rig shut down!!!! 2x r9 290 | Bitcointalksearch.org

nakataf01

newbie

Activity: 11

Merit: 0

Quote from: Ryuh on November 15, 2017, 06:56:34 AM

Ok, get GPU-Z or Afterburner and watch the cards stats when you start mining.
Use Afterburner and make fans at 80% just to experiment if this is temperature issue.

not a gpu temerature both gpu work fine in single mod.
i'm thinking it's motherboard probleme

Ryuh

full member

Activity: 282

Merit: 100

Ok, get GPU-Z or Afterburner and watch the cards stats when you start mining.
Use Afterburner and make fans at 80% just to experiment if this is temperature issue.

nakataf01

newbie

Activity: 11

Merit: 0

Quote from: Ryuh on November 15, 2017, 04:58:27 AM

Do you watch the temperatures of the cards and CPU? Are they normal level?
Do you use the mining drivers? What brand of PSU's do you use?

temperature r9 290 80°
temperature r9 290x 84°
for the driver's 'im using the lastest driver's offered by AMD
PSU BRAND OCZ 500 WATT
PSU2 LC POWER 2.3 6600 / 600 WATT.

nakataf01

newbie

Activity: 11

Merit: 0

Quote from: ?? on ??

hi man
i think for sure
psu good, all good,

it s your cable going to riser and to GPU

when start ining gpu would pump power,
cables with time dosen t pass requirement power,

i have problem with one 6gpu rig
every time i change those cables

i'm not using riser's
both card are pluged to board directly

Ryuh

full member

Activity: 282

Merit: 100

Do you watch the temperatures of the cards and CPU? Are they normal level?
Do you use the mining drivers? What brand of PSU's do you use?

adaseb

legendary

Activity: 3808

Merit: 1723

Quote from: nakataf01 on November 15, 2017, 04:01:28 AM

Quote from: adaseb on November 15, 2017, 03:29:44 AM

How do you start the second PSU ?

psu grounding

Start that PSU first and then 0.5 second later start the main PSU.

If it mines for 2-3 minutes and then stops, one of those PSU is bad. Either starts overheating or hits the current limit for a particular rail.

nakataf01

newbie

Activity: 11

Merit: 0

Quote from: adaseb on November 15, 2017, 03:29:44 AM

How do you start the second PSU ?

psu grounding

nakataf01

newbie

Activity: 11

Merit: 0

Quote from: Ryuh on November 15, 2017, 03:37:46 AM

Sorry i'm kinda confused here. It's just the fan on the Sapphire card stop spinning, but Claymore is working with no errors?

the pc shutdown suddenly after fan on sapphire card stop spinning " 2-3 minute of mining".
claymore work with no errors.

Ryuh

full member

Activity: 282

Merit: 100

Sorry i'm kinda confused here. It's just the fan on the Sapphire card stop spinning, but Claymore is working with no errors?

adaseb

legendary

Activity: 3808

Merit: 1723

How do you start the second PSU ?

nakataf01

newbie

Activity: 11

Merit: 0

Quote from: davemanet on November 15, 2017, 03:04:46 AM

Try stock and no overclock. Do one card at a time.

both card work fine in sigle gpu mod.

leonix007

sr. member

Activity: 1008

Merit: 297

Grow with community

Quote from: nakataf01 on November 15, 2017, 02:48:49 AM

Quote from: leonix007 on November 15, 2017, 02:43:17 AM

Quote from: nakataf01 on November 15, 2017, 02:35:40 AM

hi,
well this is my configuration:
gigabyte ga-h87-hd3.
4 gb ram ddr3
cup: celeron g1820.
msi r9 290x installed in pciex x16 3.0
shapphire r9 290 installed in pciex x 4
psu of 500 watt for the motherboard and the sapphire r9 290.
psu of 600 watt for the msi r9 290x only.
when i start the rig everything is fine then the fan of sapphire stop. after i lunch clymore's they start again for about 3 minute then everything colapse.

Did you mean Sudden Shutdown? what's your OS? have any error's seen?

Quote

what could possibly is wrong?
i think i should switch the psu so the main psu feed the msi in pci ex x 16 and the 2 nd psu feed sapphire in pci ex x4.
any thought's??!!!

I don't think this is the case, just want to know more details on errors appear if there's any

os: windows 7 64 bit
yes sudden shutdown, no error seen only fan stop of sapphire r9

Do basic Isolations, start with single GPU put in PCI-e x16 slot, no risers, set aside second GPU and PSU. then fired up miner

if this is successful, you have now somewhat an idea what is the culprit.

davemanet

full member

Activity: 336

Merit: 100

Try stock and no overclock. Do one card at a time.

nakataf01

newbie

Activity: 11

Merit: 0

Quote from: leonix007 on November 15, 2017, 02:43:17 AM

Quote from: nakataf01 on November 15, 2017, 02:35:40 AM

hi,
well this is my configuration:
gigabyte ga-h87-hd3.
4 gb ram ddr3
cup: celeron g1820.
msi r9 290x installed in pciex x16 3.0
shapphire r9 290 installed in pciex x 4
psu of 500 watt for the motherboard and the sapphire r9 290.
psu of 600 watt for the msi r9 290x only.
when i start the rig everything is fine then the fan of sapphire stop. after i lunch clymore's they start again for about 3 minute then everything colapse.

Did you mean Sudden Shutdown? what's your OS? have any error's seen?

Quote

what could possibly is wrong?
i think i should switch the psu so the main psu feed the msi in pci ex x 16 and the 2 nd psu feed sapphire in pci ex x4.
any thought's??!!!

I don't think this is the case, just want to know more details on errors appear if there's any

os: windows 7 64 bit
yes sudden shutdown, no error seen only fan stop of sapphire r9

leonix007

sr. member

Activity: 1008

Merit: 297

Grow with community

Quote from: nakataf01 on November 15, 2017, 02:35:40 AM

hi,
well this is my configuration:
gigabyte ga-h87-hd3.
4 gb ram ddr3
cup: celeron g1820.
msi r9 290x installed in pciex x16 3.0
shapphire r9 290 installed in pciex x 4
psu of 500 watt for the motherboard and the sapphire r9 290.
psu of 600 watt for the msi r9 290x only.
when i start the rig everything is fine then the fan of sapphire stop. after i lunch clymore's they start again for about 3 minute then everything colapse.

Did you mean Sudden Shutdown? what's your OS? have any error's seen?

Quote

what could possibly is wrong?
i think i should switch the psu so the main psu feed the msi in pci ex x 16 and the 2 nd psu feed sapphire in pci ex x4.
any thought's??!!!

I don't think this is the case, just want to know more details on errors appear if there's any

adaseb

legendary

Activity: 3808

Merit: 1723

You have more than enough power.

Use stock voltage/stock clocks with your r9 290 and see if it crashes then.

nakataf01

newbie

Activity: 11

Merit: 0

hi,
well this is my configuration:
gigabyte ga-h87-hd3.
4 gb ram ddr3
cup: celeron g1820.
msi r9 290x installed in pciex x16 3.0
shapphire r9 290 installed in pciex x 4
psu of 500 watt for the motherboard and the sapphire r9 290.
psu of 600 watt for the msi r9 290x only.
when i start the rig everything is fine then the fan of sapphire stop. after i lunch clymore's they start again for about 3 minute then everything colapse.
what could possibly is wrong?
i think i should switch the psu so the main psu feed the msi in pci ex x 16 and the 2 nd psu feed sapphire in pci ex x4.
any thought's??!!!

Topic: rig shut down!!!! 2x r9 290 (Read 377 times)