Question for the PCIex extension cable

Shevek

sr. member

Activity: 252

Merit: 250

Quote from: cicada on September 21, 2011, 07:37:55 AM

Quote from: Shevek on September 21, 2011, 07:14:50 AM

I guess you've bought a PCIe x1 -> x1 cable extender Huh

Which would be perfectly fine. You do not need a full 16x connection to mine. I have 4 cards running well on 1x -> 1x extenders.

[Edit] NM, I see where the OP mentions 1->16x extenders where the illustration indicates otherwise.

Anyway, thanks for the tip.

cicada

full member

Activity: 196

Merit: 100

Quote from: Shevek on September 21, 2011, 07:14:50 AM

I guess you've bought a PCIe x1 -> x1 cable extender Huh

Which would be perfectly fine. You do not need a full 16x connection to mine. I have 4 cards running well on 1x -> 1x extenders.

[Edit] NM, I see where the OP mentions 1->16x extenders where the illustration indicates otherwise.

Shevek

sr. member

Activity: 252

Merit: 250

Quote from: tsigalko on July 19, 2011, 12:55:12 PM

There are two PCIexpreX1 slots on the motherboard and I think probably I can run the third card by the extension cable.I bought one from cablesaures
PCIe x1 -> x16 Adapter Extender Cable
https://cablesaurus.com/index.php?main_page=product_info&cPath=1&products_id=10
But I am not sure how to connect them together. Could anyone be kind enough to give me some instruction?
I took two pictures but do not know how to upload it. I posted the link@picasa here
https://picasaweb.google.com/104501255284307964408/20110719?authkey=Gv1sRgCNeS1pmZyYHUigE#5631122665237192994
https://picasaweb.google.com/104501255284307964408/20110719?authkey=Gv1sRgCNeS1pmZyYHUigE#5631122679902177426

I guess you've bought a PCIe x1 -> x1 cable extender Huh

cicada

full member

Activity: 196

Merit: 100

Quote from: Morebitcoinsplease on July 19, 2011, 03:44:33 PM

To ensure the card doesn't short out or cause problems make sure the exposed area (Red Lines) don't touch anything

A little electrical tape over the exposed connector goes a long way to solving that, and helps keep loose extenders in place to boot Wink

Morebitcoinsplease

member

Activity: 84

Merit: 10

Quote from: tsigalko on July 19, 2011, 01:20:53 PM

Thank you so much for the help.
It is a pity that I can put the picture in.
If I am right, the "gold finger" of the graphic card (PCI exX16) is something like this
|||||||||||||||||||||||||||||| |||||

Is it right that I only the Female end of the extension cable to the blue part, leaving the red part empty to the air?
I want to make sure about that. It is the first time that I used the extension cable and I am a litter afraid that I may burn my motherboard into ashes.
Thanks again for any help.

You are correct, the way you showing it with the colors.

To ensure the card doesn't short out or cause problems make sure the exposed area (Red Lines) don't touch anything, best to hang the card from a support, look around the forums and see how people are hanging their cards using PCI-Extenders. Personally I went with the metal shoe holders, to get some ideas check out how other people built their rigs. http://forum.bitcoin.org/index.php?topic=7216.640.

tsigalko

newbie

Activity: 21

Merit: 0

Thank you so much for the help.
It is a pity that I can put the picture in.
If I am right, the "gold finger" of the graphic card (PCI exX16) is something like this
|||||||||||||||||||||||||||||| |||||

Is it right that I only the Female end of the extension cable to the blue part, leaving the red part empty to the air?
I want to make sure about that. It is the first time that I used the extension cable and I am a litter afraid that I may burn my motherboard into ashes.
Thanks again for any help.

Morebitcoinsplease

member

Activity: 84

Merit: 10

Quote from: tsigalko on July 19, 2011, 12:55:12 PM

Hi Friends, I am a new-bee dealing with multi-graphic cards.
I have a Asrock 870 extreme motherboard and I want to install 2*5830+1*5850 card.
There was 2*PCI expressX16 slots, I plugged two cards inside and everything looks fine for me now. But I have problems for the third card.
There are two PCIexpreX1 slots on the motherboard and I think probably I can run the third card by the extension cable.I bought one from cablesaures
PCIe x1 -> x16 Adapter Extender Cable
https://cablesaurus.com/index.php?main_page=product_info&cPath=1&products_id=10
But I am not sure how to connect them together. Could anyone be kind enough to give me some instruction?
I took two pictures but do not know how to upload it. I posted the link@picasa here
https://picasaweb.google.com/104501255284307964408/20110719?authkey=Gv1sRgCNeS1pmZyYHUigE#5631122665237192994
https://picasaweb.google.com/104501255284307964408/20110719?authkey=Gv1sRgCNeS1pmZyYHUigE#5631122679902177426

It is correct method to use the extension cable?
Thanks in advance!

The pictures didn't load for me but that could be my PC, either way yes there is a correct, you will notice the cable is split in a way that has a gap between the two segments and if you look on the video card it has the same gap, so you want to match the little short piece (closest to video input) to the exact spot as on the cable. Just match the two up and you should be good. Sorry I don't have a picture but just look at the cable and your video card you will see what I am talking about.

tsigalko

newbie

Activity: 21

Merit: 0

Hi Friends, I am a new-bee dealing with multi-graphic cards.
I have a Asrock 870 extreme motherboard and I want to install 2*5830+1*5850 card.
There was 2*PCI expressX16 slots, I plugged two cards inside and everything looks fine for me now. But I have problems for the third card.
There are two PCIexpreX1 slots on the motherboard and I think probably I can run the third card by the extension cable.I bought one from cablesaures
PCIe x1 -> x16 Adapter Extender Cable
https://cablesaurus.com/index.php?main_page=product_info&cPath=1&products_id=10
But I am not sure how to connect them together. Could anyone be kind enough to give me some instruction?
I took two pictures but do not know how to upload it. I posted the link@picasa here
https://picasaweb.google.com/104501255284307964408/20110719?authkey=Gv1sRgCNeS1pmZyYHUigE#5631122665237192994
https://picasaweb.google.com/104501255284307964408/20110719?authkey=Gv1sRgCNeS1pmZyYHUigE#5631122679902177426

It is correct method to use the extension cable?
Thanks in advance!

Topic: Question for the PCIex extension cable (Read 1360 times)