R9 290 problem | Bitcointalksearch.org

Janation

hero member

Activity: 1722

Merit: 528

Quote from: kanoptx on April 26, 2016, 07:55:24 PM

ok, so i've unistalled latest drivers. installed 15.12. I've also allocated memory from 16 to 20gb. and i've set intensity to 0 in the claymore's miner. the temp went way down. it's at 77c. the gpu core is way more stable but it will stil drop from 947 (default). i'm getting 22 smthing mh/s which sucks but if it doesnt freeze it's better than nothing... thx guys, ill let you know if it works (when i get up and see the rig working/frozen).. i dont have my hopes up, though. i think the card may be faulty...

You need to under volt your GPU core. If you use -100 mV in the MSI after burner, it will reduce the power usage by 10-20%.

kanoptx

sr. member

Activity: 406

Merit: 250

www.cryptocompare.com

ok, so i've unistalled latest drivers. installed 15.12. I've also allocated memory from 16 to 20gb. and i've set intensity to 0 in the claymore's miner. the temp went way down. it's at 77c. the gpu core is way more stable but it will stil drop from 947 (default). i'm getting 22 smthing mh/s which sucks but if it doesnt freeze it's better than nothing... thx guys, ill let you know if it works (when i get up and see the rig working/frozen).. i dont have my hopes up, though. i think the card may be faulty...

kanoptx

sr. member

Activity: 406

Merit: 250

www.cryptocompare.com

Quote from: Unacceptable on April 25, 2016, 04:05:34 AM

DO NOT USE LATEST DRIVERS!!!!!!!

They are not working well for mining..............

I use 15.15.1004 for my 380 4gig & it works great!! Wink

http://support.amd.com/en-us/kb-articles/Pages/AMD-Radeon-300-Series.aspx#

cant seem to find it on the amd site they only let me download the latest drivers

Unacceptable

legendary

Activity: 2212

Merit: 1001

Quote from: kanoptx on April 25, 2016, 06:50:21 AM

so i should unistall the latest drivers and download this one? i am indeed using claymore's miner. i will try this before underclocking.

I'm not sure this will fix it but it's worth a shot!

thx

Yes,just keep trying drivers that are recommended.

I use only 1 card per PC,I have LOTS of spare mobo's,CPU's,RAM,PSU's so I only need to buy the vid cards,so the driver I recommend is based on that Grin

Also I use this miner:

ethereum-mining-windows:

http://www60.zippyshare.com/v/VSsUc5ew/file.html

I have never been any good with Linux/Unbuntu sooooo Sad

kanoptx

sr. member

Activity: 406

Merit: 250

www.cryptocompare.com

so i should unistall the latest drivers and download this one? i am indeed using claymore's miner. i will try this before underclocking.

I'm not sure this will fix it but it's worth a shot!

thx

Valodja

newbie

Activity: 42

Merit: 0

I ran multimainer only ether is stable sometimes slips drawdown . And in general I like.

fricircled

full member

Activity: 201

Merit: 100

The AMD catalyst 15.11 or 15.12 is very good for Etheruem mining, especially if you use the Claymore miners.

Unacceptable

legendary

Activity: 2212

Merit: 1001

DO NOT USE LATEST DRIVERS!!!!!!!

They are not working well for mining..............

I use 15.15.1004 for my 380 4gig & it works great!! Wink

http://support.amd.com/en-us/kb-articles/Pages/AMD-Radeon-300-Series.aspx#

Valodja

newbie

Activity: 42

Merit: 0

somebody living there ?

Valodja

newbie

Activity: 42

Merit: 0

Various parameters have tried but nothing helped .

Valodja

newbie

Activity: 42

Merit: 0

ASUS R9 290 CPU jumps from 0 % to 100 % . It emerges in the chart timber .

kanoptx

sr. member

Activity: 406

Merit: 250

www.cryptocompare.com

that's what i'll try tomorrow. i think 800 should be enough. thx

Janation

hero member

Activity: 1722

Merit: 528

Quote from: kanoptx on April 24, 2016, 04:01:24 PM

Quote from: CorePrime95 on April 23, 2016, 12:42:45 PM

94c is very hot.
Try running PC open.
You dont need motherboard BIOS to change powerplay. Download sapphire trixx Software. Underclock core and mem.
Reinstall drivers 15.12 crimson.
What powersupply do you use? All cables connected?

It's an open rig. i've set fan speed to 100% got it to 84-86c. I have the latest drivers. My PSU is an enermax 1600w everything's connected. this only happens to me with this card. runs well a bit but then freezes.

I tried setting gpu clock to 947 which is factory value. but it goes down as I run the miner. I think I will try to underclock it to 800 tomorrow when i put it in the rig again. I will also try to set miner insentity lower.

thank you

Can you undervoltage it. If you reduce the voltage by 10%, the power consumption will go down 20%.

kanoptx

sr. member

Activity: 406

Merit: 250

www.cryptocompare.com

Quote from: CorePrime95 on April 23, 2016, 12:42:45 PM

94c is very hot.
Try running PC open.
You dont need motherboard BIOS to change powerplay. Download sapphire trixx Software. Underclock core and mem.
Reinstall drivers 15.12 crimson.
What powersupply do you use? All cables connected?

It's an open rig. i've set fan speed to 100% got it to 84-86c. I have the latest drivers. My PSU is an enermax 1600w everything's connected. this only happens to me with this card. runs well a bit but then freezes.

I tried setting gpu clock to 947 which is factory value. but it goes down as I run the miner. I think I will try to underclock it to 800 tomorrow when i put it in the rig again. I will also try to set miner insentity lower.

thank you

CorePrime95

full member

Activity: 190

Merit: 101

94c is very hot.
Try running PC open.
You dont need motherboard BIOS to change powerplay. Download sapphire trixx Software. Underclock core and mem.
Reinstall drivers 15.12 crimson.
What powersupply do you use? All cables connected?

kanoptx

sr. member

Activity: 406

Merit: 250

www.cryptocompare.com

Hey, I bought a used XFX R9 290 for mining and set it up in my rig but it gives me a bsod error and crashes the computer. the card heats up a bit (94) but i think this is normal for this card. I have searched through google for a solution and found many people seem to have this problem outside of mining. I came to the conclusion that it may be because of the powerplay function which has problems with pcie 2.0, i believe.

I think I will turn it off and i have also read this may fix it:

"I went into my motherboard bios and set the VCCSA to 1.1V. Then set my MSI Afterburner to Power Limit -5% (yes, that is MINUS 5%) and my memory clock to 1200MHz (slight downclock from 1250MHz)."

any toughts? thank you.

Topic: R9 290 problem (Read 1029 times)