Topic: Power usage - dual mining ETH/DCR (Read 986 times)
You can reduce your fan speed to save some watts, no need to run the fans at 100% constantly. I see a GPU at 58c and still at 100% fan speed. That is overkill.
is it my imagination or are a couple of your cards running hot?
Not so bad .
The 850 has a review on jonnyguru.com
It does 82% to 84 %
So what is it running on the setup?
If it runs the mobo and the CPU it is not using much power.
But if it is doing that and a gpu it is using maybe 300 of the 1180 watts.
Which means a loss of 30 watts.
Please tell me if I'm getting good efficiency:
I'm using two PSU's, one is titanium and one is just "80plus" (Corsair ax1200i , old Corsair tx850w)
four 480's, two 470's
I'm getting these speeds with 1180W at the wall:
is that decent or do I need to swap out that old PSU?
I'm using two PSU's, one is titanium and one is just "80plus" (Corsair ax1200i , old Corsair tx850w)
four 480's, two 470's
I'm getting these speeds with 1180W at the wall:
is that decent or do I need to swap out that old PSU?
Jump to: