- 2xAvalon 4 Module 55 Nm
- 29 x BitFury Block Eruptors
- 8 x BitFury Red's
- 1 x BFL Jalapeno
- 1 x BitFury Mining Blade
- 1 x ATI Raedon 7990
- 2 x ATI Raedon 7700
I use a variety of differnt versions of CGMiner depending on the hardware and p2pool
Topic: Please Help - Lots of dead on P2Pool. (Read 794 times)
I have the following hardware:
I use a variety of differnt versions of CGMiner depending on the hardware and p2pool
I use a variety of differnt versions of CGMiner depending on the hardware and p2pool
what hardware/software do you use?
have you tried adding a /x after the username address,
you can refer to this handy post for optimising your setup
https://bitcointalksearch.org/topic/a-guide-for-mining-efficiently-on-p2pool-includes-fud-repellent-and-faq-153232
you can refer to this handy post for optimising your setup
https://bitcointalksearch.org/topic/a-guide-for-mining-efficiently-on-p2pool-includes-fud-repellent-and-faq-153232
I've been on P2Pool for only 5 days now, and in the last 24 hours I've received a surge of dead shares...
On the P2Pool wiki it states "Very high dead rates can indicate miner misconfiguration.".. Does anyone know what exactly it means by mis-configuration? When setting my miners up, I try to keep the rejected shares under 7% and if it get's higher than that i'll lower the intensity.
Is there anyone here that has experience with P2Pool to help me out?
My earnings has tanked as you can see in my earnings graph:
Here is my P2Pool info:
Local rate
7.66MH/s (8.8% DOA)
Expected time to share
0.601 hours (36.1 minutes)
Shares
135 total (12 orphaned, 10 dead) Efficiency: 98.35%
Payout if a block were found NOW
0.2229656LTC
Pool rate
1.53GH/s (15% DOA+orphan)
Share difficulty
3.86
Node uptime
4.533 (108.790 hours)
Peers
6 out, 7 in
Current block value
50.259LTC
Expected time to block
2.23 hours
On the P2Pool wiki it states "Very high dead rates can indicate miner misconfiguration.".. Does anyone know what exactly it means by mis-configuration? When setting my miners up, I try to keep the rejected shares under 7% and if it get's higher than that i'll lower the intensity.
Is there anyone here that has experience with P2Pool to help me out?
My earnings has tanked as you can see in my earnings graph:
Here is my P2Pool info:
Local rate
7.66MH/s (8.8% DOA)
Expected time to share
0.601 hours (36.1 minutes)
Shares
135 total (12 orphaned, 10 dead) Efficiency: 98.35%
Payout if a block were found NOW
0.2229656LTC
Pool rate
1.53GH/s (15% DOA+orphan)
Share difficulty
3.86
Node uptime
4.533 (108.790 hours)
Peers
6 out, 7 in
Current block value
50.259LTC
Expected time to block
2.23 hours
Jump to: