Topic: please help on antminer s9 GH/S(RT) is showing 0.0000 (Read 246 times)
Ok thanks, i will try a little of cleaning and also do some work with my electricity to put the input voltage 220V, i will cross my fingers, after all the hope is the last thing it dies if not repair as you said or work with 2/3 of the S9 i will keep you inform after i do that for anybody else that is presenting the same issues
Ah, well that is another kind of failure, unfortunately not as uncommon on S9's as it should be. If you do see the board hashing for a bit before it drops out on a cold restart perhaps a cleaning would help. Otherwise repair starts to be the only solution, or just run it as a 2/3rds S9 (S6?).
The issue also is if i disconnect the other boards and leaving the one with the problem the behavior is the same keeps showing 0.0000
Ok thanks for the answer i miss the point sorry 1200W for 110V, i am currently using 110V
What input voltage to the PSU? If it's only 110V then that's your problem. The bitmain PSU is only rated for the full 1600W output with 220V input, less if you're on 110V...
So I ask again, what input voltage are you using?
it has double input
1.- input 110V - 14A
2.- input 220V - 10A
i assume i can connect either 110V or 220V of course i am consuming more power at 110V
1.- input 110V - 14A
2.- input 220V - 10A
i assume i can connect either 110V or 220V of course i am consuming more power at 110V
What input voltage to the PSU? If it's only 110V then that's your problem. The bitmain PSU is only rated for the full 1600W output with 220V input, less if you're on 110V...
APW3++ provided by the bitmain site in fact i purchased the PSU with the antminer
What PSU are you using?
nothing yet 
Same issue, did you solved it?
I replaced my hash board under warranty and after replacement got 15 degree
I replaced my hash board under warranty and after replacement got 15 degree
Can someone help me one of the hashboards is showing 0 in GH/S(RT) the temp 15 degrees and the status is ok, could you help me or give a recommendation in the pool my max hash rate is 10 TH my machine should be around the 13.5 TH
The screenshot of the miner status is this
https://drive.google.com/open?id=1vUK1zjcLDKrkVZxB1KNV6JEoT8Ag5RZ4
https://drive.google.com/open?id=1Vc94GZE8IpGpfT68Pm3AGx6q3XRw84bQ
The log status is this
https://drive.google.com/open?id=1j5DBfTekCLk16TiFqkKtWplB89itenNT
The screenshot of the miner status is this
https://drive.google.com/open?id=1vUK1zjcLDKrkVZxB1KNV6JEoT8Ag5RZ4
https://drive.google.com/open?id=1Vc94GZE8IpGpfT68Pm3AGx6q3XRw84bQ
The log status is this
https://drive.google.com/open?id=1j5DBfTekCLk16TiFqkKtWplB89itenNT
Jump to: