It was a BIOS setting, guys.
Changed Video from Automatic to PCI and now it works.
Topic: [Resolved] BAMT monitor stops getting signal (Read 605 times)
Okay so I finally got BAMT 0.5c configured and it started hashing then the display cuts out... "No Signal".
The computer is still on and is reachable via SSH but it does not mine in this state.
What could be the problem here? I've tried two different power supplies and that doesn't seem to be the problem. Could it be my config? I didn't get a chance to touch the overclocking settings, and the display goes out before I can reach it anyway when I tried to underclock.
The rig is an IBM ThinkCentre A55 with a Radeon 6790 installed.
The computer is still on and is reachable via SSH but it does not mine in this state.
What could be the problem here? I've tried two different power supplies and that doesn't seem to be the problem. Could it be my config? I didn't get a chance to touch the overclocking settings, and the display goes out before I can reach it anyway when I tried to underclock.
The rig is an IBM ThinkCentre A55 with a Radeon 6790 installed.
Jump to: