So - I got info from an Ubuntu forum that allowed me to save the /etc/X11... file - which meant that none of the mentioned commands would work. Actually what was needed was an updated command of : sudo amdconfig --adapter=all --initial every time a card is introduced.
Still, am having the same SSH issue - maybe someone has some input? Will modify subject.
Topic: Radeon 7950s not recognized and failed permission to save /etc/X11/xorg.conf (Read 1211 times)
February 19, 2014, 03:10:45 PM
February 19, 2014, 02:27:34 PM
I have a gigabyte UD5 MB, and am running between 3-5 Sapphire, radeon 7950 GPUs off an AMD, CPU and 2 x corsair 750 RM PSUs -
I have some questions with this configuration:
1) what command is meant to be used when introducing a GPU, or multiple GPUs to Ubuntu? When I try and do this it wont recognize them, or the recognition is inconsistent.
2) After reading a variety of forums, with many results, I tried different commands.
Atconfig --adapter=all --intitial -f
Atconfig --adapter=all --intitial
Atconfig --intitial
The only command that shows the true amount of GPUs is Atconfig --adapter=all --intitial but when I do this command I get a failure message saying 'Writing to '/etc/X11/xorg.conf failed. Permission denied. However, if I run Atconfig --intitial, it recognizes only one GPU, but will update and save /etc/X11/xorg.conf correctly.
The question with regard to the above information is a) How can I delete ALL versions of /etc/X11/xorg.conf that have been written, and b) how can I rewrite /etc/X11/xorg.conf to recognize all GPUs in the machine currently?
3rd question - My rig dies if I run it through the keyboard and monitor that are connected to the CPU/MB- If I run it through SSH it stays running with suggested config settings for the 7950s, yet somewhere along the line of the changes from the cammands listed above, my SSH stopped showing the GPUS and I get the following error:
[2014-02-19 18:57:11] Started cgminer 3.7.2 [2014-02-19 18:57:11] Loaded configuration file cgminer.conf [2014-02-19 18:57:11] clDevicesNum returned error, no GPUs usable [2014-02-19 18:57:11] No devices detected! [2014-02-19 18:57:11] Waiting for USB hotplug devices or press q to quit
Does anyone have any idea how to make the GPUs visible again? They load on the main computer in cg startup, and I see all three (even if in the suggested previous questions I have problems with recognition - I think this is because a previous '/etc/X11/xorg.conf has them configured as 3 in their respective PCIE slots) but on the SSH I get nothing - only looks as if its hunting for blocks, but no hashrates, etc.
A friend configured the drivers, and Im totally clueless If I needed to reinstall drivers, would you recommend following this procedure - help.ubuntu.com/community/BinaryDriverHowto/AMD ?
I really, really appreciate any help possible.
Thank you!
I have some questions with this configuration:
1) what command is meant to be used when introducing a GPU, or multiple GPUs to Ubuntu? When I try and do this it wont recognize them, or the recognition is inconsistent.
2) After reading a variety of forums, with many results, I tried different commands.
Atconfig --adapter=all --intitial -f
Atconfig --adapter=all --intitial
Atconfig --intitial
The only command that shows the true amount of GPUs is Atconfig --adapter=all --intitial but when I do this command I get a failure message saying 'Writing to '/etc/X11/xorg.conf failed. Permission denied. However, if I run Atconfig --intitial, it recognizes only one GPU, but will update and save /etc/X11/xorg.conf correctly.
The question with regard to the above information is a) How can I delete ALL versions of /etc/X11/xorg.conf that have been written, and b) how can I rewrite /etc/X11/xorg.conf to recognize all GPUs in the machine currently?
3rd question - My rig dies if I run it through the keyboard and monitor that are connected to the CPU/MB- If I run it through SSH it stays running with suggested config settings for the 7950s, yet somewhere along the line of the changes from the cammands listed above, my SSH stopped showing the GPUS and I get the following error:
[2014-02-19 18:57:11] Started cgminer 3.7.2 [2014-02-19 18:57:11] Loaded configuration file cgminer.conf [2014-02-19 18:57:11] clDevicesNum returned error, no GPUs usable [2014-02-19 18:57:11] No devices detected! [2014-02-19 18:57:11] Waiting for USB hotplug devices or press q to quit
Does anyone have any idea how to make the GPUs visible again? They load on the main computer in cg startup, and I see all three (even if in the suggested previous questions I have problems with recognition - I think this is because a previous '/etc/X11/xorg.conf has them configured as 3 in their respective PCIE slots) but on the SSH I get nothing - only looks as if its hunting for blocks, but no hashrates, etc.
A friend configured the drivers, and Im totally clueless If I needed to reinstall drivers, would you recommend following this procedure - help.ubuntu.com/community/BinaryDriverHowto/AMD ?
I really, really appreciate any help possible.
Thank you!
Jump to: