Ok, so if I drop the LED monitoring support (Uptime) and monitor via IP then it would be possible to control 9x rigs using this device.
The NodeMCU supports 9x digital input pins D0-D8 so essential allowing 9 rigs to be controlled.
https://raw.githubusercontent.com/lvidarte/esp8266/master/nodemcu_pins.png
These devices would be controlled over local wifi or remotely via nat/pat.
I may also develop a NodeRed RaspberryPi type controller to monitor and control a bunch of these devices from one web interface.
Naming
Monitoring
Auto Reboot (if your wifi is stable enough)
Grouping
Would be pretty easy to implement too
Topic: Rig Reset Tool - RIGCOVER (Read 256 times)
smos rig re-setter tool is out of stock....!!!
any other with out their interference just local control not to owner site like ethos
any other with out their interference just local control not to owner site like ethos
I don't mean to rain on your idea but there are already a couple other options out there cheaper.
Smos has a rig resetter less than $200 and supports 8 gpu
Ethmonitoring.com has one for $120, supports 8 gpu and interfaces directly into the ethmonitoring.com ecosystem. Has auto reboot.
Your device might be OK for people who only have a couple of rigs though!
Smos has a rig resetter less than $200 and supports 8 gpu
Ethmonitoring.com has one for $120, supports 8 gpu and interfaces directly into the ethmonitoring.com ecosystem. Has auto reboot.
Your device might be OK for people who only have a couple of rigs though!
Hi Everyone,
I'm trying to gauge level of interest in a custom tool I have built. It's essentially a recovery device for when your mining rig locks up or you somehow lose access and you don't have immediate physical access to the rig and require the motherboard resetting or powering down then up.
Features:
Future Features
https://image.ibb.co/iLbuLn/Resetter.png
It's currently based on a NodeMCU, initially I will be selling these for £20/$28 each possibly lower depending on hardware cost.
I'll upload a picture of the hardware later.
Let me know what you think and if you have any suggestions.
I'm trying to gauge level of interest in a custom tool I have built. It's essentially a recovery device for when your mining rig locks up or you somehow lose access and you don't have immediate physical access to the rig and require the motherboard resetting or powering down then up.
Features:
- Connects directly to the power/reset and led pins of an ATX motherboard
- Remotely (wifi) Power Up Mining Rig
- Remotely (wifi) Power Down Mining Rig
- Remotely (wifi) Force Shutdown Mining Rig
- Remotely (wifi) Reset Mining Rig
- Remotely (wifi) monitor uptime
- Web UI
- Manual override switch allowing local physical access
Future Features
- User authentication
- MQTT Support
https://image.ibb.co/iLbuLn/Resetter.png
It's currently based on a NodeMCU, initially I will be selling these for £20/$28 each possibly lower depending on hardware cost.
I'll upload a picture of the hardware later.
Let me know what you think and if you have any suggestions.
Jump to: