Problems with miner... | Bitcointalksearch.org

ViperCS

full member

Activity: 197

Merit: 100

Quote from: ViperCS on June 05, 2017, 08:45:32 AM

ETH: 06/05/17-15:42:47 - New job from exp.suprnova.cc:3333
ETH - Total Speed: 16.280 Mh/s, Total Shares: 69, Rejected: 0, Time: 00:14
ETH: GPU0 16.280 Mh/s
ETH: 06/05/17-15:42:49 - SHARE FOUND - (GPU 0)
ETH: Share accepted (93 ms)!
DevFee: ETH: Stratum - connecting to 'us1.ethermine.org' <149.56.26.221> port 4444
DevFee: ETH: Stratum - Connected (us1.ethermine.org:4444)
ETH: Authorized
DevFee: start mining
Setting DAG epoch #127...
Setting DAG epoch #127 for GPU #0
Create GPU buffer for GPU #0
OpenCL error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
GPU0 t=73C fan=55%
Setting DAG epoch #127 for GPU #0
GPU 0, OpenCL error -30 - cannot write buffer for DAG
DevFee: ETH: 06/05/17-15:43:13 - New job from us1.ethermine.org:4444

Here is cut from console when it happens. It happens nearly all the time after 15 minutes of work.
I tried changing few drivers and everything.
Tried changing intensity for dag.
Please help :c

Thanks of flood of answers, turns out that it was beacouse for exp 2gb gpu's doesnt work anymore! :c rest in piece. Going back for zcash!

ViperCS

full member

Activity: 197

Merit: 100

ETH: 06/05/17-15:42:47 - New job from exp.suprnova.cc:3333
ETH - Total Speed: 16.280 Mh/s, Total Shares: 69, Rejected: 0, Time: 00:14
ETH: GPU0 16.280 Mh/s
ETH: 06/05/17-15:42:49 - SHARE FOUND - (GPU 0)
ETH: Share accepted (93 ms)!
DevFee: ETH: Stratum - connecting to 'us1.ethermine.org' <149.56.26.221> port 4444
DevFee: ETH: Stratum - Connected (us1.ethermine.org:4444)
ETH: Authorized
DevFee: start mining
Setting DAG epoch #127...
Setting DAG epoch #127 for GPU #0
Create GPU buffer for GPU #0
OpenCL error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
GPU0 t=73C fan=55%
Setting DAG epoch #127 for GPU #0
GPU 0, OpenCL error -30 - cannot write buffer for DAG
DevFee: ETH: 06/05/17-15:43:13 - New job from us1.ethermine.org:4444

Here is cut from console when it happens. It happens nearly all the time after 15 minutes of work.
I tried changing few drivers and everything.
Tried changing intensity for dag.
Please help :c

ViperCS

full member

Activity: 197

Merit: 100

Quote from: ViperCS on June 04, 2017, 04:39:27 AM

Quote from: ViperCS on June 03, 2017, 01:20:59 PM

NVM I did the thing. (restart every 30 mins)

Efficiency with that is nearly 0...
i get like 0.02$ per hour with reset every 30mins.
With other miners as i said its all good but only with that which i use...

clayminer has dag errors every 15 minutes. Help please 300 views and 1 peron amswered

ViperCS

full member

Activity: 197

Merit: 100

Quote from: ViperCS on June 03, 2017, 01:20:59 PM

NVM I did the thing. (restart every 30 mins)

Efficiency with that is nearly 0...
i get like 0.02$ per hour with reset every 30mins.
With other miners as i said its all good but only with that which i use...

ViperCS

full member

Activity: 197

Merit: 100

NVM I did the thing. (restart every 30 mins)

ViperCS

full member

Activity: 197

Merit: 100

[/quote]
Can i somehow make miner restart when hashing power is 0?
[/quote]
Or add to start script, thing that will restart every like 30 minutes?

ViperCS

full member

Activity: 197

Merit: 100

Quote from: Vann on June 03, 2017, 06:37:06 AM

Quote from: ViperCS on June 03, 2017, 06:28:02 AM

Quote from: Vann on June 03, 2017, 06:26:56 AM

Quote from: ViperCS on June 03, 2017, 06:22:43 AM

Quote from: Vann on June 03, 2017, 06:21:21 AM

Sounds like the driver is crashing I would uninstall the driver in safe mode using DDU and then reinstall the drivers. You also don't need cuda for AMD cards so uninstall that as well.

Also i tried other miners and games on full settings, crashing only in ethminer mining exp

Your miner settings could be too high. Try backing off the GPU core 10 MHz and the Memory clock 50 MHz, or lowering the intensity. Also check the cables and connectors on the card.

Tried both.

If you can try the card in another machine.

Can i somehow make miner restart when hashing power is 0?

Vann

hero member

Activity: 1036

Merit: 606

Quote from: ViperCS on June 03, 2017, 06:28:02 AM

Quote from: Vann on June 03, 2017, 06:26:56 AM

Quote from: ViperCS on June 03, 2017, 06:22:43 AM

Quote from: Vann on June 03, 2017, 06:21:21 AM

Sounds like the driver is crashing I would uninstall the driver in safe mode using DDU and then reinstall the drivers. You also don't need cuda for AMD cards so uninstall that as well.

Also i tried other miners and games on full settings, crashing only in ethminer mining exp

Your miner settings could be too high. Try backing off the GPU core 10 MHz and the Memory clock 50 MHz, or lowering the intensity. Also check the cables and connectors on the card.

Tried both.

If you can try the card in another machine.

ViperCS

full member

Activity: 197

Merit: 100

Quote from: Vann on June 03, 2017, 06:26:56 AM

Quote from: ViperCS on June 03, 2017, 06:22:43 AM

Quote from: Vann on June 03, 2017, 06:21:21 AM

Sounds like the driver is crashing I would uninstall the driver in safe mode using DDU and then reinstall the drivers. You also don't need cuda for AMD cards so uninstall that as well.

Also i tried other miners and games on full settings, crashing only in ethminer mining exp

Your miner settings could be too high. Try backing off the GPU core 10 MHz and the Memory clock 50 MHz, or lowering the intensity. Also check the cables and connectors on the card.

Tried both.

Vann

hero member

Activity: 1036

Merit: 606

Quote from: ViperCS on June 03, 2017, 06:22:43 AM

Quote from: Vann on June 03, 2017, 06:21:21 AM

Sounds like the driver is crashing I would uninstall the driver in safe mode using DDU and then reinstall the drivers. You also don't need cuda for AMD cards so uninstall that as well.

Also i tried other miners and games on full settings, crashing only in ethminer mining exp

Your miner settings could be too high. Try backing off the GPU core 10 MHz and the Memory clock 50 MHz, or lowering the intensity. Also check the cables and connectors on the card.

ViperCS

full member

Activity: 197

Merit: 100

Quote from: Vann on June 03, 2017, 06:21:21 AM

Sounds like the driver is crashing I would uninstall the driver in safe mode using DDU and then reinstall the drivers. You also don't need cuda for AMD cards so uninstall that as well.

Also i tried other miners and games on full settings, crashing only in ethminer mining exp

Vann

hero member

Activity: 1036

Merit: 606

Sounds like the driver is crashing I would uninstall the driver in safe mode using DDU and then reinstall the drivers. You also don't need cuda for AMD cards so uninstall that as well.

ViperCS

full member

Activity: 197

Merit: 100

So i started to mine EXP with 2GB r9 270
Everything is good till i start mining, it goes okay for some time then my gpu like retarts, screen turns black, everything lags, and goes back to normal but hashing goes down to 0 and i need to reset miner.
My setup:
MOBO: ASRock N68C-S UCC
RAM: 4gb ddr2 dual
CPU: Athlon ii x4 620 (4x2. Cool

GPU: r9 270
HDD: Old 128 gb hdd
Miner setup ;
ethminer -G -F http://exp.suprnova.cc:3000/ViperCS.ViperCS:x/20
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

I tried running cuda and opencl and both are the same
i tried to overclock (overclock down sorry english is not my 1st language :/)
Also after this problem win10 gives me message that RadeonWATT or something stopped working or something like that. I dont see this program on my pc also...
I did try old and new drivers, the same problem.

What to do? :/

Topic: Problems with miner... (Read 817 times)