Author

Topic: R9 390, 8Gb Card problem (Read 363 times)

newbie
Activity: 27
Merit: 0
September 03, 2017, 08:42:38 AM
#5
Sounds like you have a fixed fan speed set in Afterburner - go to Settings and set a custom fan profile, or use the fan slider on the main page and move it UP.



But funny thing is only doing when etherium is opened? for try i open Musicon almost 5 hours its working without any problem about fan but if i open eth in 5 second closing the graphic card fan speed to 20.Any one seen this weird s...t before Smiley)

Thanks

 Hmmm. THAT is starting to sound more like the miner software is configured for a fan speed limit that's too low, or too high a temperature set point.

 Claymore in particular is known to override Afterburner settings if you have the mining software set for temp control/fan control.



i am using bellow for mining only

Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.8

and open msi afterburn 4.4.0 software

nothing else. So after testing with musicoin i seen problem comes only from eth software because now i close musicoin and start etc, working well without closing fan.

But other weird thing is etherium not close the fan for rx 540 cards (i got 6 of them) only closing r9 390 series (2x i got) fan control.

I know its so weird i hope someone had this problem and solve somehow and help me of course Smiley

Thanks for your time LEO
legendary
Activity: 1498
Merit: 1030
September 03, 2017, 02:38:14 AM
#4
Sounds like you have a fixed fan speed set in Afterburner - go to Settings and set a custom fan profile, or use the fan slider on the main page and move it UP.



But funny thing is only doing when etherium is opened? for try i open Musicon almost 5 hours its working without any problem about fan but if i open eth in 5 second closing the graphic card fan speed to 20.Any one seen this weird s...t before Smiley)

Thanks

 Hmmm. THAT is starting to sound more like the miner software is configured for a fan speed limit that's too low, or too high a temperature set point.

 Claymore in particular is known to override Afterburner settings if you have the mining software set for temp control/fan control.

newbie
Activity: 27
Merit: 0
September 02, 2017, 04:42:21 PM
#3
Sounds like you have a fixed fan speed set in Afterburner - go to Settings and set a custom fan profile, or use the fan slider on the main page and move it UP.



But funny thing is only doing when etherium is opened? for try i open Musicon almost 5 hours its working without any problem about fan but if i open eth in 5 second closing the graphic card fan speed to 20.Any one seen this weird s...t before Smiley)

Thanks
legendary
Activity: 1498
Merit: 1030
September 02, 2017, 03:19:36 PM
#2
Sounds like you have a fixed fan speed set in Afterburner - go to Settings and set a custom fan profile, or use the fan slider on the main page and move it UP.

newbie
Activity: 27
Merit: 0
September 02, 2017, 09:55:53 AM
#1
Hi Everyone i hope someone can help me about that.

My problem is when i used msi afterburn software , fan speed goes %20 itself when etherium is working and for that reason card overheating and close itself. I am using original bios for it and using core clock 1100/ memory  clock 1500 oc

Any reason why fan speed goes itself?

Regards
Thanks
Jump to: