Author

Topic: Rig Ready, but Need Software Help (Read 860 times)

full member
Activity: 164
Merit: 100
March 13, 2012, 01:16:37 AM
#8
Take a look at this guide, not exactly what your after, but the first 6 steps show you how to create a bootable USB with linux.

https://bitcointalksearch.org/topic/guidehow-to-setup-an-automated-headless-linuxcoin-mining-rig-watchdog-29021


Thanks alot Smiley

That is the guide for linuxcoin. I feel Bamt is way better, simple.
member
Activity: 87
Merit: 10
March 12, 2012, 08:27:11 PM
#7
What card do you have?

Sorry forgot that little bit of info.

Sapphire HD 5850 xtreame.

member
Activity: 119
Merit: 10
March 12, 2012, 06:47:04 PM
#6
Take a look at this guide, not exactly what your after, but the first 6 steps show you how to create a bootable USB with linux.

https://bitcointalksearch.org/topic/guidehow-to-setup-an-automated-headless-linuxcoin-mining-rig-watchdog-29021


Thanks alot Smiley
member
Activity: 119
Merit: 10
March 12, 2012, 05:53:39 PM
#5
Splirow, could you post the guide here? Smiley

I'm new to linux too, and with harddrive prices being high as they are, running miners of USB sticks would be pretty sweet!
full member
Activity: 164
Merit: 100
March 12, 2012, 04:46:39 PM
#4
What card do you have?
member
Activity: 87
Merit: 10
March 12, 2012, 02:39:19 PM
#3
Well I got BAMT installed and I got one card working, but I am noticing a smaller issue.

I have the card clocked out at 900 GPU, but im only getting 214 hash on average and only 64% load.

How can i improve the load and the hash.  I only have the setting tweaked using the AMD Overdrive program and not through BAMT config yet.  Could that be the issue?

When I use GUminer, I get 300-320 from the same make and model of cards. 

Any help would be greatful.
full member
Activity: 164
Merit: 100
March 08, 2012, 03:12:23 AM
#2
I will pm u
member
Activity: 87
Merit: 10
March 07, 2012, 10:48:54 PM
#1
Evening everyone,

Well, I got one of the three rigs ready to go, but im stuck at the software part.

I have been advised to use BAMT, since these will be stand-alone rigs, but I am 100% ignorant when it comes to Linux.

As it stands now, I have a naked 4gb flash drive ready to go, but I need a guide or step-by-step to go further.

Basically, I need steps for Linux install, BAMT install, and how to "remote" monitor from a windows 7 based computer.


Any help or direction would be grateful and rewarded.


Thank in advance.

-elrodvoss
Jump to: