for sure buddy.
You say that sometime miner works perfectly with 5 GPU's, and at the start of OP you say that you mine with 6 GPU's. If everything works fine with 5 GPU's, maybe that 1 extra GPU is making problem (if its always the same one). I would suggest for you to try out every GPU and see which one is problematic. If that is not the case, and all GPU's work just fine, than its either software of its CPU like CryptoWatcher420 says. If its software than consider contacting Nicehash support, maybe they can help. Other than that, I guess we can not do much without more details.
if it was the psu he wouldn't be able to run all of them, but instead its having issues with validating the work on the cpu,
first off till you post full system specs hardly anyone will be able to help you and those that can help prolly wont as you have not provided enough information
with 1080ti's that your running id say its a problem with the cpu being too shitty since its not validating the work from the gpus
that said, whats your spec's of the whole system that's having problems with 1 of the gpus
first off till you post full system specs hardly anyone will be able to help you and those that can help prolly wont as you have not provided enough information
with 1080ti's that your running id say its a problem with the cpu being too shitty since its not validating the work from the gpus
that said, whats your spec's of the whole system that's having problems with 1 of the gpus
Yes there is more than enough power,about 3000watt and i have seen when the power is not enough the rig just shuts down
Hello, I have a mining rig with 6x 1080 Ti but there is a card doesn't behave right I'm mining on nicehash and the whenever this card is connected the miner works for about a minute or two and show the message "unspecified launch" or "illegal memory access" i googled these errors it turns out that this errors comes up when there is a faulty overclocking but all my cards are running in stock speeds so i tried ccminer and it crashes or never starts or keeps spamming in the console "failed to validate results on cpu" when the errors mentioned from nicehash miner comes the rig becomes very slowly until i stop the miner and some times it crashes the nicehash miner and sometimes the whole windows and the rig is working perfectly fine with the other 5 gpus what should i do is it a gpu bios problem or what? the cards which is faulty is "EVGA GeForce GTX 1080 Ti SC2".
Thanks.
Forgot to mention i even tried underclocking this faulty card while trying it by itself and still the problem not solved.
Thanks.
Forgot to mention i even tried underclocking this faulty card while trying it by itself and still the problem not solved.
How is your PSU(s), enought power for all of those.
Hello, I have a mining rig with 6x 1080 Ti but there is a card doesn't behave right I'm mining on nicehash and the whenever this card is connected the miner works for about a minute or two and show the message "unspecified launch" or "illegal memory access" i googled these errors it turns out that this errors comes up when there is a faulty overclocking but all my cards are running in stock speeds so i tried ccminer and it crashes or never starts or keeps spamming in the console "failed to validate results on cpu" when the errors mentioned from nicehash miner comes the rig becomes very slowly until i stop the miner and some times it crashes the nicehash miner and sometimes the whole windows and the rig is working perfectly fine with the other 5 gpus what should i do is it a gpu bios problem or what? the cards which is faulty is "EVGA GeForce GTX 1080 Ti SC2".
Thanks.
Forgot to mention i even tried underclocking this faulty card while trying it by itself and still the problem not solved.
Thanks.
Forgot to mention i even tried underclocking this faulty card while trying it by itself and still the problem not solved.
Jump to: