Topic: pryzh reputation thread (Read 1265 times)
Thanks for the fast response and action!
only getting rejections on MINION1 (SCRYPT-A-NFACTOR 1.40 MH/S) Trying to mine GPU Coins 
Hi,I have just replied to your pm 5 mins ago. The rig was misconfigured and that is why you were getting rejects.
Issue has now been resolved, the total downtime of 20 mins has been compensated with 40 mins extra lease time.
I apologize as this was an issue on my end.
only getting rejections on MINION1 (SCRYPT-A-NFACTOR 1.40 MH/S) Trying to mine GPU Coins
Happy with the performance and service I got. Would rent again.
Great rig, speeds as advertised. Replied instantly to a question I had.
Highly recommend!
Highly recommend!
12h maxcoins rental. Rig was improved during the lease. Perfect !
only 1,7MH/s, not 2.15MH/s!
Hello. Would you please tell me where you got this speed measure from? I have just checked the logs for your rental of 3H on the 7th, and the average speed through your lease was 2.16 mh/s.
Did you take this speed measurement from the dashboard of your pool? If so, you should be aware that the dashboard measurement is not accurate as it is calculated using your submitted shares and does not display the actual hashing speed.
only 1,7MH/s, not 2.15MH/s!
+1 ,i have rent rig , no problem , thank you
24 hr rental, everything went fine. No disruptions that I saw on my side.
Please leave here your experience with renting my rigs on leaserig.net
Currently the rig for hire are 2 rigs:
Minion1 2.15mh/s consisting of 3x 280x Sapphire cards.
Minion2 2.15mh/s consisting of 3x 280x Sapphire cards.
All rigs are set up with remote access. If you are having any issues whatsoever, please send me a PM here it will go directly to my phone for fastest resolution
The rigs are in EU. Please use EU pool addresses for lower reject rate and best ping times.
Pool management strategy is failover, so please do not forget to add at least a second pool
If you hired my rig when declared speed was higher, you will get that speed or will be compensated by longer hash-time.
PLEASE DO NOT FORGET TO SET A FAILOVER POOL. IF YOUR POOL IS DOWN AND YOU HAVE NO BACKUP, THE RIG WILL BE HASHING AWAY ON DEFAULT POOL.
All my rigs have SAVE command enabled, so if cgminer crashes it will restart back to your pool automatically.
However if your pool goes down and there is no failover, the rig will either be in stale mode or hashing on the default pool.
DOWNTIME POLICY
20+ Hour Rent
If there is any downtime, it will be rounded to next 30 min and 30 min on top.
5-19 Hour Rent
If there is any downtime, it will be rounded to next 15 min + 15 min on top
Up to 5 Hour Rent
If there is any downtime, it will be rounded to next 5 min + 5 min on top
Currently the rig for hire are 2 rigs:
Minion1 2.15mh/s consisting of 3x 280x Sapphire cards.
Minion2 2.15mh/s consisting of 3x 280x Sapphire cards.
All rigs are set up with remote access. If you are having any issues whatsoever, please send me a PM here it will go directly to my phone for fastest resolution
The rigs are in EU. Please use EU pool addresses for lower reject rate and best ping times.
Pool management strategy is failover, so please do not forget to add at least a second pool
If you hired my rig when declared speed was higher, you will get that speed or will be compensated by longer hash-time.
PLEASE DO NOT FORGET TO SET A FAILOVER POOL. IF YOUR POOL IS DOWN AND YOU HAVE NO BACKUP, THE RIG WILL BE HASHING AWAY ON DEFAULT POOL.
All my rigs have SAVE command enabled, so if cgminer crashes it will restart back to your pool automatically.
However if your pool goes down and there is no failover, the rig will either be in stale mode or hashing on the default pool.
DOWNTIME POLICY
20+ Hour Rent
If there is any downtime, it will be rounded to next 30 min and 30 min on top.
5-19 Hour Rent
If there is any downtime, it will be rounded to next 15 min + 15 min on top
Up to 5 Hour Rent
If there is any downtime, it will be rounded to next 5 min + 5 min on top
Jump to: