Topic: Problems with all my Avalon machines (Read 132 times)

nevermind, found the version of FMS with the tab....

Hi,

I have looked everywhere and can't find the actual syntax required to run this command, I have FMS, can see everything, but have no idea what to actually type in the diagnose command window. Any help or links to documentation on commands would be awesome!

Based on your logs there are lots of hardware error and only two hashboard is working properly except the 3rd one which shows abnormal status.

What I would like you to try is to physically replug cables on that hashboard and before you plug cable make sure to clean all terminals first then try it again.

If it does not work try the Aging to refresh your miner you can find it on FMS tool.
You can download the FMS tool on Canaan support https://canaan.io/service/447

{'STATUS':[{'STATUS':'S','When':0,'Code':11,'Msg':'Summary','Description':'cgminer 4.11.1'}],'SUMMARY':[{'Elapsed':408,'MHS av':0.00,'MHS 30s':0.00,'MHS 1m':0.00,'MHS 5m':0.00,'MHS 15m':0.00,'Found Blocks':0,'Getworks':14,'Accepted':0,'Rejected':0,'Hardware Errors':1492,'Utility':0.00,'Discarded':9504879,'Stale':0,'Get Failures':1,'Local Work':2985,'Remote Failures':0,'Network Blocks':1,'Total MH':0.0000,'Work Utility':0.00,'Difficulty Accepted':0.00000000,'Difficulty Rejected':0.00000000,'Difficulty Stale':0.00000000,'Best Share':0,'Device Hardware%':100.0000,'Device Rejected%':0.0000,'Pool Rejected%':0.0000,'Pool Stale%':0.0000,'Last getwork':0}
{'STATUS':[{'STATUS':'S','When':0,'Code':70,'Msg':'CGMiner stats','Description':'cgminer 4.11.1'}],'STATS':[{'STATS':0,'ID':'AVA100','Elapsed':408,'Calls':0,'Wait':0.000000,'Max':0.000000,'Min':99999999.000000,'MM ID0':'Ver[10xx-20033101_daa810f_57f076c] DNA[02010000a820779c] MEMFREE[1808128.0] NETFAIL[89 101 0 0 0 0 0 0] SYSTEMSTATU[Work: In Work, Hash Board: 2 ] Elapsed[426] BOOTBY[0x11.00000000] LW[63646] MH[846 646 0] HW[1492] DH[39.921%] Temp[37] TMax[71] TAvg[61] Fan1[5857] Fan2[5932] Fan3[6059] Fan4[5990] FanR[89%] Vo[0] PS[0 0 0 0 0 0] PLL0[5932 573 189 32] PLL1[5991 530 184 21] PLL2[0 0 0 0] GHSmm[32161.48] GHSavg[0.00] WU[0.00] Freq[398.47] Led[0] MGHS[0.00 0.00 0.00] MTmax[69 71 -40] MTavg[61 62 0] TA[0] ECHU[512 512 131073] ECMM[0] SF0[587 612 637 662] SF1[587 612 637 662] SF2[587 612 637 662] PVT_T0[ 58 56 53 55 57 60 60 59 56 56 61 62 63 61 57 57 61 63 61 59 57 56 61 65 61 60 57 56 60 60 62 60 56 56 61 63 61 59 57 56 59 61 61 58 56 54 59 60 59 57 55 52 58 56 60 65 66 65 63 60 62 63 66 65 64 62 61 65 65 67 65 63 63 67 66 67 65 63 62 64 67 66 66 63 62 65 68 68 67 63 65 67 69 66 66 64 62 66 65 64 66 63 62 65 64 65 64 62 61 65 66 64 63 58] PVT_T1[ 56 54 52 53 57 59 59 58 54 56 60 60 59 58 56 55 61 62 61 59 55 55 58 60 60 58 55 55 59 61 60 60 57 55 57 60 60 59 56 56 59 60 59 59 55 55 58 60 59 58 55 52 55 57 60 63 62 66 67 65 65 69 67 64 69 66 65 69 65 63 65 63 64 68 67 67 71 67 70 70 69 69 69 66 66 68 68 69 69 67 63 66 65 66 66 64 66 67 67 67 68 66 64 66 67 65 66 65 64 64 64 66 63 60] PVT_T2[-40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40] PVT_V0[316 319 319 317 317 319 305 304 305 314 314 314 312 310 311 318 316 314 315 314 313 313 313 313 311 310 310 314 313 313 307 305 305 314 313 311 309 308 308 313 313 313 317 317 317 315 316 317 311 310 311 315 318 319 305 300 295 304 300 300 309 312 308 301 299 299 301 298 296 306 307 308 306 308 310 295 296 297 292 294 292 292 290 290 295 291 290 295 293 291 298 296 292 303 300 298 303 303 302 298 295 297 302 302 299 306 304 305 298 299 298 291 293 295] PVT_V1[298 298 299 322 320 317 293 291 290 319 319 318 318 316 316 315 313 311 274 275 275 277 277 278 274 275 274 297 296 294 315 313 313 315 316 313 304 302 304 314 314 314 294 295 295 310 310 309 315 312 312 321 322 325 324 320 317 303 304 303 310 307 309 316 314 314 316 314 313 275 276 275 312 309 310 288 284 283 311 310 309 291 289 292 274 277 275 306 307 310 314 314 317 307 313 315 293 296 299 303 300 302 307 305 301 314 315 314 307 308 312 301 306 307] PVT_V2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] MW[32588 32596 0] MW0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] MW1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] MW2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] CRC[13 19 0] POW_I2C[FAILED] FACOPTS0[] FACOPTS1[] WORKMODE[1]','MM Count':1,'Smart Speed':1,'Connection Overloaded':false,'Voltage Level Offset':0,'Nonce Mask':25}

this is my referral code for viabtc.com

https://www.viabtc.com/signup?refer=257609


or no referral code.

https://www.viabtc.com/signup?


open an account with them point one miner and see if it works.

use pps+ payment plan.

you do not need to use my referral. you can use the second link.

a smart miner has multiple pools that they know work.


pool =         stratum+tcp://btc.viabtc.io:3333

worker =      youraccountname.0001

password =  x



.0001 first avalon
.0002 second avalon
.0003 third avalon

try the gear at ckpool
try the gear at viabtc

let us know if they work.

so on and so forth.

let us know if it works at viabtc.

Why would you use Antpool in the first place? please stop using it, they are stealing your profit.

Point your miners to cksolo pool just to confirm the problem is pool related (the pool requires no registration so it's a great pool to test miners)

Enter the following:

URL:


WORKER

Any valid BTC address you own and then add . (dot) and the a miner name for example

**Use your own BTC address just in case you hit a block.

PASSWORD


And then to check the hashrate on the pool, just use this URL


** Again after users/ is your BTC address which you entered as the worker name, then post your BTC address here so we can see your hashrate, also post the miner logs.

That's not a log

my miners have worked normally for 1 year and from one moment to another they have stopped working.

I suggest copying your miner API logs and posting them here so that we can check the issue of your miner.

Sometimes miners do not work if you pasted a pool with extra or missing characters or have extra spaces. Typing manually should fix your issue.

Hello I tell you my problem to see if someone can help me.  I have about 12 Avalon 1066 machines and on March 28 they stopped working for no reason, the funny thing is that I have another two from whatsminer and they are still working normally I have checked everything, internet electricity and everything is correct it seems to be a problem of the pool , but I don't know.  the machines connect correctly but they do not manage to exceed the mining speed above 2 ths and they disconnect.  They seem to work and try to mine but it looks like an Antpool acceptance issue.  please I appreciate your help.