Author

Topic: Please Help Noob finalize his dreams - Need AntminerS1 x3 Remote setup help (Read 1581 times)

sr. member
Activity: 434
Merit: 250
I don't think there is a way to remotely log into an S1. I have Teamviewer set up on a PC Connected to my network and I log into that to check the status on my S1's. It's free for residential use.

You want ssh: http://www.linuxmanpages.com/man1/ssh.1.php

Once set up you can log into your miners remotely, provided you have their IP addresses. You can also create a tunnel across an ssh connection that will allow you to bring up the webui if that's more your speed.


newbie
Activity: 60
Merit: 0
I don't think there is a way to remotely log into an S1. I have Teamviewer set up on a PC Connected to my network and I log into that to check the status on my S1's. It's free for residential use.
sr. member
Activity: 294
Merit: 250
sr. member
Activity: 294
Merit: 250
The S1's are all powered up and running and hard wired. No need to include the Raspberry Pi.

Looking for simple 1, 2, 3 instructions for logging in to each and configuring them to mine at ghash.io

anyone? Dogie?
legendary
Activity: 1456
Merit: 1018
HoneybadgerOfMoney.com Weed4bitcoin.com
hmm in a nutshell your easiest (free) bet is to install chromium on the raspberry pi image.

Login to the antminers at your friends house. 
Go into the networking settings and set your WWAN setup (click edit) to be 'Static' and not dynamic.  Make them a new IP address (192.168.1.129 for instance)  Save and restart.  Now repeat again for the next antminer - but be sure to make a different IP address.  (if you use wifi setup then simply change your wifi ip to static and repeat the above.

 
Now, from home|work|ufo|wherever chrome remote desktop connect from your pc to connect to your chromium browser on the pi within your friend's network!  To remotely change settings simply login to chrome remote desktop on your pi and open a new chrome browser tab and administer away!
sr. member
Activity: 294
Merit: 250
Hey gang!

Have my antimerS1 Dual Blades up and running at a friend's house. He's got the network and reliability and is always on site.

So! I'm not much of a computer genius and had hoped for some setup help. Looking for one of you guys that will log in and help get this running. It shouldn't be hard for someone who has done it before. I just don't want to further confuse things.

3x S1 Antminer Dual Blades

username: xxxxx password: xxxxxx
miner1: http://xxxxxxxxxxxxxxxxxxxxx
miner2: http://xxxxxxxxxxxxxxxxxxxxxxx
miner3: http://xxxxxxxxxxxxxxxxxxxxxx

username: minepeon password: xxxxxxxxxxxxxx
raspberry pi: https://xxxxxxxxxxxxxxxxxxxxxxx

Simply want the three boxes chewing away at GHash.IO
Anyone want to help with this setup? Anyone want to get in there and get it running with a review of what was done?

Please help before these things are completely useless!

Jump to: