Topic: Power Antminer S7 with 3 PSUs: Is that possible? (Read 100 times)
Yes you can use 3 PSUs if you want. Just make sure the PSU powering the controller is turned on last or you wont see all 3 boards.
Ups...they should write it more clearly..
https://www.evga.com/Products/Specs/PSU.aspx?pn=e7a4ca30-cc2f-4769-b8ac-4293f30e7820
I thought the 2 columns stands for 2 different rails...
In this case, you can mod the EPS Plug....
https://www.evga.com/Products/Specs/PSU.aspx?pn=e7a4ca30-cc2f-4769-b8ac-4293f30e7820
I thought the 2 columns stands for 2 different rails...
In this case, you can mod the EPS Plug....
Not really...
1st you only have 2 PCIE plugs..one PCIE plug can handle only 150Watts....
2nd the PSU has 2 12V rails not one.
1st you only have 2 PCIE plugs..one PCIE plug can handle only 150Watts....
2nd the PSU has 2 12V rails not one.
You are wrong the EVGA has ONE 12v rail but thats irrelevant as the psu has not got enough connectors and would require adaptors which are just not worth the risk really.
Not really...
1st you only have 2 PCIE plugs..one PCIE plug can handle only 150Watts....
2nd the PSU has 2 12V rails not one.
1st you only have 2 PCIE plugs..one PCIE plug can handle only 150Watts....
2nd the PSU has 2 12V rails not one.
I have 3x EVGA 600 Bronze PSUs.
Can I power an Antminer S7 safely with them (1 PSU per board)?
Thanks!
Can I power an Antminer S7 safely with them (1 PSU per board)?
Thanks!
Jump to: