Hello, all.
I have a bitcoin blade running a single blade working great, however when I plug a new blade into the backplane both blades stop working, I have a single lan wire, for the first blade so I just spliced another cable onto the original cable and it stopped working although the splices work each with their individual blades but not together, do I need some sort of Ethernet box to do the connecting.? If I do what would you recommend for me to connect 2 blades together both 10+ Gh/S.
Thank you for your time.
I have a bitcoin blade running a single blade working great, however when I plug a new blade into the backplane both blades stop working, I have a single lan wire, for the first blade so I just spliced another cable onto the original cable and it stopped working although the splices work each with their individual blades but not together, do I need some sort of Ethernet box to do the connecting.? If I do what would you recommend for me to connect 2 blades together both 10+ Gh/S.
Thank you for your time.
Ethernet communication cables are not at all similar to power cables. Each ethernet cable needs to have its own dedicated port into a network switch port. The network switch will then plug into your WAN device that is typically provided by your internet supplier.
http://0.tqn.com/d/compnetworking/1/0/c/c/two-router-network.png
I would like to see a picture of your splicing job. Those wires are tiny! ;-P