Topic: Rack for my Antminers S9 (Read 335 times)
By the way, if you still need servers for data, you should definitely think about open racks for servers. Because they are convenient and compact. They help the servers to be in a comfortable position. I for example did so, found an open frame rack server , put it and now forget about the problems with the placement of servers. I think it is certainly not redundant. I hope I was able to help someone who will also try.
Nice Rack!! We have a slightly larger operation, around 200 miners. Had a heat issue as soon as we turned on more than 30, we also burnt our power drop of the warehouse. Needless to say we finally got a new drop and phase 3 power, so we could plug all the miners in. We ended up creating a HOT BOX to take all the heat out and installed 2 fans at the end of the box to suck all the air out and offset our positive air pressure in the box and 2 fans in the room to offset the negative pressure in the room. Here's some before and after pics, this setup created temps of 100+ in the room; needless to say, our little funneling of the miner exhaust has dropped the temp in the room almost 20 degrees.
https://imgur.com/a/f0NzKoo
https://imgur.com/a/f0NzKoo
As I've seen there is no issues with them as plate is strong and welds are done as they should. Original vent screws are long enough if you're not using intakes, if you are using intakes like I did, you need to get a bit longer ones (depends how much is intake thickness).
Those metal rack adapters are nice, would they support the miners if they were mounted horizontally?
Those metal rack adapters are nice, would they support the miners if they were mounted horizontally?
Hi,
I'm just an mining wannabee, so I've bought some S9 some time ago. Had constant heating problems with them and space limitation, noise problems, unhappy wife, so not ideal conditions at all...
Wish to share my experiences.
Initially I've created wooden box for 3pcs bought last year. First box was made from our missing cat's house, which was not the best solution... Next I've made a bigger wooden box again and put some insulation/noise reduction foam inside, which actually did reduced noise levels for about 20db when closed.
I did design and 3D make intakes and exhausts to mount on antminers. I do not recommend PLA at all (luckily I didn't used it, also not PLA "fire" as they will deform thru time. PETG seems to work overtime. Not sure how airflow thru intake (and exhaust) actually helps in performance (eg. air delivery) as I did no test, but are made close to turbine's in/outs, plus it's much easier to connects the air hoses/tubes.
I had issues with overheating as incoming heat (had air delivery from outside) affected the miners, so I've let room air inside and temperatures imeediately dropped to about +-80 degs, measured +-85degs now in hottest summer days.
Then I've made Y connector for 120mm air tube as miners increased and the size of the room window remains the same... :S So, now I have 2:1 Y on exhausts and it actually performs really well, no any raised heating issues.
Off course I had no more room in the old box so I had to think for another solution.
On the end I've made custom antminer metal racks for my miners, based on 19inch server casings with 7U height. There is room for 3 miners (tested with S9/S91, maybe S7 also fits in there), plus 3 PSU's, all nicely set. Miners and PSU are screwed directly to the rack.
Also I thought that for my room it's better that miners are fit in vertical position instead horizontal and for me it made all easier to set up. Changed air hoses to insulated + noise reduction ones. Made again another box from previous one, got also 4cm insulated panels and new box was born. Working perfectly on smaller area than before.
On the end I've added some cooling for the box itself, got 2x 3000rpm 120mm vents. All good now.
I'm planning to order some more racks, if anyone interested too can PM me.
Thank you for your comments.
Box before:
https://preview.ibb.co/dyQ8ae/antminer_rack_00.jpg
Box in the making:
https://preview.ibb.co/jbOuFe/antminer_rack_01.jpg
https://preview.ibb.co/eeKqoz/antminer_rack_03.jpg
https://preview.ibb.co/i9SAoz/antminer_rack_06.jpg
I'm just an mining wannabee, so I've bought some S9 some time ago. Had constant heating problems with them and space limitation, noise problems, unhappy wife, so not ideal conditions at all...
Wish to share my experiences.
Initially I've created wooden box for 3pcs bought last year. First box was made from our missing cat's house, which was not the best solution...
Next I've made a bigger wooden box again and put some insulation/noise reduction foam inside, which actually did reduced noise levels for about 20db when closed.I did design and 3D make intakes and exhausts to mount on antminers. I do not recommend PLA at all (luckily I didn't used it, also not PLA "fire" as they will deform thru time. PETG seems to work overtime. Not sure how airflow thru intake (and exhaust) actually helps in performance (eg. air delivery) as I did no test, but are made close to turbine's in/outs, plus it's much easier to connects the air hoses/tubes.
I had issues with overheating as incoming heat (had air delivery from outside) affected the miners, so I've let room air inside and temperatures imeediately dropped to about +-80 degs, measured +-85degs now in hottest summer days.
Then I've made Y connector for 120mm air tube as miners increased and the size of the room window remains the same... :S So, now I have 2:1 Y on exhausts and it actually performs really well, no any raised heating issues.
Off course I had no more room in the old box so I had to think for another solution.
On the end I've made custom antminer metal racks for my miners, based on 19inch server casings with 7U height. There is room for 3 miners (tested with S9/S91, maybe S7 also fits in there), plus 3 PSU's, all nicely set. Miners and PSU are screwed directly to the rack.
Also I thought that for my room it's better that miners are fit in vertical position instead horizontal and for me it made all easier to set up. Changed air hoses to insulated + noise reduction ones. Made again another box from previous one, got also 4cm insulated panels and new box was born. Working perfectly on smaller area than before.
On the end I've added some cooling for the box itself, got 2x 3000rpm 120mm vents. All good now.
I'm planning to order some more racks, if anyone interested too can PM me.
Thank you for your comments.
Box before:
https://preview.ibb.co/dyQ8ae/antminer_rack_00.jpg
Box in the making:
https://preview.ibb.co/jbOuFe/antminer_rack_01.jpg
https://preview.ibb.co/eeKqoz/antminer_rack_03.jpg
https://preview.ibb.co/i9SAoz/antminer_rack_06.jpg
Jump to: