Didn't understand what kind of hardware you are running on but if they are Gridseeds you can give a try to my project Minera that's a complete RPI image to monitor and control your miners. It runs a specific fork of CPUMiner with lot of features for GS.
Topic: Raspberry Pi with cgminer hangs after a little while or few hours (Read 2708 times)
Have the same problem with self-compiled cgminer under Raspberry Pi. However, there is a precompiled binary:
Any chance of a Pi image with compiled binary?
Here's a compiled binary built on raspbian: https://db.tt/UygLkqwd
this binary works fine stable day by day, week by week without interuptions. But have two dissapointes: 1. frequency is only up to 950 Mhz, 2) stratum above the target nonce issue. As a result, this is very good miner for non-overclocking Gridseeds connected directly to mining pools.
But in the case you are going to overclock your GC3355 over 1000MHz the best miner is cpuminer (minerd): https://github.com/siklon/cpuminer-gc3355. Possibly with Minera or something similar to control the farm.
If you don't want to run a bunch of cpuminers, I have posted modified cgminer sources to allow LTC-only mode: https://github.com/dtbartle/cgminer-gc3355. I have this running on a Raspberry Pi with 10 devices.
Any chance of a Pi image with compiled binary?
Here's a compiled binary built on raspbian: https://db.tt/UygLkqwd
this binary works fine stable day by day, week by week without interuptions. But have two dissapointes: 1. frequency is only up to 950 Mhz, 2) stratum above the target nonce issue. As a result, this is very good miner for non-overclocking Gridseeds connected directly to mining pools.
But in the case you are going to overclock your GC3355 over 1000MHz the best miner is cpuminer (minerd): https://github.com/siklon/cpuminer-gc3355. Possibly with Minera or something similar to control the farm.
I am mining using a Raspberry Pi with cgminer and it hangs after a little while or few hours.
I did read on some pages over the internet that this is due to a "memory paging issue". I don't know what this is and if or it's the correct reason.
Can someone help me with this issue?
I did read on some pages over the internet that this is due to a "memory paging issue". I don't know what this is and if or it's the correct reason.
Can someone help me with this issue?
Was running cgminer for a while on the RPi without problems, installed following this tutorial (without the PiMiner and display additions):
https://learn.adafruit.com/piminer-raspberry-pi-bitcoin-miner/install-cgminer
Now I'm using BFGMiner. One month and running. Of course all compiled on the Pi, no prebuilt binaries (if they exists somewhere).
Quote
PS: I am running Arch Linux on my RPi
Maybe that's the problem. Try with the official Raspbian distribution.
I am mining using a Raspberry Pi with cgminer and it hangs after a little while or few hours.
I did read on some pages over the internet that this is due to a "memory paging issue". I don't know what this is and if or it's the correct reason.
Can someone help me with this issue?
PS: I am running Arch Linux on my RPi
I did read on some pages over the internet that this is due to a "memory paging issue". I don't know what this is and if or it's the correct reason.
Can someone help me with this issue?
PS: I am running Arch Linux on my RPi
Jump to: