Problem with Antminer S1 | Bitcointalksearch.org

sapta

staff

Activity: 1718

Merit: 1206

Yield.App

Quote from: Glizlack on June 25, 2014, 07:12:10 PM

First thought is what brand power supply are you using? If your using a cheapo non name brand and even some name brands that could explain your problem. On the back is the psu rated power amps per circuit. I suggest you check that against the power draw of 2 s1's.

Steve

Yep, cheap & non-branded PSU is not recommended for S1. I wasted 2 -non branded- 500W PSUs months ago, then I bought Corsair CX500. Now they run great.

Glizlack

full member

Activity: 182

Merit: 100

First thought is what brand power supply are you using? If your using a cheapo non name brand and even some name brands that could explain your problem. On the back is the psu rated power amps per circuit. I suggest you check that against the power draw of 2 s1's.

Steve

lasmart613

newbie

Activity: 1

Merit: 0

I bought two of them. One of them causes the PSU to shut down if I power up both blades.

I am using a 1000W PSU. It runs the other S1 just fine. If I power up either blade along with the good S1, it shuts down.

I am able to run it in single blade mode, but with no other blades from either miner hooked up or it shuts down.

I don't have a power meter or a DC ammeter that can check it.

Any thoughts?

Topic: Problem with Antminer S1 (Read 742 times)