problem Configuration Dragonmint t1 | Bitcointalksearch.org

Artemis3

legendary

Activity: 2030

Merit: 1573

CLEAN non GPL infringing code made in Rust lang

Quote from: NotFuzzyWarm on April 24, 2019, 11:04:26 AM

Perhaps try to investigate by reading the main T1 thread a little before making wild speculations...

a. Bitmain does not 'make' chips and certainly do not sell them to 3rd parties. BM contracted TSMC to manufacture their chips.
b. The T1 chips were designed for Halong by Innosilicon and made by TSMC. Considering that very shortly after the release of the T1, Inno released their own version (the T2) that uses the same chips it all rather smacks of the kerfuffle in 2014 regarding the 28nm A1 chip that Inno designed for Bitmine.ch
c. As Sidehack as mentioned a while back, yes he is in talks with Inno about the chips.

Of course when i say BM i wasn't implying they manufacture them themselves, and even if they did, it wouldn't change anything. I don't see the point of arguing that. You could also say BM's chips were designed by the guy that left for MicroBT, that Bitmain does nothing but buys everything, but that's beyond the point of this topic.

All i wanted to know is whose chips Halong used, and its Innosillicon's chips, thanks for the answer.

NotFuzzyWarm

legendary

Activity: 3822

Merit: 2703

Evil beware: We have waffles!

Quote from: Artemis3 on April 24, 2019, 10:48:26 AM

So it wasn't that bad eh? Whose chips did they use? ~~Bitmain's?~~ Innosillicon's? Has anyone de-soldered and inspected them? GekkoScience planning something with those?

Perhaps try to investigate by reading the main T1 thread a little before making wild speculations...

a. Bitmain does not 'make' chips and certainly do not sell them to 3rd parties. BM contracted TSMC to manufacture their chips.
b. The T1 chips were designed for Halong by Innosilicon and made by TSMC. Considering that very shortly after the release of the T1, Inno released their own version (the T2) that uses the same chips it all rather smacks of the kerfuffle in 2014 regarding the 28nm A1 chip that Inno designed for Bitmine.ch
c. As Sidehack as mentioned a while back, yes he is in talks with Inno about the chips.

Artemis3

legendary

Activity: 2030

Merit: 1573

CLEAN non GPL infringing code made in Rust lang

Quote from: NotFuzzyWarm on April 23, 2019, 09:34:15 AM

Not surprisingly, following their 'take the money and run' biz plan Halong went out of business at the end of last year and of course ALL of the folks who bought their miners are screwed. Frankly I'm surprised their website is still alive. The only non-scammy and good thing that Halong did was actually deliver the miners before disappearing.

So it wasn't that bad eh? Whose chips did they use? ~~Bitmain's?~~ Innosillicon's? Has anyone de-soldered and inspected them? GekkoScience planning something with those?

Quote from: BitMaxz on April 23, 2019, 10:25:47 AM

So, I guess the only solution to his problem is to flash the miner through SD card with Braiin OS

@maxomid If ever you need the Braiin OS you can find them from here https://bitcointalksearch.org/topic/braiins-os-braiins-os-custom-asic-firmware-optimize-performance-efficiency-5036844.

At this moment T1 users are observing 14TH/s rate while using Braiins OS, this could be because that's the true hashrate or a Braiins OS miscalculation, they are investigating...

BitMaxz

legendary

Activity: 3472

Merit: 3217

Playbet.io - Crypto Casino and Sportsbook

Owch didn't know that thing I just found their website while trying to search some solution about his problem.

So, I guess the only solution to his problem is to flash the miner through SD card with Braiin OS

@maxomid If ever you need the Braiin OS you can find them from here https://bitcointalksearch.org/topic/braiins-os-braiins-os-custom-asic-firmware-optimize-performance-efficiency-5036844.

NotFuzzyWarm

legendary

Activity: 3822

Merit: 2703

Evil beware: We have waffles!

Quote from: BitMaxz on April 23, 2019, 09:28:00 AM

The screenshot link doesn't work I think better to the screenshot in other image hosting like https://imgur.com

Anyway, If it doesn't work the only solution that I know is to flash the miner through SD card with Braiin OS but let me ask first if the miner still underwarranty?

If it still under warranty much better to contact the support about your issue from here https://halongmining.com/contact-us/ or contact the distributor if where did you bought the miner.

Under warranty? Really? ROLF... ref https://bitcointalksearch.org/topic/m.49806643 and a few pages before that spot.
Not surprisingly, following their 'take the money and run' biz plan Halong went out of business at the end of last year and of course ALL of the folks who bought their miners are screwed. Frankly I'm surprised their website is still alive. The only non-scammy and good thing that Halong did was actually deliver the miners before disappearing.

BitMaxz

legendary

Activity: 3472

Merit: 3217

Playbet.io - Crypto Casino and Sportsbook

Quote from: maxomid on April 23, 2019, 01:05:51 AM

Hello
Thanks for the reply

Yes, I did factory Reset through the webGUI.
Your method also did not work. Hold IP/reset 15 Sec but not hard reset
The miner works fine, but I can not change the pool address! Huh

see screenshot
https://www.photobox.co.uk/my/photo/full?photo_id=501808748665 Embarrassed

The screenshot link doesn't work I think better to the screenshot in other image hosting like https://imgur.com

Anyway, If it doesn't work the only solution that I know is to flash the miner through SD card with Braiin OS but let me ask first if the miner still underwarranty?

If it still under warranty much better to contact the support about your issue from here https://halongmining.com/contact-us/ or contact the distributor if where did you bought the miner.

maxomid

newbie

Activity: 9

Merit: 2

Quote from: BitMaxz on April 22, 2019, 05:42:01 PM

What reset factory did you do? Did you reset it through webGUI?

Try to hard reset the miner using IP/reset button that you can find in the front of the miner.
Here is the image below.

https://i.imgur.com/L5khpR4.png

Hold them for 15 sec. after you run the miner for 5 to 10 minutes you should see that the miner will automatically restart/reboot.

Now, configure it again and try Sigma pool or try kano.is pool and let's see if it works.

Hello
Thanks for the reply

Yes, I did factory Reset through the webGUI.
Your method also did not work. Hold IP/reset 15 Sec but not hard reset
The miner works fine, but I can not change the pool address! Huh

see screenshot
https://www.photobox.co.uk/my/photo/full?photo_id=501808748665 Embarrassed

BitMaxz

legendary

Activity: 3472

Merit: 3217

Playbet.io - Crypto Casino and Sportsbook

What reset factory did you do? Did you reset it through webGUI?

Try to hard reset the miner using IP/reset button that you can find in the front of the miner.
Here is the image below.

Hold them for 15 sec. after you run the miner for 5 to 10 minutes you should see that the miner will automatically restart/reboot.

Now, configure it again and try Sigma pool or try kano.is pool and let's see if it works.

maxomid

newbie

Activity: 9

Merit: 2

hi
I had problem with t1 , I configured it for enter pool , not save and return to default , I tasted some pool but not work , please help me , I did rest factory and update last Version , but not work it Huh

error currently using fixed pool setting

https://www.photobox.co.uk/my/photo/full?photo_id=501806973335

Topic: problem Configuration Dragonmint t1 (Read 364 times)