Please help me with connecting these hardwares

MashRinx

sr. member

Activity: 389

Merit: 250

Going to bite and assume you're not trolling.

If you only have plans to use 1 GPU in that machine, the PCI-E riser really isn't necessary and could possibly add some instability to your rig for not real gain, but I'm guessing that won't be the case.

Regarding the cabling all of the cables you are trying to connect should be pretty well labled. There should be a big 40 pin connector that goes from the PSU to your MB and probably an 8-pin that goes to another CPU-specific plug on the motherboard. As chek2fire stated, two specific cables (6 & 8-pin) should go from the PSU to the GPU. If you do go the riser path, an additional cable will be needed on the PSU to connect to the MOLEX power connector on the riser.

Good luck!

chek2fire

legendary

Activity: 3430

Merit: 1142

Ιntergalactic Conciliator

To connect the power for your card you need the psu cable 1 in your photo. You need a 8 pin and 6 pin connector. You can see the cable connector will write pci-e on them. Look and this photo with the same card

http://www.hardocp.com/image.html?image=MTM4MzU2MDQ0NmJIUmV2OXdQY01fMV80X2wuanBn

Joztissi007

newbie

Activity: 8

Merit: 0

Hi

I've took Pictures of my GPU + CABLES, PSU + CABLES, MOTHERBOARD , PCI-E.

Please check out my Pics and help me with the connections.

If you would give me a point wise instructions based on my pictures which cable goes where and fits where..will help me really to get it connected.

I didn't take pics of my another PSU 850 watts...because i just need to know how to connect psu with the gpus and motherboard..so i can do the same with the other PSU.

Here are the pictures -

http://www.jotform.com/table/40841871946059

Thank you

Topic: Please help me with connecting these hardwares (Read 841 times)