Ended up finding the issue was the Pi and not the 2pac sticks. The slub_debug=FP fix outlined in the following thread seems to have done the trick for me and a few others experiencing the same problem-
https://bitcointalksearch.org/topic/m.5932931
So hopefully if anyone has the same problem and finds this thread it will save you searching through 5 billion posts and the inevitable condescending remarks when you ask for help from those who clearly have nothing else better to do with their life than troll people just trying to learn...
Topic: Raspberry Pi Crashing... (Read 459 times)
Back to the point of the OP -- you do know there is a 2PAC thread in the Hardware section here right? Ya know, one that covers all the in's and outs of running the sticks?
Brief answer, the PI is fine for running a lot of them. Primary limit is the USB power hub you use to feed them.
Brief answer, the PI is fine for running a lot of them. Primary limit is the USB power hub you use to feed them.
I recently got a Pi and had no problems getting it set up for running 2pac's with cgminer. While I have been waiting for more hardware to come in (better Hub, more 2pacs) I was not having a problem running a few 2pacs. I now have 5 and after running them at stock freq the damn thing crashes and I have to unplug/plug the power back in to get it up and running once more. Once that happens, I have no problems running cgminer with the 2pacs. Everything seems stable as far as the 2pac's go.
Maybe I missed something, but I was not under the impression you needed an advanced computer to run cgminer with some sticks. Do I need to get my hands on another Pi to run additional 2pac's or is there another way around this problem? Right now I am in the process of troubleshooting as best I can to see if it can stabilize as that might give more info as to what is going on.
Thank you in advance.
Maybe I missed something, but I was not under the impression you needed an advanced computer to run cgminer with some sticks. Do I need to get my hands on another Pi to run additional 2pac's or is there another way around this problem? Right now I am in the process of troubleshooting as best I can to see if it can stabilize as that might give more info as to what is going on.
Thank you in advance.
im having a similiar issue using my pi to run my avalon 741's and it reboots on its own about once every 18 hours and i cant figure out why it just reboots and goes back to running but does it all the time let me know if u find any answers
Still didn't experience to use Raspberry Pi as tools for mining but i try to help you.
Maybe you got a defective Raspberry Pi or your firmware/OS you use is corrupted tried to install a new fresh OS(Raspbian OS) i found tutorial here maybe it can help you out
https://bitcointalksearch.org/topic/super-tutorial-raspberry-piraspbiancgminertightvncwifi-at-boot-233392
For more other concern tried to post in cgminer official thread here https://bitcointalksearch.org/topic/official-cgminer-mining-software-thread-for-linuxwinosxmipsarmr-pi-4110-28402
Hope this one could help you..
Maybe you got a defective Raspberry Pi or your firmware/OS you use is corrupted tried to install a new fresh OS(Raspbian OS) i found tutorial here maybe it can help you out
https://bitcointalksearch.org/topic/super-tutorial-raspberry-piraspbiancgminertightvncwifi-at-boot-233392
For more other concern tried to post in cgminer official thread here https://bitcointalksearch.org/topic/official-cgminer-mining-software-thread-for-linuxwinosxmipsarmr-pi-4110-28402
Hope this one could help you..
Thanks. A few of those steps are on my list of things to do should my current troubleshooting not work. I will get it figured out one way or the other.
Still didn't experience to use Raspberry Pi as tools for mining but i try to help you.
Maybe you got a defective Raspberry Pi or your firmware/OS you use is corrupted tried to install a new fresh OS(Raspbian OS) i found tutorial here maybe it can help you out
https://bitcointalksearch.org/topic/super-tutorial-raspberry-piraspbiancgminertightvncwifi-at-boot-233392
For more other concern tried to post in cgminer official thread here https://bitcointalksearch.org/topic/official-cgminer-mining-software-thread-for-linuxwinosxmipsarmr-pi-4110-28402
Hope this one could help you..
Maybe you got a defective Raspberry Pi or your firmware/OS you use is corrupted tried to install a new fresh OS(Raspbian OS) i found tutorial here maybe it can help you out
https://bitcointalksearch.org/topic/super-tutorial-raspberry-piraspbiancgminertightvncwifi-at-boot-233392
For more other concern tried to post in cgminer official thread here https://bitcointalksearch.org/topic/official-cgminer-mining-software-thread-for-linuxwinosxmipsarmr-pi-4110-28402
Hope this one could help you..
my answer would be to not buy anymore hardware and sell what you have to some fool that doesnt realize what a waste of time, resources, and money they are.
That's very helpful for all of us who see this more as a hobby than anything.
...dick
my answer would be to not buy anymore hardware and sell what you have to some fool that doesnt realize what a waste of time, resources, and money they are.
I recently got a Pi and had no problems getting it set up for running 2pac's with cgminer. While I have been waiting for more hardware to come in (better Hub, more 2pacs) I was not having a problem running a few 2pacs. I now have 5 and after running them at stock freq the damn thing crashes and I have to unplug/plug the power back in to get it up and running once more. Once that happens, I have no problems running cgminer with the 2pacs. Everything seems stable as far as the 2pac's go.
Maybe I missed something, but I was not under the impression you needed an advanced computer to run cgminer with some sticks. Do I need to get my hands on another Pi to run additional 2pac's or is there another way around this problem? Right now I am in the process of troubleshooting as best I can to see if it can stabilize as that might give more info as to what is going on.
Thank you in advance.
Maybe I missed something, but I was not under the impression you needed an advanced computer to run cgminer with some sticks. Do I need to get my hands on another Pi to run additional 2pac's or is there another way around this problem? Right now I am in the process of troubleshooting as best I can to see if it can stabilize as that might give more info as to what is going on.
Thank you in advance.
Jump to: