Author

Topic: PSU3300-3 PLUS red light (Read 135 times)

jr. member
Activity: 43
Merit: 22
March 26, 2023, 09:43:59 PM
#9
hi

many thanks, as mather of fact was one 5C430L MOSFET.

regards


I'm glad you found the culprit, that's great. If you need 5C430L MOSFET parts, feel free to contact ZEUS MINING.
legendary
Activity: 3374
Merit: 3095
Playbet.io - Crypto Casino and Sportsbook
March 26, 2023, 08:34:16 AM
#8
no visible burns... witch caps you are refering? the high voltage ones? or the ones near output terminals?

thanks

I'm talking about caps near output DC or some parts near DC output that might have some corrosions and rust that need to be cleaned with contact cleaner or any electronics cleaner.

Does it seem you found the culprit? MOSFET? Is the output gone or voltage drop after checking the MOSFET? You can desolder that part and check the MOSFET if it is short.
You can follow this guide here how to check short MOSFET.
newbie
Activity: 6
Merit: 0
March 25, 2023, 07:55:23 PM
#7
hi

many thanks, as mather of fact was one 5C430L MOSFET.

regards
jr. member
Activity: 43
Merit: 22
March 25, 2023, 01:55:48 AM
#6
Hope this manual can be helpful for you:
Avalon 3300W 3600W power supply repair tutorial
newbie
Activity: 6
Merit: 0
March 24, 2023, 09:18:32 PM
#5
Quote
Is the short circuit came from PSU? Disconnect the PSU to check it for short circuit and mostly capacitors or some burnt parts are common issue of PSUs.

yes, it came from psu.

no visible burns... witch caps you are refering? the high voltage ones? or the ones near output terminals?

thanks
legendary
Activity: 3374
Merit: 3095
Playbet.io - Crypto Casino and Sportsbook
March 24, 2023, 06:20:22 PM
#4
hi,

even using the jumper with power supply outside, it should have output from 13v main circuit, and measuring with multimiter, there´s a short beetween +13v and GND,



According to your logs under PS yes there is a 16 error which is pointing to a short circuit.
Is the short circuit came from PSU? Disconnect the PSU to check it for short circuit and mostly capacitors or some burnt parts are common issue of PSUs.
newbie
Activity: 6
Merit: 0
March 23, 2023, 07:04:12 PM
#3
hi,

even using the jumper with power supply outside, it should have output from 13v main circuit, and measuring with multimiter, there´s a short beetween +13v and GND,

eventough, follows the LOG

Code:
{'STATUS':[{'STATUS':'S','When':0,'Code':11,'Msg':'Summary','Description':'cgminer 4.11.1'}],'SUMMARY':[{'Elapsed':16,'MHS av':0.00,'MHS 30s':0.00,'MHS 1m':0.00,'MHS 5m':0.00,'MHS 15m':0.00,'Found Blocks':0,'Getworks':5,'Accepted':0,'Rejected':0,'Hardware Errors':0,'Utility':0.00,'Discarded':476186,'Stale':0,'Get Failures':0,'Local Work':3,'Remote Failures':0,'Network Blocks':1,'Total MH':0.0000,'Work Utility':0.00,'Difficulty Accepted':0.00000000,'Difficulty Rejected':0.00000000,'Difficulty Stale':0.00000000,'Best Share':0,'Device Hardware%':0.0000,'Device Rejected%':0.0000,'Pool Rejected%':0.0000,'Pool Stale%':0.0000,'Last getwork':0}
{'STATUS':[{'STATUS':'S','When':0,'Code':70,'Msg':'CGMiner stats','Description':'cgminer 4.11.1'}],'STATS':[{'STATS':0,'ID':'AVA100','Elapsed':16,'Calls':0,'Wait':0.000000,'Max':0.000000,'Min':99999999.000000,'MM ID0':'Ver[1166Pro-81-21072802_4ec6bb0_211fc46] DNA[0201000044ede2e2] MEMFREE[1257400.0] NETFAIL[0 0 0 0 0 0 0 0] SYSTEMSTATU[Work: In Work, Hash Board: 0 ] Elapsed[44] BOOTBY[0x01.00000000] LW[0] MH[0 0 0] HW[0] DH[0.000%] Temp[24] TMax[24] TAvg[24] Fan1[4892] Fan2[5287] Fan3[5290] Fan4[5270] FanR[72%] Vo[0] PS[16 1197 0 0 0 1240 75] PLL0[0 0 0 0] PLL1[0 0 0 0] PLL2[0 0 0 0] GHSspd[0.00] DHspd[0.000%] GHSmm[0.00] GHSavg[0.00] WU[0.00] Freq[0.00] Led[0] MGHS[0.00 0.00 0.00] MTmax[-273 -273 -273] MTavg[0 0 0] TA[0] Core[A3201] PING[0] POWS[0] HASHS[0 0 0] POOLS[0] SoftOFF[0] ECHU[1 1 1] ECMM[1] SF0[300 300 300 300] SF1[300 300 300 300] SF2[300 300 300 300] PVT_T0[-273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273] PVT_T1[-273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273] PVT_T2[-273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273] PVT_V0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] PVT_V1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] PVT_V2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] MW[0 0 0] MW0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] MW1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] MW2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] CRC[0 0 0] POW_I2C[OK] FACOPTS0[] FACOPTS1[] ATAOPTS0[] ATAOPTS1[] ADJ[0] Bar[0%] COP[0 0 0] MPO[3200] MVL[87] ATABD0[0 0 0 0] ATABD1[0 0 0 0] ATABD2[0 0 0 0] WORKMODE[0]','MM Count':1,'Smart Speed':1,'Voltage Level Offset':0,'Nonce Mask':25}
legendary
Activity: 3374
Merit: 3095
Playbet.io - Crypto Casino and Sportsbook
March 23, 2023, 06:45:42 PM
#2
If you could access the miner through a browser would you mind sharing the API logs here it can give us more insight into your miner's problem just put them inside the insert code tag so that it is easy to read?

What I see is that the PSU is not connecting properly or maybe it didn't give enough power when the hashboard starting to hash.
newbie
Activity: 6
Merit: 0
March 23, 2023, 05:38:09 PM
#1
Hello comunity,

I bought brand new psu from china, placed it on one of my 1166, and worked like a charm during 2 hours.

When i picked the machine to place it on the farm, i plugged all, started the psu, and the psu turn on, blinking green led, miner booted, started, but in the moment the minner tried to activate the power for the hashboards, the led turned to be solid red.
The miner remains on, accessible throught web browser, and each, lets say 2 minutes tries to reboot, but the solid PSU red led remains.

 Any sugestions?
Jump to: