Don't shop on amazon for risers. The brands are worthless, the "versions" are worthless, they are just reselling you a random batch of risers for a silly price they got from china.
There are dozens of factories there splurting out risers in every color, version and design they currently feel is hot. Out of the 100+ risers i've bought, around 20% are crap in one way or another, I've noticed no pattern in how to spot them. Some are black, some are blue, some are v3, some v9, some have an extra capacitor, some an extra transistor.. whatever.
Unless you are a major purchaser looking for thousands of units you have no real hope of finding out what you're buying with unmarked chinese electronics anyways. Best you can do is just go on some chinese amazon equivalent (like aliexpress), get a few samples from resellers with big batches (for much cheaper than you find on amazon btw) and hope that the batch doesn't run out before you take delivery so you can order more of the good ones.
Topic: Risers: Advice needed with my delima (Read 159 times)
These things look identical to the Mintcell ones I have. May be manufactured at the same place.
@MarkAz
Going off of your information, I ordered a 6 of those USB cables. In my mind, it'll be good to use them to test out what I have now.
Going off of your information, I ordered a 6 of those USB cables. In my mind, it'll be good to use them to test out what I have now.
Glad to be of assistance - it's cheap and simple to test, and as I said, most of the time it solved any issues I've had.
Thanks for the information!!
@Onbusy
Man, that's a good price. I'm currently looking into those now.
@MarkAz
Going off of your information, I ordered a 6 of those USB cables. In my mind, it'll be good to use them to test out what I have now.
@Onbusy
Man, that's a good price. I'm currently looking into those now.
@MarkAz
Going off of your information, I ordered a 6 of those USB cables. In my mind, it'll be good to use them to test out what I have now.
I run these Mintcell risers, so far I'm 6 out of 6 good ones. I use the 6-pin power connector with no adapters. Newegg also has the Mintcell Ver 009S on sale.
https://www.newegg.com/Product/Product.aspx?Item=9SIA7256P88179
https://www.newegg.com/Product/Product.aspx?Item=9SIA7256P88179
You should read the forums a bit - your problem is nothing new or unique, risers are always a bit of a balancing act to get right. For all the risers I use, the first thing I do is replace the USB cables they come with, with these:
http://amzn.to/2rTWrCJ
They cost more but more than make up for it in reduced problems - you can try other cheaper brands and may get success, but for my builds I always go with these and haven't had an issue.
In the literally thousands of breakouts I've built systems with, I would say only a handful of them were actually defective - all the other ones were related to the USB cable.
And in terms of one version being better than another - they all were about the same for me, the only real difference is how you connect power, and I always use the PCIe 6-pin versions.
http://amzn.to/2rTWrCJ
They cost more but more than make up for it in reduced problems - you can try other cheaper brands and may get success, but for my builds I always go with these and haven't had an issue.
In the literally thousands of breakouts I've built systems with, I would say only a handful of them were actually defective - all the other ones were related to the USB cable.
And in terms of one version being better than another - they all were about the same for me, the only real difference is how you connect power, and I always use the PCIe 6-pin versions.
https://www.amazon.com/gp/product/B07333WKX7/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
I've purchased about 12 of these total. My last batch, 3 of them had issues. I'm either getting bad stability, or my cards wont even show. Not only that, but 2 1x adapters wont even fit into a PCI-E slot. The notches don't appear to be cut correctly.
I haven't decided if I'm going to get a refund for the last 6 that I purchased, or contact S-Union to see if they'll just swap out these 3 that I know are faulty. The thing is, even running the one's that are working I feel are in question. This 6x 1070 ti rig is by far more touchy with OC'n than my other. Both are exactly the same.
I noticed on the past few builds from BitsBeTrippin, he's used...
https://www.amazon.com/Onvian-Mining-Dedicated-Graphics-Supply/dp/B01MU51491
The only real difference I see between the 2 are the capacitors. The ones I have are 330, and the other uses 270.
I could very easily have the same issues with the Onvian, but I tend to use things that I see others that are more experienced are using.
If you were in my situation, what would you do?
Is there a better set of Risers that I should be looking at?
I've purchased about 12 of these total. My last batch, 3 of them had issues. I'm either getting bad stability, or my cards wont even show. Not only that, but 2 1x adapters wont even fit into a PCI-E slot. The notches don't appear to be cut correctly.
I haven't decided if I'm going to get a refund for the last 6 that I purchased, or contact S-Union to see if they'll just swap out these 3 that I know are faulty. The thing is, even running the one's that are working I feel are in question. This 6x 1070 ti rig is by far more touchy with OC'n than my other. Both are exactly the same.
I noticed on the past few builds from BitsBeTrippin, he's used...
https://www.amazon.com/Onvian-Mining-Dedicated-Graphics-Supply/dp/B01MU51491
The only real difference I see between the 2 are the capacitors. The ones I have are 330, and the other uses 270.
I could very easily have the same issues with the Onvian, but I tend to use things that I see others that are more experienced are using.
If you were in my situation, what would you do?
Is there a better set of Risers that I should be looking at?
Jump to: