Topic: Problema con el arranque? (Read 182 times)

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 130816
[    0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 129792 pages, LIFO batch:31
[    0.000000] AM335X ES1.0 (neon )
[    0.000000] PERCPU: Embedded 8 pages/cpu @c0b36000 s9408 r8192 d15168 u32768
[    0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129792
[    0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] allocated 1048576 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 511MB = 511MB total
[    0.000000] Memory: 495532k/495532k available, 28756k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf800000 - 0xbfe00000   (   6 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0612cf0   (6188 kB)
[    0.000000]       .init : 0xc0613000 - 0xc06554c0   ( 266 kB)
[    0.000000]       .data : 0xc0656000 - 0xc06cc020   ( 473 kB)
[    0.000000]        .bss : 0xc06cc020 - 0xc0725e3c   ( 360 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] Total of 128 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000356] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[    0.015409] pid_max: default: 32768 minimum: 301
[    0.015645] Security Framework initialized
[    0.015741] Mount-cache hash table entries: 512
[    0.025664] Initializing cgroup subsys cpuacct
[    0.025695] Initializing cgroup subsys memory
[    0.025758] Initializing cgroup subsys blkio
[    0.025904] CPU: Testing write buffer coherency: ok
[    0.026444] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.026521] Setting up static identity map for 0x8038c820 - 0x8038c86c
[    0.027905] Brought up 1 CPUs
[    0.027930] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[    0.029212] devtmpfs: initialized
[    0.093772] pinctrl core: initialized pinctrl subsystem
[    0.093989] rstctl core: initialized rstctl subsystem
[    0.094483] regulator-dummy: no parameters
[    0.094995] NET: Registered protocol family 16
[    0.095759] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.105557] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.106336] platform 49000000.edma: alias fck already exists
[    0.106368] platform 49000000.edma: alias fck already exists
[    0.106396] platform 49000000.edma: alias fck already exists
[    0.107603] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.107785] OMAP GPIO hardware version 0.1
[    0.109127] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.110451] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.111916] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.112451] of_get_named_gpio_flags exited with status 52
[    0.112481] gpio-rctrl rstctl.3: loaded OK
[    0.117297] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    0.120549] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.122780] cpsw.0: No hwaddr in dt. Using 78:a5:04:cf:9c:eb from efuse
[    0.122861] cpsw.1: No hwaddr in dt. Using 78:a5:04:cf:9c:ed from efuse
[    0.138307] bio: create slab  at 0
[    0.150462] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[    0.150697] of_get_named_gpio_flags: can't parse gpios property
[    0.150912] vmmcsd_fixed: 3300 mV 
[    0.153962] SCSI subsystem initialized
[    0.154448] usbcore: registered new interface driver usbfs
[    0.154581] usbcore: registered new interface driver hub
[    0.154866] usbcore: registered new device driver usb
[    0.156945] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    0.158468] input: tps65217_pwr_but as /devices/ocp.2/44e0b000.i2c/i2c-0/0-0024/input/input0
[    0.160195] DCDC1: at 1500 mV 
[    0.161345] vdd_mpu: 925 <--> 1325 mV at 1325 mV 
[    0.162544] vdd_core: 925 <--> 1150 mV at 1100 mV 
[    0.163644] LDO1: at 1800 mV 
[    0.164775] LDO2: at 3300 mV 
[    0.166708] LDO3: 1800 mV 
[    0.167860] LDO4: at 3300 mV 
[    0.168847] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[    0.169548] omap_i2c 44e0b000.i2c: unable to select pin group
[    0.170342] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
[    0.172668] omap_i2c 4819c000.i2c: unable to select pin group
[    0.172908] media: Linux media interface: v0.10
[    0.173011] Linux video capture interface: v2.00
[    0.173135] pps_core: LinuxPPS API ver. 1 registered
[    0.173151] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[    0.174021] Advanced Linux Sound Architecture Driver Initialized.
[    0.175187] Switching to clocksource gp_timer
[    0.193414] NET: Registered protocol family 2
[    0.194423] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.194565] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
[    0.194727] TCP: Hash tables configured (established 4096 bind 4096)
[    0.194885] TCP: reno registered
[    0.194914] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.194960] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.195376] NET: Registered protocol family 1
[    0.195942] RPC: Registered named UNIX socket transport module.
[    0.195963] RPC: Registered udp transport module.
[    0.195977] RPC: Registered tcp transport module.
[    0.195991] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.196363] Trying to unpack rootfs image as initramfs...
[    2.121590] Freeing initrd memory: 14756K
[    2.122260] CPU PMU: probing PMU on CPU 0
[    2.122292] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    2.122916] omap2_mbox_probe: platform not supported
[    2.126825] VFS: Disk quotas dquot_6.5.2
[    2.127061] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.128331] NFS: Registering the id_resolver key type
[    2.128492] Key type id_resolver registered
[    2.128510] Key type id_legacy registered
[    2.128581] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    2.129037] msgmni has been set to 996
[    2.131807] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    2.131832] io scheduler noop registered
[    2.131848] io scheduler deadline registered
[    2.131901] io scheduler cfq registered (default)
[    2.133706] tps65217-bl tps65217-bl: no platform data provided
[    2.133747] tps65217-bl: probe of tps65217-bl failed with error -22
[    2.134717] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.137343] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[    2.137633] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[    2.855015] console [ttyO0] enabled
[    2.859863] [drm] Initialized drm 1.1.0 20060810
[    2.878507] brd: module loaded
[    2.888789] loop: module loaded
[    2.892243] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    2.899530] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    2.906802] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    2.914068] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    2.921337] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    2.960469] bone-capemgr bone_capemgr.8: bone: scan failed (1 time)
[    3.499532] bone-capemgr bone_capemgr.8: bone: scan failed (2 time)
[    4.038589] bone-capemgr bone_capemgr.8: bone: scan failed (3 time)
[    4.577650] bone-capemgr bone_capemgr.8: bone: scan failed (4 time)
[    5.116712] bone-capemgr bone_capemgr.8: bone: scan failed (5 time)
[    5.655774] bone-capemgr bone_capemgr.8: bone: scan failed (6 time)
[    6.194840] bone-capemgr bone_capemgr.8: bone: scan failed (7 time)
[    6.733899] bone-capemgr bone_capemgr.8: bone: scan failed (8 time)
[    7.272965] bone-capemgr bone_capemgr.8: bone: scan failed (9 time)
[    7.812025] bone-capemgr bone_capemgr.8: bone: scan failed (10 time)
[    8.320006] bone-capemgr bone_capemgr.8: Failed to scan baseboard eeprom
[    8.327075] bone-capemgr: probe of bone_capemgr.8 failed with error -110
[    8.336612] nand_get_flash_type: 00,00 against 00,00
[    8.341904] No NAND device found
[    8.345390] OneNAND driver initializing
[    8.352692] edma-dma-engine edma-dma-engine.0: allocated channel for 0:17
[    8.359989] edma-dma-engine edma-dma-engine.0: allocated channel for 0:16
[    8.370264] edma-dma-engine edma-dma-engine.0: allocated channel for 0:43
[    8.377555] edma-dma-engine edma-dma-engine.0: allocated channel for 0:42
[    8.386794] usbcore: registered new interface driver asix
[    8.392641] usbcore: registered new interface driver cdc_ether
[    8.398920] usbcore: registered new interface driver smsc95xx
[    8.405043] usbcore: registered new interface driver net1080
[    8.411063] usbcore: registered new interface driver cdc_subset
[    8.417351] usbcore: registered new interface driver zaurus
[    8.423410] usbcore: registered new interface driver cdc_ncm
[    8.430122] usbcore: registered new interface driver cdc_acm
[    8.436079] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    8.444457] Initializing USB Mass Storage driver...
[    8.449693] usbcore: registered new interface driver usb-storage
[    8.455995] USB Mass Storage support registered.
[    8.461024] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[    8.467715] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[    8.472954] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    8.481719] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    8.481740] musb-hdrc: MHDRC RTL version 2.0 
[    8.481756] musb-hdrc: setup fifo_mode 4
[    8.481785] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    8.481965] musb-hdrc musb-hdrc.0.auto: *** mode=3
[    8.487003] musb-hdrc musb-hdrc.0.auto: *** power=250
[    8.492988] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[    8.498234] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    8.506996] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    8.507016] musb-hdrc: MHDRC RTL version 2.0 
[    8.507030] musb-hdrc: setup fifo_mode 4
[    8.507053] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    8.507212] musb-hdrc musb-hdrc.1.auto: *** mode=1
[    8.512253] musb-hdrc musb-hdrc.1.auto: *** power=250
[    8.517560] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    8.523936] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[    8.532171] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[    8.532282] usb usb1: default language 0x0409
[    8.532340] usb usb1: udev 1, busnum 1, minor = 0
[    8.532364] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    8.539490] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.547060] usb usb1: Product: MUSB HDRC host driver
[    8.552274] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
[    8.557939] usb usb1: SerialNumber: musb-hdrc.1.auto
[    8.563800] usb usb1: usb_probe_device
[    8.563828] usb usb1: configuration #1 chosen from 1 choice
[    8.563891] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    8.564179] hub 1-0:1.0: usb_probe_interface
[    8.564202] hub 1-0:1.0: usb_probe_interface - got id
[    8.564230] hub 1-0:1.0: USB hub found
[    8.568241] hub 1-0:1.0: 1 port detected
[    8.572378] hub 1-0:1.0: standalone hub
[    8.572398] hub 1-0:1.0: individual port power switching
[    8.572417] hub 1-0:1.0: no over-current protection
[    8.572434] hub 1-0:1.0: Single TT
[    8.572455] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[    8.572475] hub 1-0:1.0: power on to power good time: 10ms
[    8.572519] hub 1-0:1.0: local power source is good
[    8.572624] hub 1-0:1.0: enabling power on all ports
[    8.573792] mousedev: PS/2 mouse device common for all mice
[    8.582003] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[    8.589485] 44e3e000.rtc: already running
[    8.593974] i2c /dev entries driver
[    8.599388] pps_ldisc: PPS line discipline registered
[    8.604848] Driver for 1-wire Dallas network protocol.
[    8.612115] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    8.619677] cpuidle: using governor ladder
[    8.623999] cpuidle: using governor menu
[    8.628589] of_get_named_gpio_flags exited with status 6
[    8.628609] of_get_named_gpio_flags: can't parse gpios property
[    8.628625] of_get_named_gpio_flags: can't parse gpios property
[    8.628663] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[    8.635879] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[    8.642678] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[    8.649912] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[    8.657242] mmc.4 supply vmmc_aux not found, using dummy regulator
[    8.664181] omap_hsmmc mmc.4: pins are not configured from the driver
[    8.673478] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[    8.697398] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.7
[    8.709118] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.7) status -22
[    8.716417] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
[    8.725446] leds-gpio gpio-leds.7: pins are not configured from the driver
[    8.732685] of_get_named_gpio_flags exited with status 53
[    8.732709] of_get_named_gpio_flags exited with status 54
[    8.732732] of_get_named_gpio_flags exited with status 55
[    8.732752] of_get_named_gpio_flags exited with status 56
[    8.732788] of_get_named_gpio_flags exited with status 53
[    8.733083] of_get_named_gpio_flags exited with status 54
[    8.733295] of_get_named_gpio_flags exited with status 55
[    8.733485] of_get_named_gpio_flags exited with status 56
[    8.734095] ledtrig-cpu: registered to indicate activity on CPUs
[    8.740891] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[    8.748134] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[    8.756615] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[    8.762928] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[    8.770173] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[    8.782525] usbcore: registered new interface driver usbhid
[    8.788453] usbhid: USB HID core driver
[    8.795652] TCP: cubic registered
[    8.799202] Initializing XFRM netlink socket
[    8.803751] NET: Registered protocol family 17
[    8.808567] NET: Registered protocol family 15
[    8.813470] Key type dns_resolver registered
[    8.818134] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    8.826285] ThumbEE CPU extension supported.
[    8.830828] Registering SWP/SWPB emulation handler
[    8.836925] registered taskstats version 1
[    8.860585] mmc0: host does not support reading read-only switch. assuming write-enable.
[    8.871126] mmc0: new high speed SDHC card at address 1234
[    8.877717] mmcblk0: mmc0:1234 SA04G 3.63 GiB 
[    8.885217]  mmcblk0: p1 p2 p3
[    8.892125] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    8.898538] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    8.912883] libphy: 4a101000.mdio: probed
[    8.917178] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    8.927048] Detected MACID = 78:a5:04:cf:9c:eb
[    8.931737] cpsw 4a100000.ethernet: NAPI disabled
[    8.938419] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    8.954719] ALSA device list:
[    8.957852]   No soundcards found.
[    8.962051] Freeing init memory: 264K
[    8.965971] Failed to execute /init
[    9.195712] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[    9.242803] compile Apr 14 2015--09:34:39
[    9.247112] CM_PER_SPI1_CLKCTRL 0x10002
[    9.251145] spi_vaddr 0xfa1a0000
[    9.254525] version 0x40300a0b
[    9.257720] OMAP2_MCSPI_SYSSTATUS 0x1
[    9.261552] OMAP2_MCSPI_MODULCTRL 0x1
[    9.265379] OMAP2_MCSPI_CHCONF0 0x180103c5
[    9.269719] Initial OMAP2_MCSPI_IRQSTATUS{0x0}OMAP2_MCSPI_IRQENABLE{0x0}
[    9.276858] hash ok
[    9.279075] hashtest OK
[    9.281882] bitmain-asic: success to register device
[    9.291482] Detect hardware version = 1
[    9.295614] fix hardware version
[    9.299000] hardware_version = 0x1
[    9.302777] pwm_percent{20}
[    9.305924] bitmain_asic_open ok
[   10.769040] pwm_percent{20}
[   10.771990] timeout {0x1b57}
[   10.775008] rev timeout {0x571b0080}
[   10.778821] set_baud cmd_buf[0]{0x86}cmd_buf[1]{0x10}cmd_buf[2]{0x1a}cmd_buf[3]{0x17}
[   10.787002] send BC data:
[   10.787002] 0x0000: 0x03 0x00 0x00 0x00 0x86 0x10 0x1a 0x17 
[   10.796366] send BC data:
[   10.796366] 0x0000: 0x03 0x01 0x00 0x00 0x86 0x10 0x1a 0x17 
[   10.806137] send BC data:
[   10.806137] 0x0000: 0x03 0x02 0x00 0x00 0x86 0x10 0x1a 0x17 
[   10.815902] send BC data:
[   10.815902] 0x0000: 0x03 0x03 0x00 0x00 0x86 0x10 0x1a 0x17 
[   10.935047] set_voltage cmd_buf[0]{0xaa}cmd_buf[1]{0xb7}cmd_buf[2]{0x25}cmd_buf[3]{0xcd}
[   10.943511] send BC data:
[   10.943511] 0x0000: 0x03 0x00 0x00 0x1a 0xaa 0xb7 0x25 0xcd 
[   10.954573] send BC data:
[   10.954573] 0x0000: 0x03 0x01 0x00 0x1a 0xaa 0xb7 0x25 0xcd 
[   10.964339] send BC data:
[   10.964339] 0x0000: 0x03 0x02 0x00 0x1a 0xaa 0xb7 0x25 0xcd 
[   10.976069] send BC data:
[   10.976069] 0x0000: 0x03 0x03 0x00 0x1a 0xaa 0xb7 0x25 0xcd 
[   11.095203] bitmain_asic_close
[   11.918655] net eth0: initializing cpsw version 1.12 (0)
[   11.926512] net eth0: phy found : id is : 0x7c0f1
[   11.931498] libphy: PHY 4a101000.mdio:01 not found
[   11.936526] net eth0: phy 4a101000.mdio:01 not found on slave 1
[   15.001935] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
[   32.212774] bitmain-asic: success to unregister device
[   33.234606] compile Apr 14 2015--09:34:39
[   33.238896] CM_PER_SPI1_CLKCTRL 0x2
[   33.242571] spi_vaddr 0xfa1a0000
[   33.245948] version 0x40300a0b
[   33.249144] OMAP2_MCSPI_SYSSTATUS 0x1
[   33.252972] OMAP2_MCSPI_MODULCTRL 0x1
[   33.256800] OMAP2_MCSPI_CHCONF0 0x180103c5
[   33.261136] Initial OMAP2_MCSPI_IRQSTATUS{0x0}OMAP2_MCSPI_IRQENABLE{0x0}
[   33.268264] hash ok
[   33.270486] hashtest OK
[   33.273272] bitmain-asic: success to register device
[   33.402614] Detect hardware version = 1
[   33.406696] fix hardware version
[   33.410079] hardware_version = 0x1
[   33.417855] pwm_percent{20}
[   33.425418] bitmain_asic_open ok
[   33.445790] Detect device
[   33.450990] reset hash asic
[   33.453959] clear FPGA nonce buffer
[   33.605646] bitmain_lcd: module license 'unspecified' taints kernel.
[   33.612373] Disabling lock debugging due to kernel taint
[   33.636370] kthread ok
[   33.638970] ************ S4 nand board ***************
[   33.644363] fix hardware version{1}
[   34.458564] reset hash asic
[   34.461510] clear FPGA nonce buffer
[   35.563964] clear FPGA nonce buffer
[   35.567775] get chain0 reg0x0
[   35.570889] send BC data:
[   35.570889] 0x0000: 0x03 0x00 0x00 0x1a 0x84 0x00 0x00 0x11 
[   35.677303] asic cmd return 00908213
[   35.681043] asic cmd return 04908213
[   35.684786] asic cmd return 08908213
[   35.688530] asic cmd return 0c908213
[   35.692277] asic cmd return 10908213
[   35.696088] asic cmd return 14908213
[   35.699838] asic cmd return 18908213
[   35.703584] asic cmd return 1c908213
[   35.707329] asic cmd return 20908213
[   35.711072] asic cmd return 24908213
[   35.714883] asic cmd return 28908213
[   35.718629] asic cmd return 2c908213
[   35.722376] asic cmd return 30908213
[   35.726116] asic cmd return 34908213
[   35.729863] asic cmd return 38908213
[   35.733681] asic cmd return 3c908213
[   35.737434] asic cmd return 40908213
[   35.741184] asic cmd return 44908213
[   35.744927] asic cmd return 48908213
[   35.748665] asic cmd return 4c908213
[   35.752479] asic cmd return 50908213
[   35.756221] asic cmd return 54908213
[   35.760070] asic cmd return 58908213
[   35.763820] asic cmd return 5c908213
[   35.767570] asic cmd return 64908213
[   35.771780] asic cmd return 68908213
[   35.775550] asic cmd return 6c908213
[   35.779290] asic cmd return 70908213
[   35.783035] asic cmd return 74908213
[   35.786772] asic cmd return 78908213
[   35.790600] asic cmd return 7c908213
[   35.794357] asic cmd return 80908213
[   35.798107] asic cmd return 84908213
[   35.801851] asic cmd return 88908213
[   35.805589] asic cmd return 8c908213
[   35.809409] asic cmd return 90908213
[   35.813165] asic cmd return 94908213
[   35.816908] asic cmd return 98908213
[   35.820651] asic cmd return 9c908213
[   35.824464] chain0 total asic:39
[   35.827850] pos0--addr:00
[   35.830599] pos1--addr:04
[   35.833342] pos2--addr:08
[   35.836105] pos3--addr:0c
[   35.838853] pos4--addr:10
[   35.841602] pos5--addr:14
[   35.844350] pos6--addr:18
[   35.847089] pos7--addr:1c
[   35.849832] pos8--addr:20
[   35.852573] pos9--addr:24
[   35.855321] pos10--addr:28
[   35.858154] pos11--addr:2c
[   35.860989] pos12--addr:30
[   35.863823] pos13--addr:34
[   35.866667] pos14--addr:38
[   35.869501] pos15--addr:3c
[   35.872333] pos16--addr:40
[   35.875171] pos17--addr:44
[   35.878004] pos18--addr:48
[   35.880839] pos19--addr:4c
[   35.883674] pos20--addr:50
[   35.886509] pos21--addr:54
[   35.889342] pos22--addr:58
[   35.892182] pos23--addr:5c
[   35.895017] pos24--addr:64
[   35.897847] pos25--addr:68
[   35.900684] pos26--addr:6c
[   35.903522] pos27--addr:70
[   35.906364] pos28--addr:74
[   35.909201] pos29--addr:78
[   35.912031] pos30--addr:7c
[   35.914868] pos31--addr:80
[   35.917705] pos32--addr:84
[   35.920540] pos33--addr:88
[   35.923370] pos34--addr:8c
[   35.926203] pos35--addr:90
[   35.929035] pos36--addr:94
[   35.931875] pos37--addr:98
[   35.934705] pos38--addr:9c
[   35.937548] chain0_asic_exist{0xfeffffff}
[   35.941752] clear FPGA nonce buffer
[   35.946468] get chain1 reg0x0
[   35.949601] send BC data:
[   35.949601] 0x0000: 0x03 0x01 0x00 0x1a 0x84 0x00 0x00 0x11 
[   36.056218] asic cmd return 00908213
[   36.059989] asic cmd return 04908213
[   36.063742] asic cmd return 08908213
[   36.067480] asic cmd return 0c908213
[   36.071225] asic cmd return 10908213
[   36.075142] asic cmd return 14908213
[   36.078896] asic cmd return 18908213
[   36.082636] asic cmd return 1c908213
[   36.086376] asic cmd return 20908213
[   36.090125] asic cmd return 24908213
[   36.093957] asic cmd return 28908213
[   36.097707] asic cmd return 2c908213
[   36.101453] asic cmd return 30908213
[   36.105195] asic cmd return 34908213
[   36.108947] asic cmd return 38908213
[   36.112746] asic cmd return 3c908213
[   36.116491] asic cmd return 40908213
[   36.120232] asic cmd return 44908213
[   36.123970] asic cmd return 48908213
[   36.127723] asic cmd return 4c908213
[   36.131524] asic cmd return 50908213
[   36.135263] asic cmd return 54908213
[   36.138999] asic cmd return 58908213
[   36.142746] asic cmd return 5c908213
[   36.146489] asic cmd return 60908213
[   36.150300] asic cmd return 64908213
[   36.154039] asic cmd return 68908213
[   36.157778] asic cmd return 6c908213
[   36.161519] asic cmd return 70908213
[   36.165264] asic cmd return 74908213
[   36.169146] asic cmd return 78908213
[   36.172894] asic cmd return 7c908213
[   36.176637] asic cmd return 80908213
[   36.180382] asic cmd return 84908213
[   36.184120] asic cmd return 88908213
[   36.187940] asic cmd return 8c908213
[   36.191688] asic cmd return 90908213
[   36.195429] asic cmd return 94908213
[   36.199181] asic cmd return 98908213
[   36.202924] asic cmd return 9c908213
[   36.206737] chain1 total asic:40
[   36.210122] pos0--addr:00
[   36.212868] pos1--addr:04
[   36.215611] pos2--addr:08
[   36.218354] pos3--addr:0c
[   36.221103] pos4--addr:10
[   36.223848] pos5--addr:14
[   36.226601] pos6--addr:18
[   36.229345] pos7--addr:1c
[   36.232094] pos8--addr:20
[   36.234843] pos9--addr:24
[   36.237586] pos10--addr:28
[   36.240425] pos11--addr:2c
[   36.243261] pos12--addr:30
[   36.246100] pos13--addr:34
[   36.248946] pos14--addr:38
[   36.251787] pos15--addr:3c
[   36.254620] pos16--addr:40
[   36.257460] pos17--addr:44
[   36.260296] pos18--addr:48
[   36.263135] pos19--addr:4c
[   36.265973] pos20--addr:50
[   36.268809] pos21--addr:54
[   36.271642] pos22--addr:58
[   36.274477] pos23--addr:5c
[   36.277314] pos24--addr:60
[   36.280150] pos25--addr:64
[   36.282989] pos26--addr:68
[   36.285832] pos27--addr:6c
[   36.288668] pos28--addr:70
[   36.291512] pos29--addr:74
[   36.294350] pos30--addr:78
[   36.297186] pos31--addr:7c
[   36.300025] pos32--addr:80
[   36.302864] pos33--addr:84
[   36.305707] pos34--addr:88
[   36.308548] pos35--addr:8c
[   36.311383] pos36--addr:90
[   36.314221] pos37--addr:94
[   36.317059] pos38--addr:98
[   36.319893] pos39--addr:9c
[   36.322730] chain1_asic_exist{0xffffffff}
[   36.326929] clear FPGA nonce buffer
[   36.330720] get chain2 reg0x0
[   36.333833] send BC data:
[   36.333833] 0x0000: 0x03 0x02 0x00 0x1a 0x84 0x00 0x00 0x11 
[   36.439025] asic cmd return 00908213
[   36.442780] asic cmd return 04908213
[   36.446523] asic cmd return 08908213
[   36.450274] asic cmd return 0c908213
[   36.454024] asic cmd return 10908213
[   36.457827] asic cmd return 14908213
[   36.461577] asic cmd return 18908213
[   36.465328] asic cmd return 1c908213
[   36.469073] asic cmd return 20908213
[   36.472812] asic cmd return 24908213
[   36.476612] asic cmd return 28908213
[   36.480354] asic cmd return 2c908213
[   36.484104] asic cmd return 30908213
[   36.487859] asic cmd return 34908213
[   36.491599] asic cmd return 38908213
[   36.495408] asic cmd return 3c908213
[   36.499154] asic cmd return 40908213
[   36.502903] asic cmd return 44908213
[   36.506649] asic cmd return 48908213
[   36.510393] asic cmd return 4c908213
[   36.514197] asic cmd return 50908213
[   36.517942] asic cmd return 54908213
[   36.521689] asic cmd return 58908213
[   36.525437] asic cmd return 5c908213
[   36.529177] asic cmd return 60908213
[   36.532977] asic cmd return 64908213
[   36.536726] asic cmd return 68908213
[   36.540471] asic cmd return 6c908213
[   36.544219] asic cmd return 70908213
[   36.547961] asic cmd return 74908213
[   36.551780] asic cmd return 78908213
[   36.555532] asic cmd return 7c908213
[   36.559276] asic cmd return 80908213
[   36.563016] asic cmd return 84908213
[   36.566756] asic cmd return 88908213
[   36.570564] asic cmd return 8c908213
[   36.574310] asic cmd return 90908213
[   36.578049] asic cmd return 94908213
[   36.581794] asic cmd return 98908213
[   36.585542] asic cmd return 9c908213
[   36.589343] chain2 total asic:40
[   36.592719] pos0--addr:00
[   36.595462] pos1--addr:04
[   36.598209] pos2--addr:08
[   36.600960] pos3--addr:0c
[   36.603704] pos4--addr:10
[   36.606446] pos5--addr:14
[   36.609197] pos6--addr:18
[   36.611939] pos7--addr:1c
[   36.614685] pos8--addr:20
[   36.617431] pos9--addr:24
[   36.620173] pos10--addr:28
[   36.623007] pos11--addr:2c
[   36.625837] pos12--addr:30
[   36.628685] pos13--addr:34
[   36.631522] pos14--addr:38
[   36.634368] pos15--addr:3c
[   36.637201] pos16--addr:40
[   36.640035] pos17--addr:44
[   36.642872] pos18--addr:48
[   36.645707] pos19--addr:4c
[   36.648544] pos20--addr:50
[   36.651385] pos21--addr:54
[   36.654214] pos22--addr:58
[   36.657047] pos23--addr:5c
[   36.659881] pos24--addr:60
[   36.662718] pos25--addr:64
[   36.665549] pos26--addr:68
[   36.668383] pos27--addr:6c
[   36.671218] pos28--addr:70
[   36.674056] pos29--addr:74
[   36.676893] pos30--addr:78
[   36.679819] pos31--addr:7c
[   36.682666] pos32--addr:80
[   36.685511] pos33--addr:84
[   36.688350] pos34--addr:88
[   36.691178] pos35--addr:8c
[   36.694015] pos36--addr:90
[   36.696845] pos37--addr:94
[   36.699688] pos38--addr:98
[   36.702526] pos39--addr:9c
[   36.705367] chain2_asic_exist{0xffffffff}
[   36.709564] clear FPGA nonce buffer
[   36.713727] get chain3 reg0x0
[   36.716864] send BC data:
[   36.716864] 0x0000: 0x03 0x03 0x00 0x1a 0x84 0x00 0x00 0x11 
[   36.823791] asic cmd return 00908213
[   36.827547] asic cmd return 04908213
[   36.831288] asic cmd return 08908213
[   36.835034] asic cmd return 0c908213
[   36.838775] asic cmd return 10908213
[   36.842582] asic cmd return 14908213
[   36.846336] asic cmd return 18908213
[   36.850077] asic cmd return 1c908213
[   36.853820] asic cmd return 20908213
[   36.857559] asic cmd return 24908213
[   36.861396] asic cmd return 28908213
[   36.865150] asic cmd return 2c908213
[   36.868894] asic cmd return 30908213
[   36.872638] asic cmd return 34908213
[   36.876382] asic cmd return 38908213
[   36.880183] asic cmd return 3c908213
[   36.883931] asic cmd return 40908213
[   36.887672] asic cmd return 44908213
[   36.891412] asic cmd return 48908213
[   36.895156] asic cmd return 4c908213
[   36.898960] asic cmd return 50908213
[   36.902707] asic cmd return 54908213
[   36.906453] asic cmd return 58908213
[   36.910198] asic cmd return 5c908213
[   36.913949] asic cmd return 60908213
[   36.917759] asic cmd return 64908213
[   36.921504] asic cmd return 68908213
[   36.925259] asic cmd return 6c908213
[   36.929006] asic cmd return 70908213
[   36.932754] asic cmd return 74908213
[   36.936568] asic cmd return 78908213
[   36.940311] asic cmd return 7c908213
[   36.944056] asic cmd return 80908213
[   36.947796] asic cmd return 84908213
[   36.951535] asic cmd return 88908213
[   36.955348] asic cmd return 8c908213
[   36.959096] asic cmd return 90908213
[   36.962842] asic cmd return 94908213
[   36.966585] asic cmd return 98908213
[   36.970325] asic cmd return 9c908213