You can use this comands on the wrt54gs to change the status of the
security led:
root@DD-WRT:~# gpio enable 5 #(SECURITY LED - off - green)
root@DD-WRT:~# gpio disable 5 #(SECURITY LED - on - green)
root@DD-WRT:~# gpio disable 3 #(SECURITY LED - on - amber)
root@DD-WRT:~# gpio enable 3 #(SECURITY LED - off - amber)
just a little soldering install a relay in the router and connect it 2 your reset
Science
Topic: Possible? Write a DD-WRT script to short two pins momentarily, to reset PC (Read 4640 times)
February 09, 2012, 11:49:47 AM
February 08, 2012, 03:07:48 AM
get a USB ddwrt router and using IRDA or bluetooth to activeate something that could short the motherboard pins. Don't ask me how but I do know theres an infrared transmitter program i believe you can use through ssh.
February 07, 2012, 03:10:41 PM
Quote
Automation; it would be cool the get home and from your android device "touch" a button that will open your gate, give you illumination, turn on your TV or radio on your favorite station and power up your system, just to find yourself wasting time in front of the PC 30 seconds later..
I dont want to have to touch any button! I want bluetooth or NFC to unlock the front door for me.
I never understood that. Just about every car built in the last decade has at least remote control central locking, and I have yet to see a private house front door that opens with anything other than a key. Seriously.. think about it. 5+ years ago I had a keyless go system in my car so I didnt even have to press a button to open the doors. Just be close to it. Why isnt that a standard feature on houses ?
February 07, 2012, 03:06:40 PM
Get yourselves one of these,
http://www.microchipdirect.com/productsearch.aspx?Keywords=DM320004
It has ~100 GPIO pins that you can program to do anything you want, and can be used to host a little web control panel. You need to know a little C code, but theres a bunch of demo code and its mostly copy/paste.
http://www.microchipdirect.com/productsearch.aspx?Keywords=DM320004
It has ~100 GPIO pins that you can program to do anything you want, and can be used to host a little web control panel. You need to know a little C code, but theres a bunch of demo code and its mostly copy/paste.
February 07, 2012, 02:55:14 PM
I love all the DIY ideas, but just so you know, you can buy devices that do this. Something like this:
http://www.digidave.co.uk/jshop/product.php?xProd=211
http://www.digidave.co.uk/jshop/product.php?xProd=211
I saw that one and many similar devices, but where's the joy in that
?Those devices are always about 100$ too expensive, as I'm not building a datacenter.
If I was to run a professional mining operation, or whatever professional of course I would install some professional power controller.
I do maintain a network where i have few racked servers, along with some intelligent/ip managed Rittal power strips, this one exactly http://www.rittal-corp.com/products/product_details.cfm?n1Id=2&n2Id=46&n3Id=153&cId=&pn=9970752 . This are great, but too expensive and an overkill for my needs right now.
Automation; it would be cool the get home and from your android device "touch" a button that will open your gate, give you illumination, turn on your TV or radio on your favorite station and power up your system, just to find yourself wasting time in front of the PC 30 seconds later..
February 07, 2012, 08:22:00 AM
I love all the DIY ideas, but just so you know, you can buy devices that do this. Something like this:
http://www.digidave.co.uk/jshop/product.php?xProd=211
http://www.digidave.co.uk/jshop/product.php?xProd=211
I saw that one and many similar devices, but where's the joy in that
?Those devices are always about 100$ too expensive, as I'm not building a datacenter.
If I was to run a professional mining operation, or whatever professional of course I would install some professional power controller.
I do maintain a network where i have few racked servers, along with some intelligent/ip managed Rittal power strips, this one exactly http://www.rittal-corp.com/products/product_details.cfm?n1Id=2&n2Id=46&n3Id=153&cId=&pn=9970752 . This are great, but too expensive and an overkill for my needs right now.
February 07, 2012, 02:15:42 AM
I love all the DIY ideas, but just so you know, you can buy devices that do this. Something like this:
http://www.digidave.co.uk/jshop/product.php?xProd=211
http://www.digidave.co.uk/jshop/product.php?xProd=211
February 07, 2012, 01:55:07 AM
I read a story about someone who set up a computer to eject its cd rom drive whenever another computer stopped responding to pings. The drive was aimed so that when it ejected it hit the reboot button on the computer that was freezing.
I did this too...I've got the idea when I saw something similar on hackaday, they've used the same cdrom eject trick to open an electronic door door...even more epic IMHO
...I have a small form factor desktop which is acting as a supervisor for my other pc army. It had a dusty 3.5" floppy drive taking up space. Not anymore.
I've took a piece of wood plank, and formatted it to the floppy size, but a tad longer, drilled the bolt holes, adding two more holes in front so i can bolt another piece of wood, where i've attached a spare reset button that i've scrapped from a old pc chasis, showed the contraption into now free floppy drive bay, and connected the reset button using some cat5 cable and connector to the reset pins on the main board. The piece of wood holding the reset button is positioned in front of a cd tray, so when it opens, it presses the reset button, the mainboard gets it's reset signal and reboots. I can remove the reset button and the piece of wood holding the reset button, if I have a need for a cd, but who's using cd's anymore?
January 28, 2012, 12:53:03 AM
I read a story about someone who set up a computer to eject its cd rom drive whenever another computer stopped responding to pings. The drive was aimed so that when it ejected it hit the reboot button on the computer that was freezing.
Epicness really..
January 28, 2012, 12:37:06 AM
I read a story about someone who set up a computer to eject its cd rom drive whenever another computer stopped responding to pings. The drive was aimed so that when it ejected it hit the reboot button on the computer that was freezing.
Epicness really..
January 27, 2012, 09:21:14 PM
I read a story about someone who set up a computer to eject its cd rom drive whenever another computer stopped responding to pings. The drive was aimed so that when it ejected it hit the reboot button on the computer that was freezing.
January 24, 2012, 09:13:21 PM
Have you tried a different BIOS version?
What about Wake on LAN? Does that work on you're motherboard? That's what I use and DD-WRT has it built in. That will definitely allow you to turn your rig back on after an outage.
Cool. I never figured out WOL, cause the last few times I tried it never work. But that was not using dd-wrt though. Will try.What about Wake on LAN? Does that work on you're motherboard? That's what I use and DD-WRT has it built in. That will definitely allow you to turn your rig back on after an outage.
Might have to upgrade the BIOS, but i doubt it ever gets addressed, as 99% of people don't use that function at all.
But thanks though. The only problem left now is if it ever gets a hard lockup... then i am screwed.
WOL functionality is paramount to kiosk type system deployments. It's very commonly used.
January 19, 2012, 08:41:07 PM
whether you can solve this or not depends on your router. some of them have GPIO pins that can be triggered using the proc/gpio interface.
Others can control their status LEDs(or they already are triggered by a gpio), which allows you to abuse those contacts as "switches" for power and reset, at the cost of losing the status led functionality.
However, a simple BC880 transistor(0.15€) hooked to the two LED pins will allow you to short the Reset/power lines.
This ofc is indeed easily scriptable. however as long as you can ssh into your pc from the outside, you wont need a script, because triggering an LED/GPIO is just a oneliner. an alias will do that trick.
Others can control their status LEDs(or they already are triggered by a gpio), which allows you to abuse those contacts as "switches" for power and reset, at the cost of losing the status led functionality.
However, a simple BC880 transistor(0.15€) hooked to the two LED pins will allow you to short the Reset/power lines.
This ofc is indeed easily scriptable. however as long as you can ssh into your pc from the outside, you wont need a script, because triggering an LED/GPIO is just a oneliner. an alias will do that trick.
January 19, 2012, 08:24:27 PM
I had this same issue when I first got setup. I would have lockups where the computer is technically on but unresponsive. It would take a physical shutdown to clear it up. So I made an arduino resetter hooked to transistors which shorted the pins on the power/reset switch, then I wrote a GUI that was intended to run on a "monitor" machine that was not mining. The GUI had buttons to reset/power down with an indicator that changed when the power was on/off. Then I could just log into Teamviewer and do the physical reset.
By the time I got it all done I didn't need it anymore. I got all my heat/overclock issues stabilized and it never needs shutting down. Aside from one power outage my miners have been running 3-4 months solid. I decided it was not worth the small amount of hashrate increase if I had to go reset the thing all the time.
I run 5x Sapphire 5830's in one machine for around 1.5Gh/s.
By the time I got it all done I didn't need it anymore. I got all my heat/overclock issues stabilized and it never needs shutting down. Aside from one power outage my miners have been running 3-4 months solid. I decided it was not worth the small amount of hashrate increase if I had to go reset the thing all the time.
I run 5x Sapphire 5830's in one machine for around 1.5Gh/s.
January 19, 2012, 08:04:47 PM
Have you tried a different BIOS version?
What about Wake on LAN? Does that work on you're motherboard? That's what I use and DD-WRT has it built in. That will definitely allow you to turn your rig back on after an outage.
Cool. I never figured out WOL, cause the last few times I tried it never work. But that was not using dd-wrt though. Will try.What about Wake on LAN? Does that work on you're motherboard? That's what I use and DD-WRT has it built in. That will definitely allow you to turn your rig back on after an outage.
Might have to upgrade the BIOS, but i doubt it ever gets addressed, as 99% of people don't use that function at all.
But thanks though. The only problem left now is if it ever gets a hard lockup... then i am screwed.
January 19, 2012, 07:55:22 PM
Have you tried a different BIOS version?
First you said it hard freezes, now it's outages. two entirely different problems. If it's hard freezing, it's not stable.
Why wouldn't wake on lan work if it's a complete power outage? The computer would be off no?
First you said it hard freezes, now it's outages. two entirely different problems. If it's hard freezing, it's not stable.
Why wouldn't wake on lan work if it's a complete power outage? The computer would be off no?
January 19, 2012, 07:54:33 PM
That is just an extender for the buttons and power LED from the motherboard to let's say another room (ie; you don't have to walk your lazy but from one room to another just to reboot it or shut it down or see the power LED). It works end-to-end off a cat5 cable. That is in no way intended to plug into a networking device.
Interesting concept, but how would a router physically short two pins?
I think the ideal solution is to stabilize you're rig. I like you're creativity though.
By sending out signal on two pins at once, making the mobo think it is shorted. I have no idea how much current is needed.Interesting concept, but how would a router physically short two pins?
I think the ideal solution is to stabilize you're rig. I like you're creativity though.
I didn't come up with the idea, someone else on this forum did.
well, the rigs are stable, but power outages are out of my control.
I have one of the mobos where the "state after power loss" don't work as expected. Really sucks.
January 19, 2012, 07:47:05 PM
That is just an extender for the buttons and power LED from the motherboard to let's say another room (ie; you don't have to walk your lazy but from one room to another just to reboot it or shut it down or see the power LED). It works end-to-end off a cat5 cable. That is in no way intended to plug into a networking device.
Interesting concept, but how would a router physically short two pins?
I think the ideal solution is to stabilize you're rig. I like you're creativity though.
Interesting concept, but how would a router physically short two pins?
I think the ideal solution is to stabilize you're rig. I like you're creativity though.
January 19, 2012, 02:48:56 PM
Problem: How to remotely reset a PC after it hard freezes. Wake on LAN wouldn't work, as the PC is still ON. You can't SSH into it because the PC is hung.
http://cablesaurus.com/index.php?main_page=product_info&cPath=15&products_id=43&zenid=d4is8uqptar3lu4p2eqisiqu83
This item allows one to connect a Cat5 cable to the power and reset switch. The cat5 cable is only used to relay the signal when a user presses the power or reset button on the other end.
If we connect the cat5 cable to a DD-WRT router and write a script to short two pins of the cat5 cable momentarily, we can remotely reboot the PC.
Is this even possible? If yes, would someone be interested in writing a script? I am willing to donate some money.
http://cablesaurus.com/index.php?main_page=product_info&cPath=15&products_id=43&zenid=d4is8uqptar3lu4p2eqisiqu83
This item allows one to connect a Cat5 cable to the power and reset switch. The cat5 cable is only used to relay the signal when a user presses the power or reset button on the other end.
If we connect the cat5 cable to a DD-WRT router and write a script to short two pins of the cat5 cable momentarily, we can remotely reboot the PC.
Is this even possible? If yes, would someone be interested in writing a script? I am willing to donate some money.
Jump to: