Author

Topic: Poor GPU Utilization with 4850 -- SOLVED (Read 1423 times)

newbie
Activity: 56
Merit: 0
April 13, 2011, 08:19:54 AM
#5
Is there a way to monitor how much wattage your PC is consuming without something you plug in your socket?

You need to have some kind of measurement tool inline with the power plug going into your computer.  You can guess how much your computer brings down based on manufacturer specs, but you'll never really know until you measure it.
newbie
Activity: 19
Merit: 0
April 13, 2011, 07:01:13 AM
#4
Is there a way to monitor how much wattage your PC is consuming without something you plug in your socket?
legendary
Activity: 1284
Merit: 1001
April 12, 2011, 04:13:28 PM
#3
I think most people don't check wattage use at all, they just assume that because they are using a GPU it will be profitable. A lot of people with old ATI cards and pretty much any Nvidia card are probably paying more for the bitcoins by mining than they would if they bought them.
full member
Activity: 120
Merit: 100
April 12, 2011, 03:42:49 PM
#2
I was losing money running my 4870 as a GPU miner, as it cost more in power to run it than it generated in BTC, so do your maths unless you like throwing money away. Too many people only count the wattage of the card, forgetting that you have to pay to run the PC as well. I have a power thing on the plug socket, so I can see how much power the PC is using.
newbie
Activity: 6
Merit: 0
April 11, 2011, 01:23:56 AM
#1
I've got a somewhat older GPU lying around that I decided to set up for mining purposes, as where its located I pay an all-you-can-eat electricity plan. Its running Win7 x64, ati stream v2.2, and poclbm but I never see it use more than 1% utilization on the GPU and its only going at 990khash/s max.

The card is currently running default speeds, latest Catalyst drivers, and nothing but Aero using the GPU at the moment.

Any ideas why its not using the GPU more?

EDIT:
I found out that it was reading my CPU as device 0 and my GPU as device 1. The guide I followed told me to set the device to device 0.
Jump to: