but really thank you for your answer mining bro's.
I threw it in the garbage last night. it belong there.
Topic: Please, Snow Panther Miner A1 but I Not received IP access to the web config. (Read 342 times)
April 22, 2020, 03:37:31 AM
Thank you guys i try these ways that you told me but these are not work.
but really thank you for your answer mining bro's.
I threw it in the garbage last night. it belong there.
but really thank you for your answer mining bro's.
I threw it in the garbage last night. it belong there.
March 29, 2020, 10:47:28 AM
thank you for your response, but i still have no hashrate.
https://pasteboard.co/IUNmYby.jpg
https://pasteboard.co/IUNmYby.jpg
The pool URL and worker seem fine, assuming you do have a sub-account in Viabtc which is under the name "sabetti" if not then it won't work, also I think the default password is "x" and not "1234" for Viabtc unless stated otherwise by you.
it's also safe to try a different pool, for example, cksolo pool with the following details:
URL:stratum+tcp://de.ckpool.org
Port:3333
Worker: Enter a bitcoin address
password: x
February 15, 2020, 07:55:21 AM
Hey Bro.
thank you for your response, but i still have no hashrate.
some pictures of my pool setting and dashboard and status are here:
is any wrong here?
https://pasteboard.co/IUNmYby.jpg
https://pasteboard.co/IUNndYB.jpg
https://pasteboard.co/IUNnLzj.jpg
i used stratum+tcp://btc.viabtc.com:443 and stratum+tcp://bitcoin.viabtc.com:443 with :443 and without :443 in URL pool.
also i used other port too (3333,25).
i still dont know where is the problem. what can i do?
thank you for your response, but i still have no hashrate.
some pictures of my pool setting and dashboard and status are here:
is any wrong here?
https://pasteboard.co/IUNmYby.jpg
https://pasteboard.co/IUNndYB.jpg
https://pasteboard.co/IUNnLzj.jpg
i used stratum+tcp://btc.viabtc.com:443 and stratum+tcp://bitcoin.viabtc.com:443 with :443 and without :443 in URL pool.
also i used other port too (3333,25).
i still dont know where is the problem. what can i do?
February 10, 2020, 04:48:31 PM
thank you for your information but i have a new question.
i have bitfily A1 49th but i dont have any hashrate i dont know why? the PSU No is not active but all the fans and hashbord and mainboard is ON and working even i can see all the 6 hashbord on my status.
also i send a pic of my status.
https://pasteboard.co/ITUjpij.jpg
can you help me?
i have bitfily A1 49th but i dont have any hashrate i dont know why? the PSU No is not active but all the fans and hashbord and mainboard is ON and working even i can see all the 6 hashbord on my status.
also i send a pic of my status.
https://pasteboard.co/ITUjpij.jpg
can you help me?
It seems that you are mining on the ViaBTC pool.
Did you try to check your pool setup?
Check it if there are some extra space or character delete it or replace the pool server to any of this
- stratum+tcp://btc.viabtc.com:443
- stratum+tcp://bitcoin.viabtc.com:443
Change the port(443) to 25 or 3333 if it still doesn't work. Then update here.
February 09, 2020, 11:44:12 AM
thank you for your information but i have a new question.
i have bitfily A1 49th but i dont have any hashrate i dont know why? the PSU No is not active but all the fans and hashbord and mainboard is ON and working even i can see all the 6 hashbord on my status.
also i send a pic of my status.
https://pasteboard.co/ITUjpij.jpg
can you help me?
i have bitfily A1 49th but i dont have any hashrate i dont know why? the PSU No is not active but all the fans and hashbord and mainboard is ON and working even i can see all the 6 hashbord on my status.
also i send a pic of my status.
https://pasteboard.co/ITUjpij.jpg
can you help me?
September 26, 2019, 08:40:21 AM
BitMaxz, Thank you so much for your time!
I had contacted bitfily via their sales email about a week ago without a reply.
I sent them another message via Facebook Messenger last night from the link you provided.
My unit was badly damaged by UPS so I had to do some soldering on the NIC and reset switches in order to try what you suggested...
No Luck
I did hear back from the seller (Varispin) finally. He claims to be discussing the repairs with bitfily tech team and will let me know when he has the parts. it looks like the lack of an OS is the primary problem, seems like an easy enough place to start if I were the Manufacturer/ customer service tech...
I will update as relevant
Thank you again
I had contacted bitfily via their sales email about a week ago without a reply.
I sent them another message via Facebook Messenger last night from the link you provided.
My unit was badly damaged by UPS so I had to do some soldering on the NIC and reset switches in order to try what you suggested...
No Luck
I did hear back from the seller (Varispin) finally. He claims to be discussing the repairs with bitfily tech team and will let me know when he has the parts. it looks like the lack of an OS is the primary problem, seems like an easy enough place to start if I were the Manufacturer/ customer service tech...
I will update as relevant
Thank you again
UPDATE:
I decided to give up on Bitfily support and since this unit bears a striking resemblance to the BitFury B8, I went to their website and easily found their software here:
https://dl.bitfury.com/support/bitfury B8/
or
https://dl.bitfury.com/Support/Bitfury%20B8/
The above link also includes a quickstart guide for the initial setup.
As expected, Bitfily is a chinese knockoff company who has stolen Bitfury's design and sold it as their own.
Supposedly there is a new firmware coming for these units that bumps up the hashrate to 68TH/s but I will believe it when I see it.
I am currently running at 52TH/s @ 61C so this might offset some heating costs over the winter
September 13, 2019, 05:15:11 PM
Had a similar problem as the OP. My unit (Bitfily Snow Panther A1+) was brand new and would not draw an IP. I slid the SD card from the OrangePi Zero into my PC and it was blank! Anyone have a copy of the OS they can link to?? that might get this POS to work...
Try this one below.
Did you try to reset them through IP reporter or reset button under the control board near ethernet socket? It looks s9 miner that is why I suggest you try the reset procedure by holding IP/reset for 20 sec while the miner is running for 5 minutes.
If it doesn't work try to contact them.
I can't access their website it looks offline or expired domain but I found their contact info you can check the list below.
- [email protected]
- https://twitter.com/bitfily
- https://www.facebook.com/Bitfily-1876721115733476/
- https://www.linkedin.com/company/bitfily/
- WhatsApp: +8618948352320
If it doesn't work try to contact them.
I can't access their website it looks offline or expired domain but I found their contact info you can check the list below.
- [email protected]
- https://twitter.com/bitfily
- https://www.facebook.com/Bitfily-1876721115733476/
- https://www.linkedin.com/company/bitfily/
- WhatsApp: +8618948352320
If you can't still scan the IP with angry IP as suggested above you must contact the bitfily support the list of contacts are listed on the quoted post above.
For OS, I can't find any OS under their website it seems they don't share it publicly much better contact the support you can use the links above to contact them and ask for the OS.
September 13, 2019, 01:17:18 PM
Had a similar problem as the OP. My unit (Bitfily Snow Panther A1+) was brand new and would not draw an IP. I slid the SD card from the OrangePi Zero into my PC and it was blank! Anyone have a copy of the OS they can link to?? that might get this POS to work...
May 25, 2019, 08:41:58 AM
if u look at the behind the a1 u see tiny board with blue light from time to time it get dusty u need to remove it and replace it again for this fix the no internet and red light problem
February 13, 2019, 03:08:01 PM
just google this key word "ip-scanner" , there are many free tools that will tell you the ip address of all connected devices , there will also be a name representing the device in most cases.
once you know the IP , simply type it in a browser to access your miner.
once you know the IP , simply type it in a browser to access your miner.
February 13, 2019, 02:14:52 PM
Go to your router's web configuration page. (usually 192.168.1.1)
Can you see it listed in your router's local area network IP address list?
Can you see it listed in your router's local area network IP address list?
February 13, 2019, 10:34:42 AM
Please, help me the Snow Panther Miner A1 but I Not received IP access to the web config. I What to do ??
https://pbs.twimg.com/media/DbIG3qGU0AYOj42.png
https://pbs.twimg.com/media/DbIG3qGU0AYOj42.png
Jump to: