Topic: Replacement/Additional Antminer S1 fan? (Read 1626 times)
Dell (Delta) fans are good. look for ones like this http://www.ebay.com.au/itm/141372199742?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
i found a kit on ebay for about 15 that has a fan and a load of micro heat sinks - it looks like it might be able to do the job but that all depends on whether it actually makes a difference!
Ive got a pack of 50 mini ones that i had knocking about and i've put them on one side of the S1 and i'm noticing a drop of about 1-2C vs the other side without any - i suspect with an additional fan and maybe a cover over the top i could get the temps down even more...
Ive got a pack of 50 mini ones that i had knocking about and i've put them on one side of the S1 and i'm noticing a drop of about 1-2C vs the other side without any - i suspect with an additional fan and maybe a cover over the top i could get the temps down even more...
this fan is great
http://www.ebay.com/itm/Lot-of-3-Delta-120x38mm-fans-PFC1212DE-12V-3-24A-Warranty-/331311182672?pt=US_Server_Fans_Cooling_Systems&hash=item4d23af7350
are you uk based?
http://www.ebay.co.uk/itm/Delta-EFC1212DE-DC12V-1-20A-120mm-x-38mm-Internal-Case-Fan-with-4-Pin-Connector-/400661571353?pt=Computing_ComputerComponents_Fans_Heatsinks_SR&hash=item5d494a6719
i found a kit on ebay for about 15 that has a fan and a load of micro heat sinks - it looks like it might be able to do the job but that all depends on whether it actually makes a difference!
Ive got a pack of 50 mini ones that i had knocking about and i've put them on one side of the S1 and i'm noticing a drop of about 1-2C vs the other side without any - i suspect with an additional fan and maybe a cover over the top i could get the temps down even more...
Ive got a pack of 50 mini ones that i had knocking about and i've put them on one side of the S1 and i'm noticing a drop of about 1-2C vs the other side without any - i suspect with an additional fan and maybe a cover over the top i could get the temps down even more...
Could look into a fan like this: http://www.newegg.com/Product/Product.aspx?Item=N82E16835103069
I believe it's whats used on the Hyper 212 CPU coolers, but I can't say for certain. I've looked into getting one of those for my S1's but decided against it, because I figured I could live with the noise, plus save a few bucks.
So I haven't used it on an S1 before, but from looking at the specs and such, it appears it would be great for cooling an S1.
I believe it's whats used on the Hyper 212 CPU coolers, but I can't say for certain. I've looked into getting one of those for my S1's but decided against it, because I figured I could live with the noise, plus save a few bucks.
So I haven't used it on an S1 before, but from looking at the specs and such, it appears it would be great for cooling an S1.
I have 3 S1 miners all with a single fan, i'm planning on OC'ing them buit i want to keep them cool - does anyone recommended a particular fan to replace or add as an additional fan for push/pull configuration? Ive tried a standard delta 250CFM fan (non PWM) and it was nice and cool but not very quiet 
Would any 120mm PWM 38mm fan be ok? (Any recommendations for high CFM & low noise?)
Would any 120mm PWM 38mm fan be ok? (Any recommendations for high CFM & low noise?)
Jump to: